Generated by kicad-footprint-generator · KiCad file format 20260206
MAX708SESA-HXY
HXY MOSFET · Monitors & Reset Circuits · SOP-8
MAX708SESA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | !MR | input | Manual reset input, with an internal pull-up resistor of 10k to 40k ohm (typ 20k). |
| 2 | VCC | power_in | Power supply input, 3.3V to 5.5V for the 708S type, which asserts reset when VCC falls below 2.93V. |
| 3 | GND | power_in | Ground. |
| 4 | PFI | input | Inverting input of the internal 1.25V comparator (threshold 1.25V typ), to be tied to GND or VCC when unused. |
| 5 | !PFO | output | Output of the internal 1.25V comparator. |
| 6 | NC | unconnected | No internal connection. |
| 7 | !RESET | output | Active-low reset signal output. |
| 8 | RESET | output | Active-high reset signal output, the inverse of !RESET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC operating voltage range (708xE grade) | VCC | 1.2 | 5.5 | V | 705/6/7/8xE | 5 | |
| Supply current, VCC < 3.6V (708xE) | ICC | 50 | 140 | µA | VCC < 3.6V, MR = VCC, WDI open | 5 | |
| Supply current, VCC < 5.5V (707E/708E) | ICC | 50 | 140 | µA | VCC < 5.5V | 5 | |
| Reset threshold voltage (S type) | VRT | 2.85 | 2.93 | 3 | V | S type device | 5 |
| Reset threshold hysteresis | 40 | mV | 5 | ||||
| MR pulse width | tMR | 150 | ns | 4.5V < VCC < 5.5V | 5 | ||
| MR pulse width (P/R/S/T) | tMR | 500 | ns | P/R/S/T type, VRST(MAX) < VCC < 3.6V | 5 | ||
| MR to RESET output delay | tMD | 250 | ns | 4.5V < VCC < 5.5V | 6 | ||
| MR input threshold voltage high | VIH | 2 | V | 4.5V < VCC < 5.5V | 6 | ||
| MR input threshold voltage low | VIL | 0.6 | V | VRST (MAX) < VCC < 4.5V | 6 | ||
| MR input threshold voltage low | VIL | 0.8 | V | 4.5V < VCC < 5.5V | 6 | ||
| MR pull-up resistance | RP | 10 | 20 | 40 | kΩ | 6 | |
| RESET output low voltage (708R/S/T/J) | VOL | 0.4 | V | ISINK = 3.2mA, 4.5V < VCC < 5.5V | 7 | ||
| RESET output low voltage (708R/S/T/J) | VOL | 0.3 | V | ISINK = 1.2mA, VRST (MAX) < VCC < 4.5V | 7 | ||
| RESET output low voltage (707/708) | VOL | 0.4 | V | 707/708, ISINK = 1.2mA | 7 | ||
| RESET output low voltage (706E, 708E) | VOL | 0.3 | V | 706E, 708E, 705/6/7/8; ISINK = 100µA, VCC = 1.2V | 7 | ||
| PFI input threshold voltage (S/T type) | PFI | 1.2 | 1.25 | 1.3 | V | PFI falling; S/T type, VCC = 3.3V | 8 |
| PFI input current | IPFI | -25 | 0.01 | 25 | nA | 8 | |
| PFO output low voltage | VOL | 0.4 | V | ISINK = 3.2mA, 4.5V < VCC < 5.5V | 8 | ||
| PFO output low voltage | VOL | 0.3 | V | ISINK = 1.2mA, VRS (MAX) < VCC < 4.5V | 8 | ||
| Operating temperature range (E grade, 708SESA) | -40 | 85 | °C | Ordering table entry for 708SESA (E grade) | 17 |
CAD (KiCad official)
- Symbol:
MAX708SESA-HXY - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max708sesa-hxy-etched.step/max708sesa-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max708sesa-hxy.step/max708sesa-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (20 pp, sha256
519b55ef659b3c93, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).