component
MAX9112EKA+T
Public Made by Adomby adom
Maxim Integrated LVDS ICs, SOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX9112EKA+T
Maxim Integrated · LVDS ICs · SOT-23-8
MAX9112EKA+T from Maxim Integrated, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN1 | input | LVTTL/CMOS transmitter input for channel 1; logic high requires VIH of at least 2.0V and logic low requires VIL of at most 0.8V. |
| 2 | GND | power_in | Ground reference for the device; all voltages are referred to this pin. |
| 3 | DIN2 | input | LVTTL/CMOS transmitter input for channel 2; logic high requires VIH of at least 2.0V and logic low requires VIL of at most 0.8V. |
| 4 | VCC | power_in | Positive supply, specified from +3.0V to +3.6V with 3.3V typical. |
| 5 | DO2- | output | Inverting LVDS transmitter output for channel 2, complementary to DO2+, with a 250mV to 450mV differential swing across a 100Ω load. |
| 6 | DO2+ | output | Noninverting LVDS transmitter output for channel 2, with a 250mV to 450mV differential swing across a 100Ω load. |
| 7 | DO1+ | output | Noninverting LVDS transmitter output for channel 1, with a 250mV to 450mV differential swing across a 100Ω load. |
| 8 | DO1- | output | Inverting LVDS transmitter output for channel 1, complementary to DO1+, with a 250mV to 450mV differential swing across a 100Ω load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Output Voltage | VOD | 250 | 350 | 450 | mV | Figure 1 | 2 |
| Change in Magnitude of Output Voltage for Complementary Output States | ΔVOD | 0 | 2 | 35 | mV | Figure 1 | 2 |
| Offset Voltage | VOS | 1.125 | 1.25 | 1.375 | V | Figure 1 | 2 |
| Change in Magnitude of Offset Voltage for Complementary Output States | ΔVOS | 0 | 2 | 25 | mV | Figure 1 | 2 |
| Power-Off Leakage Current | IO(OFF) | -10 | 10 | µA | VDO_ _ = 0 or VCC, VCC = 0 or open | 2 | |
| Short-Circuit Output Current | IO(SHORT) | -20 | mA | DIN_ = VCC, VDO_+ = 0 or DIN_ = GND, VDO_- = 0 | 2 | ||
| Input High Voltage | VIH | 2 | V | 2 | |||
| Input Low Voltage | VIL | 0.8 | V | 2 | |||
| Input Current High | IIH | 0 | 10 | 20 | µA | DIN_ = VCC or 2V | 2 |
| Input Current Low | IIL | -20 | -3 | 0 | µA | DIN_ = GND or 0.8V | 2 |
| No-Load Supply Current | ICC | 4.5 | 6 | mA | No load, DIN_ = VCC or 0 | 2 | |
| Supply Current (MAX9112) | ICC | 9.4 | 13 | mA | DIN_ = VCC or 0 | 2 | |
| Differential High-to-Low Propagation Delay | tPHLD | 1.54 | 2.5 | ns | Figure 1 | 2 | |
| Differential Low-to-High Propagation Delay | tPLHD | 1.58 | 2.5 | ns | Figure 1 | 2 | |
| Differential Pulse Skew | tSKD1 | 40 | 250 | ps | (Note 6) | 2 | |
| Channel-to-Channel Skew | tSKD2 | 70 | 400 | ps | (Note 7) | 2 | |
| Part-to-Part Skew | tSKD3 | 1 | ns | (Note 8) | 3 | ||
| Part-to-Part Skew (over supply and temperature) | tSKD4 | 1.5 | ns | (Note 9) | 3 | ||
| High-to-Low Transition Time | tTHL | 0.25 | 0.6 | 1 | ns | VCC = +3.3V, RL = 100Ω, CL = 5pF | 3 |
| Low-to-High Transition Time | tTLH | 0.25 | 0.6 | 1 | ns | VCC = +3.3V, RL = 100Ω, CL = 5pF | 3 |
| Maximum Operating Frequency | fMAX | 250 | MHz | (Note 10) | 3 | ||
| Supply Voltage | VCC | 3 | 3.3 | 3.6 | V | Operating conditions for electrical table; typ at TA = +25°C | 2 |
| Load Resistance Tolerance | RL | -1 | 1 | % | RL = 100Ω ±1% | 2 | |
| Supply Voltage (VCC to GND) | VCC | -0.3 | 4 | V | Supply Voltage (VCC to GND) | 2 | |
| Input Voltage (VDIN_ to GND) | VDIN_ | -0.3 | V | Maximum is VCC + 0.3V | 2 | ||
| Output Voltage (VDO_+, VDO_- to GND or VCC) | VDO_ | -0.3 | 3.9 | V | VDO_+, VDO_- to GND or VCC | 2 | |
| ESD Protection (Human Body Model, DO_+, DO_-) | ESD | 11 | kV | Human Body Model, DO_+, DO_-; printed as ±11kV | 2 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (soldering, 10s) | TLEAD | 300 | °C | soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX9112EKA+T - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
max9112eka-t-etched.step/max9112eka-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max9112eka-t.step/max9112eka-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (9 pp, sha256
9f2dd356156a5291, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).