main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs max7221cwg-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers max7221cwg-t: viewers · Ray
max7221cwg-t-etched.fit.json max7221cwg-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max7221cwg-t-etched.glb max7221cwg-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max7221cwg-t-etched.step max7221cwg-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max7221cwg-t.glb Publish 0.1.0 · Ray
max7221cwg-t.kicad_mod Publish 0.1.0 · Ray
max7221cwg-t.kicad_sym Publish 0.1.0 · Ray
max7221cwg-t.lbr Publish 0.1.0 · Ray
max7221cwg-t.step Publish 0.1.0 · Ray
package.json max7221cwg-t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json brief: say who settled the pinout (an AI reviewer or models), not a person · Ray
README.md Initial commit: component/max7221cwg-t · Ray

MAX7221CWG+T

Analog Devices Inc Maxim Integrated · Digital Tube Drivers · SOIC-24-300mil

MAX7221CWG+T from Analog Devices Inc Maxim Integrated, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIN input Serial-Data Input; data loaded into 16-bit shift register on CLK rising edge with 25ns setup time.
2 DIG 0 output Digit 0 drive line sinking 320mA max current from common cathode; high-impedance when off.
3 DIG 1 output Digit 1 drive line sinking 320mA max current from common cathode; high-impedance when off.
4 GND power_in Ground connection; both GND pins (4 and 9) must be connected to system ground.
5 DIG 2 output Digit 2 drive line sinking 320mA max current from common cathode; high-impedance when off.
6 DIG 3 output Digit 3 drive line sinking 320mA max current from common cathode; high-impedance when off.
7 DIG 4 output Digit 4 drive line sinking 320mA max current from common cathode; high-impedance when off.
8 DIG 5 output Digit 5 drive line sinking 320mA max current from common cathode; high-impedance when off.
9 GND power_in Ground connection; both GND pins (4 and 9) must be connected to system ground.
10 DIG 6 output Digit 6 drive line sinking 320mA max current from common cathode; high-impedance when off.
11 DIG 7 output Digit 7 drive line sinking 320mA max current from common cathode; high-impedance when off.
12 CS input Chip-Select Input (MAX7221 only); serial data loads into shift register while CS low, latches on CS rising edge.
13 CLK input Serial-Clock Input; 10MHz max rate; data shifts in on rising edge, out on falling edge; active only while CS low.
14 SEG A output Segment A drive line sourcing 40mA max current to seven-segment display; high-impedance when off.
15 SEG B output Segment B drive line sourcing 40mA max current to seven-segment display; high-impedance when off.
16 SEG C output Segment C drive line sourcing 40mA max current to seven-segment display; high-impedance when off.
17 SEG D output Segment D drive line sourcing 40mA max current to seven-segment display; high-impedance when off.
18 ISET passive Segment current reference; connect to V+ through RSET resistor (min 9.53kΩ) to set peak segment current at approximately 100× ISET.
19 V+ power_in Positive supply voltage; 4.0V to 5.5V operating range with 5V nominal; max 500µA logic and scan current.
20 SEG E output Segment E drive line sourcing 40mA max current to seven-segment display; high-impedance when off.
21 SEG F output Segment F drive line sourcing 40mA max current to seven-segment display; high-impedance when off.
22 SEG G output Segment G drive line sourcing 40mA max current to seven-segment display; high-impedance when off.
23 SEG DP output Decimal Point drive line sourcing 40mA max current to display; high-impedance when off.
24 DOUT output Serial-Data Output; data from DIN valid after 16.5 clock cycles with 25ns propagation delay; used for daisy-chaining.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOIC-24-300mil
Category LED Drivers
Pins 24

CAD (KiCad official)

  • Symbol: MAX7221CWG+T
  • Footprint: Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm
  • 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
  • 3D model files: max7221cwg-t-etched.step / max7221cwg-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max7221cwg-t.step / max7221cwg-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (17 pp, sha256 f312632f10a27121, retrieved 2026-09-29, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF