main
History Download
Ray Publish 0.1.0 b075166

MAX9040AEUK+T

Analog Devices Inc./Maxim Integrated · IC · SOT-23-5

MAX9040AEUK+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Comparator push-pull rail-to-rail output that sinks and sources up to 8mA.
2 VEE power_in Negative supply voltage, which is the ground reference for the device (VEE = 0V in the test conditions).
3 IN+ input Comparator noninverting input with a common-mode range extending 250mV beyond each supply rail (VEE - 0.25V to VCC + 0.25V at +25°C).
4 REF output Precision voltage reference output of 2.048V for the MAX9040, which can sink or source up to 500μA of load current.
5 VCC power_in Positive supply voltage, 2.5V to 5.5V for the MAX9040.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOT-23-5
Category
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VCC 2.5 5.5 V MAX9040-MAX9043 2
Input Offset Voltage VOS -5 0.5 5 mV TA = +25°C, over entire common-mode range 2
Input Offset Voltage VOS -7 7 mV TA = -40°C to +85°C 2
Input Hysteresis VHYST -3 3 mV 2
Input Bias Current IB -10 0.001 10 nA Specified common-mode range 2
Input Offset Current IOS -0.5 0.5 pA Specified common-mode range 2
Common-Mode Rejection Ratio CMRR 52 80 dB Specified common-mode range 2
Power-Supply Rejection Ratio PSRR 55 80 dB MAX9040-MAX9043, 2.5V ≤ VCC ≤ 5.5V 2
Input Capacitance CIN 2.5 pF 2
Supply Current MAX9040/MAX9041/MAX9050/MAX9051 ICC 47 67 µA VCC = 2.7V 2
Supply Current MAX9040/MAX9041/MAX9050/MAX9051 ICC 52 72 µA VCC = 5V 2
Supply Current MAX9042/MAX9043/MAX9052/MAX9053 ICC 55 80 µA VCC = 2.7V 2
Supply Current MAX9042/MAX9043/MAX9052/MAX9053 ICC 60 85 µA VCC = 5V 2
Output Short-Circuit Current ISC 95 mA VOUT = VEE or VCC, VCC = 5V 2
Output Short-Circuit Current ISC 35 mA VOUT = VEE or VCC, VCC = 2.7V 2
Output Voltage Low VOL 0.2 0.55 V VCC = 5V, ISINK = 8mA 2
Output Voltage Low VOL 0.15 0.4 V VCC = 2.7V, ISINK = 3.5mA 2
Output Voltage High VOH 4.45 4.85 V VCC = 5V, ISOURCE = 8mA 3
Output Voltage High VOH 2.3 2.55 V VCC = 2.7V, ISOURCE = 3.5mA 3
Output Rise/Fall Times tR/tF 40 ns CL = 15pF 3
Output Rise/Fall Times tR/tF 50 ns CL = 50pF 3
Output Rise/Fall Times tR/tF 80 ns CL = 200pF 3
Output Propagation Delay tPD+/tPD- 450 ns CL = 15pF, VCC = 2.7V, 50mV overdrive 3
Output Propagation Delay tPD+/tPD- 400 ns CL = 15pF, VCC = 2.7V, 100mV overdrive 3
Power-Up Time tPU 20 µs Time to VOUT valid logic state 3
Output Voltage VREF 2.04 2.048 2.056 V TA = +25°C, MAX9040-MAX9043 3
Output Voltage Temperature Coefficient TCVREF 6 50 ppm/°C SOT23 package 3
Line Regulation ΔVREF/ΔVCC 50 200 µV/V 2.5V ≤ VCC ≤ 5.5V, MAX9040-MAX9043 3
Load Regulation Sourcing ΔVREF/ΔIREF 2 4 µV/µA 0µA ≤ IREF ≤ 500µA 3
Load Regulation Sinking ΔVREF/ΔIREF 3.5 6 µV/µA -500µA ≤ IREF ≤ 0µA 3
Output Short-Circuit Current ISC 4 mA VREF = VEE or VCC 3
Thermal Hysteresis THYST 130 ppm 3
Long-Term Stability 50 ppm 1000h at TA = +25°C 3
Noise Voltage EOUT 40 µVP-P f = 0.1Hz to 10Hz 3
Noise Voltage EOUT 105 µVRMS f = 10Hz to 10kHz 3
Ripple Rejection ΔVREF/ΔVCC 84 dB VCC = 5V ±100mV, f = 120Hz 3
Turn-On Settling Time tR(VREF) 200 µs To VREF = 1% of final value 3
Capacitive-Load Stability Range CL(VREF) 0 4.7 nF 3
Operating Temperature Range TA -40 85 °C MAX9040 (MAX9039-43 range) 2
Supply Voltage (VCC to VEE) VCC -0.3 6 V 2
Current into Input Pins -20 20 mA 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature 300 °C Soldering, 10s 2
Derating 5-Pin SOT23 7.1 mW/°C Above +70°C 2

CAD (KiCad official)

  • Symbol: MAX9040AEUK+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: max9040aeuk-t-etched.step / max9040aeuk-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max9040aeuk-t.step / max9040aeuk-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (15 pp, sha256 2d01857c0c7aef4a, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF