MAX810TDBZRG

{
  "slug": "max810tdbzrg",
  "version": "0.1.0",
  "type": "component",
  "description": "HANSCHIP semiconductor Supervisor And Reset ICs, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "max810tdbzrg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max810tdbzrg.kicad_sym",
    "max810tdbzrg.kicad_mod",
    "max810tdbzrg.glb",
    "max810tdbzrg.step",
    "max810tdbzrg.lbr",
    "docs/hero.png",
    "docs/max810tdbzrg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max810tdbzrg-hero.glb",
    "max810tdbzrg-hero.overlay.json",
    "max810tdbzrg-etched.glb"
  ],
  "component": {
    "mpn": "MAX810TDBZRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "SOT-23-3",
    "pin_count": 3,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8597543948109950976",
    "parts": {
      "symbol": "max810tdbzrg.kicad_sym",
      "footprint": "max810tdbzrg.kicad_mod",
      "model_3d": "max810tdbzrg-hero.glb",
      "model_3d_plain": "max810tdbzrg-etched.glb",
      "model_3d_step": "max810tdbzrg-etched.step",
      "model_3d_step_plain": "max810tdbzrg.step",
      "lbr": "max810tdbzrg.lbr"
    },
    "distributor_links": {
      "lcsc": "C19723720"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T21:04:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground terminal."
      },
      {
        "number": "2",
        "name": "RESET",
        "type": "output",
        "description": "Reset output that goes high when VCC is below the detection voltage Vth and low when VCC is above it, with VOL at most 0.3 V at ISINK = 1.2 mA and VOH at least 0.8VCC at ISOURCE = 150 uA."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Chip supply input, specified from 1.0 V to 6.0 V with an absolute maximum of 6.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives the SOT-23 pinout only as a text table (pin 1 GND, pin 3 VCC, pin 2 RESET) with ; The datasheet does not state whether RESET is push-pull or open-drain. It is classed as 'output' her"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0261,
        "at": "2026-10-17T21:02:29"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8597543948109950976",
        "pages": 6,
        "sha256": "13741abb85210c7c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max810tdbzrg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3.0,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "16964b14f93e6c778288a0c110b35f670fab733109c26f0da7dfc07cc3350040",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max810tdbzrg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3.0,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "61be57719d7227d133332712ef98f13037f3c37d1188bed06adae514189b0f32",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}