component
MAX889TESA+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Charge Pumps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MAX889TESA+T
Analog Devices Inc Maxim Integrated · Charge Pumps · SOIC-8
MAX889TESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power-supply positive voltage input, specified for +2.7V to +5.5V with an undervoltage lockout threshold of 2.3V to 2.6V (absolute maximum +6V to GND). |
| 2 | CAP+ | passive | Positive terminal of the flying capacitor; its absolute maximum rating to GND is -0.3V to (VIN + 0.3V). |
| 3 | GND | power_in | Power ground, the reference for the IN, FB, SHDN and CAP+ ratings and the power-stage return. |
| 4 | CAP- | passive | Negative terminal of the flying capacitor; its rating to GND is (VOUT - 0.3V) to +0.3V. |
| 5 | OUT | power_out | Inverting charge-pump output, regulated from -2.5V to -VIN for loads up to 200mA (OUT to GND rated -6V to +0.3V). |
| 6 | SHDN | input | Shutdown control input (CMOS-compatible): drive low to shut down the device, connect to IN for normal operation; logic high is 0.7 x VIN minimum and logic low is 0.3 x VIN maximum. |
| 7 | FB | input | Feedback input: connect to a resistor divider from IN (or another positive reference) to OUT for regulated output, or to IN for free-run mode; the feedback loop servos FB to GND. |
| 8 | AGND | power_in | Analog ground, specified together with GND so that AGND to GND is limited to -0.3V to +0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VIN | 2.7 | 5.5 | V | RLOAD = 100Ω | 2 | |
| Output Voltage Range | VOUT | -2.5 | V | RLOAD = 100Ω | 2 | ||
| Quiescent Supply Current (Free-Run Mode) | IQ(FREE-RUN) | 24 | 48 | mA | No load, VFB = VIN | 2 | |
| Quiescent Supply Current (Regulated Mode) | IQ(REGULATED) | 11 | 22 | mA | No load, VOUT regulated to -3.3V | 2 | |
| Shutdown Supply Current | ISHDN | 0.1 | 50 | µA | VSHDN = 0 | 2 | |
| Open-Loop Output Resistance (Free-Run Mode) | RO | 2 | 4.5 | Ω | VFB = VIN | 2 | |
| SHDN, FB Input Bias Current | -1 | 1 | µA | 2 | |||
| FB Input Offset Voltage | -35 | 3 | 35 | mV | ILOAD = 0 | 2 | |
| IN Undervoltage Lockout Threshold | 2.3 | 2.6 | V | VIN rising (30mV hysteresis) | 2 | ||
| Switching Frequency (MAX889T) | fOSC | 1.5 | 2 | 2.5 | MHz | 2 | |
| IN to GND | -0.3 | 6 | V | 2 | |||
| FB, SHDN, CAP+ to GND | -0.3 | V | 2 | ||||
| OUT to GND | -6 | 0.3 | V | 2 | |||
| CAP- to GND | 0.3 | V | 2 | ||||
| AGND to GND | -0.3 | 0.3 | V | 2 | |||
| Continuous Output Current | 250 | mA | 2 | ||||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | soldering, 10s | 2 | |||
| Maximum Output Current (VIN = 5V, VOUT = -3.3V) | IOUT(MAX)1 | 200 | mA | VIN = 5V, VOUT = -3.3V | 2 | ||
| Maximum Output Current (VIN = 3.3V, VOUT = -2.5V) | IOUT(MAX)2 | 145 | mA | VIN = 3.3V, VOUT = -2.5V | 2 | ||
| Output Resistance (Regulated Mode) | RO(REG1) | 0.05 | Ω | VOUT regulated to -3.3V | 2 | ||
| Load Regulation | 10 | mV | IOUT = 0 to 200mA | 2 | |||
| Thermal Shutdown Threshold | 160 | °C | Junction temperature rising (15°C hysteresis) | 2 | |||
| Derating above +70°C (8-Pin SO) | 5.88 | mW/°C | above TA = +70°C | 2 |
CAD (KiCad official)
- Symbol:
MAX889TESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max889tesa-t-etched.step/max889tesa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max889tesa-t.step/max889tesa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (8 pp, sha256
2c15f38469a65d3e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX889TESA+T
**Analog Devices Inc Maxim Integrated** · Charge Pumps · SOIC-8
MAX889TESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power-supply positive voltage input, specified for +2.7V to +5.5V with an undervoltage lockout threshold of 2.3V to 2.6V (absolute maximum +6V to GND). |
| 2 | CAP+ | passive | Positive terminal of the flying capacitor; its absolute maximum rating to GND is -0.3V to (VIN + 0.3V). |
| 3 | GND | power_in | Power ground, the reference for the IN, FB, SHDN and CAP+ ratings and the power-stage return. |
| 4 | CAP- | passive | Negative terminal of the flying capacitor; its rating to GND is (VOUT - 0.3V) to +0.3V. |
| 5 | OUT | power_out | Inverting charge-pump output, regulated from -2.5V to -VIN for loads up to 200mA (OUT to GND rated -6V to +0.3V). |
| 6 | SHDN | input | Shutdown control input (CMOS-compatible): drive low to shut down the device, connect to IN for normal operation; logic high is 0.7 x VIN minimum and logic low is 0.3 x VIN maximum. |
| 7 | FB | input | Feedback input: connect to a resistor divider from IN (or another positive reference) to OUT for regulated output, or to IN for free-run mode; the feedback loop servos FB to GND. |
| 8 | AGND | power_in | Analog ground, specified together with GND so that AGND to GND is limited to -0.3V to +0.3V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VIN | 2.7 | | 5.5 | V | RLOAD = 100Ω | 2 |
| Output Voltage Range | VOUT | -2.5 | | | V | RLOAD = 100Ω | 2 |
| Quiescent Supply Current (Free-Run Mode) | IQ(FREE-RUN) | | 24 | 48 | mA | No load, VFB = VIN | 2 |
| Quiescent Supply Current (Regulated Mode) | IQ(REGULATED) | | 11 | 22 | mA | No load, VOUT regulated to -3.3V | 2 |
| Shutdown Supply Current | ISHDN | | 0.1 | 50 | µA | VSHDN = 0 | 2 |
| Open-Loop Output Resistance (Free-Run Mode) | RO | | 2 | 4.5 | Ω | VFB = VIN | 2 |
| SHDN, FB Input Bias Current | | -1 | | 1 | µA | | 2 |
| FB Input Offset Voltage | | -35 | 3 | 35 | mV | ILOAD = 0 | 2 |
| IN Undervoltage Lockout Threshold | | 2.3 | | 2.6 | V | VIN rising (30mV hysteresis) | 2 |
| Switching Frequency (MAX889T) | fOSC | 1.5 | 2 | 2.5 | MHz | | 2 |
| IN to GND | | -0.3 | | 6 | V | | 2 |
| FB, SHDN, CAP+ to GND | | -0.3 | | | V | | 2 |
| OUT to GND | | -6 | | 0.3 | V | | 2 |
| CAP- to GND | | | | 0.3 | V | | 2 |
| AGND to GND | | -0.3 | | 0.3 | V | | 2 |
| Continuous Output Current | | | | 250 | mA | | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (soldering, 10s) | | | | 300 | °C | soldering, 10s | 2 |
| Maximum Output Current (VIN = 5V, VOUT = -3.3V) | IOUT(MAX)1 | | 200 | | mA | VIN = 5V, VOUT = -3.3V | 2 |
| Maximum Output Current (VIN = 3.3V, VOUT = -2.5V) | IOUT(MAX)2 | | 145 | | mA | VIN = 3.3V, VOUT = -2.5V | 2 |
| Output Resistance (Regulated Mode) | RO(REG1) | | 0.05 | | Ω | VOUT regulated to -3.3V | 2 |
| Load Regulation | | | 10 | | mV | IOUT = 0 to 200mA | 2 |
| Thermal Shutdown Threshold | | | 160 | | °C | Junction temperature rising (15°C hysteresis) | 2 |
| Derating above +70°C (8-Pin SO) | | | 5.88 | | mW/°C | above TA = +70°C | 2 |
## CAD (KiCad official)
- Symbol: `MAX889TESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `max889tesa-t-etched.step` / `max889tesa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max889tesa-t.step` / `max889tesa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906833834881024) (8 pp, sha256 `2c15f38469a65d3e`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max889tesa-t-datasheet.pdf)