component
MAX708ESA+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Supervisor And Reset ICs, SOIC-8-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MAX708ESA+T
Analog Devices Inc Maxim Integrated · Supervisor And Reset ICs · SOIC-8-150mil
MAX708ESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Manual-reset input triggers a reset pulse when pulled below 0.8V; it has an internal 250µA pull-up, is TTL/CMOS compatible, and is debounced by the 140ms minimum reset pulse width. |
| 2 | VCC | power_in | +5V supply input; the MAX708 operates from 4.5V to 5.5V and its reset threshold is 4.40V typical (4.25V to 4.50V). |
| 3 | GND | power_in | 0V ground reference for all signals. |
| 4 | PFI | input | Power-fail voltage monitor input; PFO goes low when PFI is below the 1.25V threshold, and it should be connected to GND or VCC when not used. |
| 5 | PFO | output | Power-fail output goes low and sinks current when PFI is less than 1.25V, otherwise it stays high. |
| 6 | N.C. | unconnected | No connection. |
| 7 | RESET | output | Active-high reset output is the inverse of RESET (active-low) and is guaranteed valid with VCC down to 1.1V. |
| 8 | RESET | output | Active-low reset output pulses low for 200ms when triggered, stays low while VCC is below the reset threshold, and remains low for 200ms after VCC rises above the threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8-150mil |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (MAX70_E/M) | VCC | 1.2 | 5.5 | V | MAX70_E/M, MAX813LE/M | 2 | |
| Reset Threshold (MAX706, MAX708) | VRT | 4.25 | 4.4 | 4.5 | V | 2 | |
| Reset Pulse Width | tRS | 140 | 200 | 280 | ms | 2 | |
| RESET Output Voltage (active-low), VOL | VOL | 0.4 | V | ISINK = 3.2mA | 2 | ||
| RESET Output Voltage (active-low), VOL | VOL | 0.3 | V | MAX70_E/M, VCC = 1.2V, ISINK = 100µA | 2 | ||
| RESET Output Voltage (active-high, MAX708), VOL | VOL | 0.4 | V | MAX707, MAX708, ISINK = 1.2mA | 2 | ||
| Supply Current | ISUPPLY | 50 | 500 | µA | MAX707E/M, MAX708E/M | 2 | |
| MR Pull-Up Current | 100 | 250 | 600 | µA | MR = 0V | 3 | |
| MR Pulse Width | tMR | 150 | ns | 3 | |||
| MR to Reset Out Delay | tMD | 250 | ns | 3 | |||
| MR Input Threshold, Low | 0.8 | V | 3 | ||||
| MR Input Threshold, High | 2 | V | 3 | ||||
| PFI Input Threshold | 1.2 | 1.25 | 1.3 | V | VCC = 5V | 3 | |
| PFI Input Current | -25 | 0.01 | 25 | nA | 3 | ||
| PFO Output Voltage (VOL) | 0.4 | V | ISINK = 3.2mA | 3 | |||
| Terminal Voltage (with respect to GND) VCC | -0.3 | 6 | V | 2 | |||
| Terminal Voltage, All Other Inputs (lower limit) | -0.3 | V | Note 1; upper limit printed as VCC + 0.3V | 2 | |||
| Input Current VCC | 20 | mA | 2 | ||||
| Input Current GND | 20 | mA | 2 | ||||
| Output Current (all outputs) | 20 | mA | 2 | ||||
| Continuous Power Dissipation (SO) | 471 | mW | SO, derate 5.88mW/°C above +70°C | 2 | |||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | soldering, 10 sec | 2 | |||
| Operating Temperature Range (E grade) | -40 | 85 | °C | MAX70_E__ | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | MAX813LCPA 0°C to +70°C 8 Plastic DIP | 9 |
CAD (KiCad official)
- Symbol:
MAX708ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
- 3D model files:
max708esa-t-etched.step/max708esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max708esa-t.step/max708esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (12 pp, sha256
6edbfc390d9a122f, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX708ESA+T
**Analog Devices Inc Maxim Integrated** · Supervisor And Reset ICs · SOIC-8-150mil
MAX708ESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Manual-reset input triggers a reset pulse when pulled below 0.8V; it has an internal 250µA pull-up, is TTL/CMOS compatible, and is debounced by the 140ms minimum reset pulse width. |
| 2 | VCC | power_in | +5V supply input; the MAX708 operates from 4.5V to 5.5V and its reset threshold is 4.40V typical (4.25V to 4.50V). |
| 3 | GND | power_in | 0V ground reference for all signals. |
| 4 | PFI | input | Power-fail voltage monitor input; PFO goes low when PFI is below the 1.25V threshold, and it should be connected to GND or VCC when not used. |
| 5 | PFO | output | Power-fail output goes low and sinks current when PFI is less than 1.25V, otherwise it stays high. |
| 6 | N.C. | unconnected | No connection. |
| 7 | RESET | output | Active-high reset output is the inverse of RESET (active-low) and is guaranteed valid with VCC down to 1.1V. |
| 8 | RESET | output | Active-low reset output pulses low for 200ms when triggered, stays low while VCC is below the reset threshold, and remains low for 200ms after VCC rises above the threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8-150mil |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (MAX70_E/M) | VCC | 1.2 | | 5.5 | V | MAX70_E/M, MAX813LE/M | 2 |
| Reset Threshold (MAX706, MAX708) | VRT | 4.25 | 4.4 | 4.5 | V | | 2 |
| Reset Pulse Width | tRS | 140 | 200 | 280 | ms | | 2 |
| RESET Output Voltage (active-low), VOL | VOL | | | 0.4 | V | ISINK = 3.2mA | 2 |
| RESET Output Voltage (active-low), VOL | VOL | | | 0.3 | V | MAX70_E/M, VCC = 1.2V, ISINK = 100µA | 2 |
| RESET Output Voltage (active-high, MAX708), VOL | VOL | | | 0.4 | V | MAX707, MAX708, ISINK = 1.2mA | 2 |
| Supply Current | ISUPPLY | | 50 | 500 | µA | MAX707E/M, MAX708E/M | 2 |
| MR Pull-Up Current | | 100 | 250 | 600 | µA | MR = 0V | 3 |
| MR Pulse Width | tMR | 150 | | | ns | | 3 |
| MR to Reset Out Delay | tMD | | | 250 | ns | | 3 |
| MR Input Threshold, Low | | | | 0.8 | V | | 3 |
| MR Input Threshold, High | | 2 | | | V | | 3 |
| PFI Input Threshold | | 1.2 | 1.25 | 1.3 | V | VCC = 5V | 3 |
| PFI Input Current | | -25 | 0.01 | 25 | nA | | 3 |
| PFO Output Voltage (VOL) | | | | 0.4 | V | ISINK = 3.2mA | 3 |
| Terminal Voltage (with respect to GND) VCC | | -0.3 | | 6 | V | | 2 |
| Terminal Voltage, All Other Inputs (lower limit) | | -0.3 | | | V | Note 1; upper limit printed as VCC + 0.3V | 2 |
| Input Current VCC | | | | 20 | mA | | 2 |
| Input Current GND | | | | 20 | mA | | 2 |
| Output Current (all outputs) | | | | 20 | mA | | 2 |
| Continuous Power Dissipation (SO) | | | | 471 | mW | SO, derate 5.88mW/°C above +70°C | 2 |
| Storage Temperature Range | | -65 | | 160 | °C | | 2 |
| Lead Temperature (soldering) | | | | 300 | °C | soldering, 10 sec | 2 |
| Operating Temperature Range (E grade) | | -40 | | 85 | °C | MAX70_E__ | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | | MAX813LCPA 0°C to +70°C 8 Plastic DIP | 9 |
## CAD (KiCad official)
- Symbol: `MAX708ESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
- 3D model files: `max708esa-t-etched.step` / `max708esa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max708esa-t.step` / `max708esa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183001994899456) (12 pp, sha256 `6edbfc390d9a122f`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max708esa-t-datasheet.pdf)