main
Ray
Publish 0.1.0
37773cb
MAX9109EUT+T
Analog Devices Inc./Maxim Integrated · Comparators · SOT-23-6
MAX9109EUT+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output is TTL-compatible and requires no external pullup circuitry. |
| 2 | GND | power_in | Ground reference for the device; the input common-mode range extends to 200mV below ground (VCMR minimum -0.2V). |
| 3 | IN+ | input | Noninverting comparator input with a common-mode input voltage range of -0.2V to VCC - 1.5V. |
| 4 | IN- | input | Inverting comparator input; the common-mode input voltage is limited to -0.3V to (VCC + 0.3V) and input current to ±20mA. |
| 5 | LE | input | Latch enable input: the latch is transparent when LE is low and holds the output when LE is high, with VIH of 2.0V minimum and VIL of 0.8V maximum. |
| 6 | VCC | power_in | Positive supply with an operating range of 4.5V to 5.5V and an absolute maximum of 6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VCC | 4.5 | 5.5 | V | Guaranteed by PSRR | 2 | |
| Input Offset Voltage | VOS | 0.5 | 1.6 | mV | TA = +25°C (Note 2) | 2 | |
| Input Offset Voltage | VOS | 4 | mV | TA = TMIN to TMAX (Note 2) | 2 | ||
| Input Hysteresis | VHYST | 2 | mV | Note 3 | 2 | ||
| Input Bias Current | IB | 125 | 350 | nA | 2 | ||
| Input Offset Current | IOS | 25 | 80 | nA | 2 | ||
| Input Voltage Range | VCMR | -0.2 | V | Note 4; max is VCC - 1.5 | 2 | ||
| Common-Mode Rejection Ratio | CMRR | 50 | 1000 | μV/V | VCC = 5.5V (Note 5) | 2 | |
| Power-Supply Rejection Ratio | PSRR | 50 | 1000 | μV/V | 4.5V ≤ VCC ≤ 5.5V | 2 | |
| Output High Voltage | VOH | 3 | 3.5 | V | ISOURCE = 100μA | 2 | |
| Output Low Voltage | VOL | 0.35 | 0.6 | V | ISINK = 3.2mA | 2 | |
| Output Low Voltage | VOL | 0.4 | V | ISINK = 8mA | 2 | ||
| Supply Current Per Comparator | ICC | 0.35 | 0.7 | mA | VCC = +5.5V, all outputs low | 2 | |
| Output Rise Time | tr | 12 | ns | VOUT = 0.4V to 2.4V, CL = 10pF | 2 | ||
| Output Fall Time | tf | 6 | ns | VOUT = 2.4V to 0.4V, CL = 10pF | 2 | ||
| Propagation Delay | tPD+, tPD- | 25 | ns | VIN = 100mV, VOD = 10mV | 3 | ||
| Differential Propagation Delay | ΔtPD | 1 | ns | VIN = 100mV, VOD = 10mV (Note 6) | 3 | ||
| Propagation Delay Skew | tPDskew | 5 | ns | VIN = 100mV, VOD = 10mV (Note 7) | 3 | ||
| Latch Input Voltage High | VIH | 2 | V | Note 8 | 3 | ||
| Latch Input Voltage Low | VIL | 0.8 | V | Note 8 | 3 | ||
| Latch Input Current | IIH, IIL | 0.4 | 1 | µA | Note 8 | 3 | |
| Latch Setup Time | ts | 2 | ns | Note 8 | 3 | ||
| Latch Hold Time | th | 2 | ns | Note 8 | 3 | ||
| Supply Voltage | VCC | 6 | V | VCC to GND | 2 | ||
| Current into Input Pins | -20 | 20 | mA | ±20mA | 2 | ||
| Output Short-Circuit Duration to VCC or GND | 10 | s | 2 | ||||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX9109EUT+T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
max9109eut-t-etched.step/max9109eut-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max9109eut-t.step/max9109eut-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (9 pp, sha256
7ca6c390bfe578db, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX9109EUT+T
**Analog Devices Inc./Maxim Integrated** · Comparators · SOT-23-6
MAX9109EUT+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output is TTL-compatible and requires no external pullup circuitry. |
| 2 | GND | power_in | Ground reference for the device; the input common-mode range extends to 200mV below ground (VCMR minimum -0.2V). |
| 3 | IN+ | input | Noninverting comparator input with a common-mode input voltage range of -0.2V to VCC - 1.5V. |
| 4 | IN- | input | Inverting comparator input; the common-mode input voltage is limited to -0.3V to (VCC + 0.3V) and input current to ±20mA. |
| 5 | LE | input | Latch enable input: the latch is transparent when LE is low and holds the output when LE is high, with VIH of 2.0V minimum and VIL of 0.8V maximum. |
| 6 | VCC | power_in | Positive supply with an operating range of 4.5V to 5.5V and an absolute maximum of 6V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VCC | 4.5 | | 5.5 | V | Guaranteed by PSRR | 2 |
| Input Offset Voltage | VOS | | 0.5 | 1.6 | mV | TA = +25°C (Note 2) | 2 |
| Input Offset Voltage | VOS | | | 4 | mV | TA = TMIN to TMAX (Note 2) | 2 |
| Input Hysteresis | VHYST | | 2 | | mV | Note 3 | 2 |
| Input Bias Current | IB | | 125 | 350 | nA | | 2 |
| Input Offset Current | IOS | | 25 | 80 | nA | | 2 |
| Input Voltage Range | VCMR | -0.2 | | | V | Note 4; max is VCC - 1.5 | 2 |
| Common-Mode Rejection Ratio | CMRR | | 50 | 1000 | μV/V | VCC = 5.5V (Note 5) | 2 |
| Power-Supply Rejection Ratio | PSRR | | 50 | 1000 | μV/V | 4.5V ≤ VCC ≤ 5.5V | 2 |
| Output High Voltage | VOH | 3 | 3.5 | | V | ISOURCE = 100μA | 2 |
| Output Low Voltage | VOL | | 0.35 | 0.6 | V | ISINK = 3.2mA | 2 |
| Output Low Voltage | VOL | | | 0.4 | V | ISINK = 8mA | 2 |
| Supply Current Per Comparator | ICC | | 0.35 | 0.7 | mA | VCC = +5.5V, all outputs low | 2 |
| Output Rise Time | tr | | 12 | | ns | VOUT = 0.4V to 2.4V, CL = 10pF | 2 |
| Output Fall Time | tf | | 6 | | ns | VOUT = 2.4V to 0.4V, CL = 10pF | 2 |
| Propagation Delay | tPD+, tPD- | | 25 | | ns | VIN = 100mV, VOD = 10mV | 3 |
| Differential Propagation Delay | ΔtPD | | 1 | | ns | VIN = 100mV, VOD = 10mV (Note 6) | 3 |
| Propagation Delay Skew | tPDskew | | 5 | | ns | VIN = 100mV, VOD = 10mV (Note 7) | 3 |
| Latch Input Voltage High | VIH | 2 | | | V | Note 8 | 3 |
| Latch Input Voltage Low | VIL | | | 0.8 | V | Note 8 | 3 |
| Latch Input Current | IIH, IIL | | 0.4 | 1 | µA | Note 8 | 3 |
| Latch Setup Time | ts | | 2 | | ns | Note 8 | 3 |
| Latch Hold Time | th | | 2 | | ns | Note 8 | 3 |
| Supply Voltage | VCC | | | 6 | V | VCC to GND | 2 |
| Current into Input Pins | | -20 | | 20 | mA | ±20mA | 2 |
| Output Short-Circuit Duration to VCC or GND | | | | 10 | s | | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | soldering, 10s | 2 |
## CAD (KiCad official)
- Symbol: `MAX9109EUT+T`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `max9109eut-t-etched.step` / `max9109eut-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max9109eut-t.step` / `max9109eut-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max9107-max9109.pdf) (9 pp, sha256 `7ca6c390bfe578db`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max9109eut-t-datasheet.pdf)