component
MAX7219CWG+
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Digital Tube Drivers, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/max7219cwg
31d0c32
MAX7219CWG+
Analog Devices Inc Maxim Integrated · Digital Tube Drivers · SOIC-24-300mil
MAX7219CWG+ from Analog Devices Inc Maxim Integrated, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN | input | Serial-Data Input; data loaded into the internal 16-bit shift register on CLK's rising edge. |
| 2 | DIG 0 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 3 | DIG 1 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 4 | GND | power_in | Ground; both GND pins (4 and 9) must be connected. |
| 5 | DIG 2 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 6 | DIG 3 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 7 | DIG 4 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 8 | DIG 5 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 9 | GND | power_in | Ground; both GND pins (4 and 9) must be connected. |
| 10 | DIG 6 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 11 | DIG 7 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 12 | LOAD | input | Load-Data Input; the last 16 bits of serial data are latched on LOAD's rising edge. |
| 13 | CLK | input | Serial-Clock Input, 10MHz maximum rate; data shifted into shift register on rising edge, clocked out DOUT on falling edge. |
| 14 | SEG A | output | Segment A drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 15 | SEG F | output | Segment F drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 16 | SEG B | output | Segment B drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 17 | SEG G | output | Segment G drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 18 | ISET | passive | Connect to V+ through resistor RSET to set the peak segment current (minimum RSET value 9.53kΩ, current nominally 100× ISET). |
| 19 | V+ | power_in | Positive Supply Voltage; connect to +5V, operating range 4.0 to 5.5V. |
| 20 | SEG E | output | Segment E drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 21 | SEG C | output | Segment C drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 22 | SEG DP | output | Decimal Point drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 23 | SEG D | output | Segment D drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 24 | DOUT | output | Serial-Data Output; data from DIN is valid at DOUT 16.5 clock cycles later, used to daisy-chain devices, never high-impedance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-24-300mil |
| Category | LED Drivers |
| Pins | 24 |
CAD (KiCad official)
- Symbol:
MAX7219CWG+ - Footprint:
Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm - 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files:
max7219cwg-etched.step/max7219cwg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max7219cwg.step/max7219cwg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (15 pp, sha256
7585bd4469c4355e, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX7219CWG+
**Analog Devices Inc Maxim Integrated** · Digital Tube Drivers · SOIC-24-300mil
MAX7219CWG+ from Analog Devices Inc Maxim Integrated, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN | input | Serial-Data Input; data loaded into the internal 16-bit shift register on CLK's rising edge. |
| 2 | DIG 0 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 3 | DIG 1 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 4 | GND | power_in | Ground; both GND pins (4 and 9) must be connected. |
| 5 | DIG 2 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 6 | DIG 3 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 7 | DIG 4 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 8 | DIG 5 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 9 | GND | power_in | Ground; both GND pins (4 and 9) must be connected. |
| 10 | DIG 6 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 11 | DIG 7 | output | Eight-digit drive line that sinks current from the display common cathode; MAX7219 pulls output to V+ when turned off. |
| 12 | LOAD | input | Load-Data Input; the last 16 bits of serial data are latched on LOAD's rising edge. |
| 13 | CLK | input | Serial-Clock Input, 10MHz maximum rate; data shifted into shift register on rising edge, clocked out DOUT on falling edge. |
| 14 | SEG A | output | Segment A drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 15 | SEG F | output | Segment F drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 16 | SEG B | output | Segment B drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 17 | SEG G | output | Segment G drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 18 | ISET | passive | Connect to V+ through resistor RSET to set the peak segment current (minimum RSET value 9.53kΩ, current nominally 100× ISET). |
| 19 | V+ | power_in | Positive Supply Voltage; connect to +5V, operating range 4.0 to 5.5V. |
| 20 | SEG E | output | Segment E drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 21 | SEG C | output | Segment C drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 22 | SEG DP | output | Decimal Point drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 23 | SEG D | output | Segment D drive that sources current to the display; when segment driver is turned off, pulled to GND. |
| 24 | DOUT | output | Serial-Data Output; data from DIN is valid at DOUT 16.5 clock cycles later, used to daisy-chain devices, never high-impedance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-24-300mil |
| Category | LED Drivers |
| Pins | 24 |
## CAD (KiCad official)
- Symbol: `MAX7219CWG+`
- Footprint: `Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm`
- 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files: `max7219cwg-etched.step` / `max7219cwg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max7219cwg.step` / `max7219cwg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589032989183787008) (15 pp, sha256 `7585bd4469c4355e`, retrieved 2026-09-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max7219cwg-datasheet.pdf)