main
Ray max813lcsa: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 502fa90
{
  "slug": "max813lcsa",
  "version": "0.1.0",
  "type": "component",
  "description": "MSKSEMI Supervisor and Reset ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "max813lcsa"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max813lcsa.kicad_sym",
    "max813lcsa.kicad_mod",
    "max813lcsa.glb",
    "max813lcsa.step",
    "max813lcsa.lbr",
    "docs/hero.png",
    "docs/max813lcsa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max813lcsa-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "MAX813LCSA",
    "manufacturer": "MSKSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Supervisor and Reset ICs",
    "parts": {
      "symbol": "max813lcsa.kicad_sym",
      "footprint": "max813lcsa.kicad_mod",
      "model_3d": "max813lcsa-etched.glb",
      "model_3d_plain": "max813lcsa.glb",
      "model_3d_step": "max813lcsa-etched.step",
      "model_3d_step_plain": "max813lcsa.step",
      "lbr": "max813lcsa.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "!MR",
        "type": "input",
        "description": "Active-low manual reset input. Internally pulled up to VCC through a 10-40 kΩ resistor (typ. 20 kΩ). Driving this pin low forces RESET active; input thresholds are 0.7·VCC / 0.6 V (VCC<4.5 V) or 2.0 V / 0.8 V (VCC≥4.5 V). Minimum low pulse width 150 ns (VCC>4.5 V) or 500 ns at lower supplies."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input. Operating range 5.0 V-5.5 V for the 813L reset threshold (VRT = 4.65 V typ.); device functions down to 1.1 V for reset output validity. Supply current ICC ≈ 75 µA typical, 140 µA maximum."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference (0 V). Return for VCC and reference for all input/output thresholds."
      },
      {
        "number": "4",
        "name": "PFI",
        "type": "input",
        "description": "Power-fail comparator input, non-inverting side against an internal 1.25 V reference (threshold 1.20-1.30 V, typ. 1.25 V, on falling edge). Very high impedance input (±25 nA leakage). Tie to GND or VCC if unused; drive from an external resistor divider to monitor an arbitrary rail."
      },
      {
        "number": "5",
        "name": "!PFO",
        "type": "output",
        "description": "Active-low power-fail comparator output. Goes low when PFI drops below the 1.25 V reference. Push-pull drive: VOH ≥ VCC−1.5 V at 800 µA source (VCC≥4.5 V), VOL ≤ 0.4 V at 3.2 mA sink."
      },
      {
        "number": "6",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input. Must be toggled (high or low transition) at least every tWD ≈ 1.6 s typical (1.0-2.25 s) or !WDO will assert. Minimum pulse width tWP = 50 ns (VCC>4.5 V) or 100 ns at lower supplies. Leave floating (three-state / high-Z) to disable the watchdog timer."
      },
      {
        "number": "7",
        "name": "RESET",
        "type": "output",
        "description": "Active-high reset output. Asserts high whenever VCC falls below VRT (typ. 4.65 V) and remains high for tRS ≈ 200 ms after VCC recovers or after a manual reset. Push-pull drive: VOH ≥ VCC−1.5 V at 800 µA source (VCC≥4.5 V), VOL ≤ 0.4 V at 3.2 mA sink; guaranteed VOH ≥ 0.9 V even at VCC=1.2 V (ISOURCE=4 µA)."
      },
      {
        "number": "8",
        "name": "!WDO",
        "type": "output",
        "description": "Active-low watchdog timeout output. Pulls low if WDI is not toggled within tWD (~1.6 s). Push-pull drive: VOH ≥ VCC−1.5 V at 800 µA source (VCC≥4.5 V), VOL ≤ 0.4 V at 1.2 mA sink."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C6454440",
      "digikey": "MAX813LCSA-ND",
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:07:23Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "MAX813LCSA-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "max813lcsa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max813lcsa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f138d9037ea2417803c536a1900782fb4e69d153b70bf0e5d7d65c97f6695074",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}