Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX9172EKA+T

Analog Devices Inc./Maxim Integrated · LVDS ICs · SOT-23-8

MAX9172EKA+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Positive power-supply input (3.0V to 3.6V); bypass with a 0.1µF and a 0.001µF capacitor to GND, smallest capacitor closest to the pin.
2 GND power_in Ground.
3 OUT1 output Receiver output 1, LVTTL/LVCMOS compatible, driven high when the channel 1 input is open, undriven shorted or undriven terminated.
4 OUT2 output Receiver output 2, LVTTL/LVCMOS compatible, driven high when the channel 2 input is open, undriven shorted or undriven terminated.
5 IN2- input Inverting differential receiver input 2.
6 IN2+ input Noninverting differential receiver input 2.
7 IN1+ input Noninverting differential receiver input 1.
8 IN1- input Inverting differential receiver input 1.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOT-23-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Input High Threshold VTH -40 0 mV Figure 1 2
Differential Input Low Threshold VTL -100 -40 mV Figure 1 2
Input Current (Noninverting Input) IIN+ -5 -2.1 0.5 µA Figure 1 2
Power-Off Input Current (Noninverting Input) IIN+OFF -0.5 0 0.5 µA VIN+ = 0 to 3.6V, VIN- = 0 to 3.6V, VCC = 0 or open (Figure 1) 2
Input Current (Inverting Input) IIN- -0.5 4.4 10 µA Figure 1 2
Power-Off Input Current (Inverting Input) IIN-OFF -0.5 0 0.5 µA VIN+ = 0 to 3.6V, VIN- = 0 to 3.6V, VCC = 0 or open (Figure 1) 2
Output High Voltage VOH 2.7 3.2 V IOH = -4.0mA; open, undriven short, or undriven parallel termination 2
Output Low Voltage VOL 0.1 0.4 V IOL = 4.0mA, VID = -100mV 2
Output Short-Circuit Current IOS -120 -77 -45 mA VOUT_ = 0 (Note 3) 2
Supply Current (MAX9172) ICC 7 9 mA Inputs open 2
Differential Propagation Delay High to Low tPHLD 1 1.65 2.5 ns Figures 2, 3 3
Differential Propagation Delay Low to High tPLHD 1 1.62 2.5 ns Figures 2, 3 3
Differential Pulse Skew /tPHLD - tPLHD/ tSKD1 30 400 ps Figures 2, 3 (Note 7) 3
Differential Channel-to-Channel Skew tSKD2 40 500 ps Figures 2, 3 (Note 8) 3
Differential Part-to-Part Skew tSKD3 1 ns Figures 2, 3 (Note 9) 3
Differential Part-to-Part Skew tSKD4 1.5 ns Figures 2, 3 (Note 10) 3
Rise Time tTLH 0.55 0.8 ns Figures 2, 3 3
Fall Time tTHL 0.51 0.8 ns Figures 2, 3 3
Maximum Operating Frequency fMAX 250 300 MHz All channels switching, VOL(MAX) = 0.4V, VOH(MIN) = 2.7V, 40% < duty cycle < 60% 3
VCC to GND VCC -0.3 4 V 2
IN_+, IN_- to GND -0.3 4 V 2
Operating Temperature Range -40 85 °C 2
Junction Temperature 150 °C 2
Storage Temperature Range -65 150 °C 2
ESD Protection Human Body Model (IN_+, IN_-) -13 13 kV Human Body Model 2
Lead Temperature 300 °C soldering, 10s 2
Supply Voltage VCC 3 3.3 3.6 V Electrical characteristics test range 2

CAD (KiCad official)

  • Symbol: MAX9172EKA+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: max9172eka-t-etched.step / max9172eka-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max9172eka-t.step / max9172eka-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (12 pp, sha256 91333c2a75a7e4f2, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF