main
Ray max7219cwg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 33fcbd8
{
  "schema_version": 1,
  "type": "component",
  "slug": "max7219cwg",
  "title": "MAX7219CWG+",
  "brief": "Analog Devices Inc Maxim Integrated Digital Tube Drivers, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "max7219cwg+",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MAX7219CWG+",
    "manufacturer": "Analog Devices Inc Maxim Integrated",
    "package": "SOIC-24-300mil",
    "pin_count": 24,
    "category": "LED Drivers",
    "subcategory": "Digital Tube Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589032989183787008",
    "parts": {
      "symbol": "max7219cwg.kicad_sym",
      "footprint": "max7219cwg.kicad_mod",
      "model_3d": "max7219cwg-etched.glb",
      "model_3d_plain": "max7219cwg.glb",
      "model_3d_step": "max7219cwg-etched.step",
      "model_3d_step_plain": "max7219cwg.step",
      "lbr": "max7219cwg.lbr"
    },
    "distributor_links": {
      "lcsc": "C1524040"
    },
    "pins": [
      {
        "number": "1",
        "name": "DIN",
        "type": "input",
        "description": "Serial-Data Input; data loaded into the internal 16-bit shift register on CLK's rising edge."
      },
      {
        "number": "2",
        "name": "DIG 0",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "3",
        "name": "DIG 1",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; both GND pins (4 and 9) must be connected."
      },
      {
        "number": "5",
        "name": "DIG 2",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "6",
        "name": "DIG 3",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "7",
        "name": "DIG 4",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "8",
        "name": "DIG 5",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; both GND pins (4 and 9) must be connected."
      },
      {
        "number": "10",
        "name": "DIG 6",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "11",
        "name": "DIG 7",
        "type": "output",
        "description": "Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off."
      },
      {
        "number": "12",
        "name": "LOAD",
        "type": "input",
        "description": "Load-Data Input; the last 16 bits of serial data are latched on LOAD's rising edge."
      },
      {
        "number": "13",
        "name": "CLK",
        "type": "input",
        "description": "Serial-Clock Input, 10MHz maximum rate; data shifted into shift register on rising edge, clocked out DOUT on falling edge."
      },
      {
        "number": "14",
        "name": "SEG A",
        "type": "output",
        "description": "Segment A drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "15",
        "name": "SEG F",
        "type": "output",
        "description": "Segment F drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "16",
        "name": "SEG B",
        "type": "output",
        "description": "Segment B drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "17",
        "name": "SEG G",
        "type": "output",
        "description": "Segment G drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "18",
        "name": "ISET",
        "type": "passive",
        "description": "Connect to V+ through resistor RSET to set the peak segment current (minimum RSET value 9.53kΩ, current nominally 100× ISET)."
      },
      {
        "number": "19",
        "name": "V+",
        "type": "power_in",
        "description": "Positive Supply Voltage; connect to +5V, operating range 4.0 to 5.5V."
      },
      {
        "number": "20",
        "name": "SEG E",
        "type": "output",
        "description": "Segment E drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "21",
        "name": "SEG C",
        "type": "output",
        "description": "Segment C drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "22",
        "name": "SEG DP",
        "type": "output",
        "description": "Decimal Point drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "23",
        "name": "SEG D",
        "type": "output",
        "description": "Segment D drive that sources current to the display; when segment driver is turned off, pulled to GND."
      },
      {
        "number": "24",
        "name": "DOUT",
        "type": "output",
        "description": "Serial-Data Output; data from DIN is valid at DOUT 16.5 clock cycles later, used to daisy-chain devices, never high-impedance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Exact pin-to-segment mapping (SEG A-G and DP to pins 14-17 and 20-23) determined from Page 1 pin con",
          "1/24 pins cited to the wrong page (name found elsewhere): ['22:SEG DP@p5']"
        ],
        "pages_sent": 15,
        "cost_usd": 0.7109,
        "at": "2026-09-21T21:50:27"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589032989183787008",
        "pages": 15,
        "sha256": "7585bd4469c4355e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max7219cwg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          15.4,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4b0d20f82f5b0124fecfe11c941274a3c865a30f7baee8b8fadd7df55972d4cd",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max7219cwg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          15.4,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "efbbef412a9b13a6019ccdc3aa23fcb87d1494061e72cfd5635e25c84c6665fc",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Analog Devices Inc Maxim Integrated",
      "Package": "SOIC-24-300mil",
      "Category": "LED Drivers",
      "Pins": "24"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "max7219cwg+"
  ],
  "discovery_pitch": "MAX7219CWG+ (Analog Devices Inc Maxim Integrated) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max7219cwg.kicad_sym",
    "max7219cwg.kicad_mod",
    "max7219cwg.glb",
    "max7219cwg.step",
    "max7219cwg.lbr",
    "docs/hero.png",
    "docs/max7219cwg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T18:34:48.907Z"
}