MAX809SDBZRG

{
  "schema_version": 1,
  "type": "component",
  "slug": "max809sdbzrg",
  "title": "MAX809SDBZRG",
  "brief": "HANSCHIP semiconductor Supervisor And Reset ICs, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "max809sdbzrg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MAX809SDBZRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "SOT-23-3",
    "pin_count": 3,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758024728294903808",
    "parts": {
      "symbol": "max809sdbzrg.kicad_sym",
      "footprint": "max809sdbzrg.kicad_mod",
      "model_3d": "max809sdbzrg-hero.glb",
      "model_3d_plain": "max809sdbzrg-etched.glb",
      "model_3d_step": "max809sdbzrg-etched.step",
      "model_3d_step_plain": "max809sdbzrg.step",
      "lbr": "max809sdbzrg.lbr"
    },
    "distributor_links": {
      "lcsc": "C19723725"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T11:25:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground terminal (芯片接地端); the datasheet gives no additional electrical limits for this pin."
      },
      {
        "number": "2",
        "name": "RESET",
        "type": "output",
        "description": "Reset output (复位输出端) that drives low (VOL max 0.3 V at ISINK = 1.2 mA with VCC = Vthmin) and high (VOH min 0.8VCC at ISOURCE = 500 uA with VCC > Vthmax), with VRESET limited to -0.3 V to VCC+0.3 V."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply input (芯片输入端) with an operating range of 1.0 V to 6.0 V and an absolute maximum of 6.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin 2 name is garbled in the extracted text (glyph placeholders). The name RESET is taken from t; The package is SOT-23 only, and the three pin numbers and functions come from the page 2 pin definit"
        ],
        "pages_sent": 6,
        "cost_usd": 0.028,
        "at": "2026-10-18T11:24:11"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758024728294903808",
        "pages": 6,
        "sha256": "05a8818858c0aa10",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max809sdbzrg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "16964b14f93e6c778288a0c110b35f670fab733109c26f0da7dfc07cc3350040",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max809sdbzrg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "12e6114c885d6c3a8b4271a5b5c76f5c6ceb4fdacdbc2665833051acbc89f385",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "HANSCHIP semiconductor",
      "Package": "SOT-23-3",
      "Category": "Power Management (PMIC)",
      "Pins": "3"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "05a8818858c0aa1080b49359e3e3788b63de20a681ef9d89e72c4131fcb7b255",
      "rows": [
        {
          "name": "工作电压 (operating voltage)",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "工作温度范围 (operating temperature range)",
          "symbol": "Tw",
          "kind": "recommended_operating",
          "unit": "℃",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "复位电压 (reset threshold voltage, Vth(1))",
          "symbol": "Vth(1)",
          "kind": "electrical",
          "unit": "V",
          "min": 0.975,
          "typ": null,
          "max": 1.025,
          "conditions": "VCC=Vth+0.5V to Vth, no load, VRESET=VCC to GND; printed as 0.975*Vth(E) to 1.025*Vth(E), Vth(E) nominal",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "上电复位时间 (power-on reset time, R/S/T group)",
          "symbol": "Trp",
          "kind": "timing",
          "unit": "ms",
          "min": 80,
          "typ": null,
          "max": 350,
          "conditions": "VCC=0 to 3.5V, no load",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "复位输出低电压 (reset output low voltage)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.3,
          "conditions": "VCC=Vthmin, ISINK=1.2mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "复位输出高电压 (reset output high voltage)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 0.8,
          "typ": null,
          "max": null,
          "conditions": "VCC>Vthmax, ISOURCE=500uA; printed as 0.8VCC (minimum, no maximum printed)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "温度系数 (threshold temperature coefficient)",
          "symbol": "ΔVth/(Vth*ΔTa)",
          "kind": "temperature_coefficient",
          "unit": "ppm/℃",
          "min": -150,
          "typ": null,
          "max": 150,
          "conditions": "-40℃≤Ta≤85℃; printed as ±150",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "输入电压 (input voltage, absolute maximum)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 6.5,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "复位输出电压 (reset output voltage, absolute maximum)",
          "symbol": "VRESET",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "upper limit printed as VCC+0.3",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "功耗 (power dissipation, SOT-23)",
          "symbol": "PD",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 200,
          "conditions": "SOT-23",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "存储温度范围 (storage temperature range)",
          "symbol": "Tc",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": -55,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "焊接温度 (soldering temperature)",
          "symbol": "Th",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": null,
          "typ": null,
          "max": 245,
          "conditions": "10s",
          "source_page": 3,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "max809sdbzrg"
  ],
  "discovery_pitch": "MAX809SDBZRG (HANSCHIP semiconductor) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max809sdbzrg.kicad_sym",
    "max809sdbzrg.kicad_mod",
    "max809sdbzrg.glb",
    "max809sdbzrg.step",
    "max809sdbzrg.lbr",
    "docs/hero.png",
    "docs/max809sdbzrg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max809sdbzrg-hero.glb",
    "max809sdbzrg-hero.overlay.json",
    "max809sdbzrg-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}