MAX706TESA

{
  "slug": "max706tesa",
  "version": "0.1.0",
  "type": "component",
  "description": "lingxingic Supervisor And Reset ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "max706tesa",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max706tesa.kicad_sym",
    "max706tesa.kicad_mod",
    "max706tesa.glb",
    "max706tesa.step",
    "max706tesa.lbr",
    "docs/hero.png",
    "docs/max706tesa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max706tesa-hero.glb",
    "max706tesa-hero.overlay.json",
    "max706tesa-etched.glb"
  ],
  "component": {
    "mpn": "MAX706TESA",
    "manufacturer": "lingxingic",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603388806553366528",
    "parts": {
      "symbol": "max706tesa.kicad_sym",
      "footprint": "max706tesa.kicad_mod",
      "model_3d": "max706tesa-hero.glb",
      "model_3d_plain": "max706tesa-etched.glb",
      "model_3d_step": "max706tesa-etched.step",
      "model_3d_step_plain": "max706tesa.step",
      "lbr": "max706tesa.lbr"
    },
    "distributor_links": {
      "lcsc": "C32710640"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T05:21:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MRN",
        "type": "input",
        "description": "Active-low hardware reset input; holding it low holds RESETN low and resets the watchdog, with MRN low-level input voltage at most 0.8 V and high-level input voltage at least 3 V (VDD=5 V)."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage, 1 V to 5.5 V recommended (absolute maximum -0.3 V to 6.0 V); RESETN is valid for VDD above 1 V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; all voltages are referenced to this pin."
      },
      {
        "number": "4",
        "name": "PFI",
        "type": "input",
        "description": "Independent voltage detection input compared against an internal 1.25 V reference (1.20 V to 1.30 V), with input current at most 0.1 µA over 0 to VDD."
      },
      {
        "number": "5",
        "name": "PFON",
        "type": "output",
        "description": "Independent voltage detection output that goes high when PFI is above 1.25 V and low when it is below; VOH at least 3.5 V at 800 µA and VOL at most 0.4 V at 3.2 mA."
      },
      {
        "number": "6",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input; any rising or falling edge restarts the watchdog timer, a level held for about 1.6 s (typical) lets it time out, and leaving it floating disables the watchdog (VIH at least 3.5 V, VIL at most 0.8 V)."
      },
      {
        "number": "7",
        "name": "RESETN",
        "type": "output",
        "description": "Active-low power-supply reset output that goes low when VDD falls below the selected threshold VT and goes high about 200 ms (typical) after VDD rises above VT; it cannot guarantee a valid low below 1 V, so a 100 kΩ pull-down is recommended in that range."
      },
      {
        "number": "8",
        "name": "WDON",
        "type": "output",
        "description": "Watchdog output that is high while WDI is toggling with RESETN high and goes low on watchdog timeout or during reset; VOH at least 3.5 V at 800 µA and VOL at most 0.4 V at 1.2 mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-function table (section 2.3, page 4) gives the pin numbers, names, I/O directions and functi; Section 4.3 refers to the reset output as 'RESET' while the pin table and figures use 'RESETN'. The ; The MPN MAX706TESA appears in the ordering list as MAX706TESA(LX) in SOP8 packing, so the SOP8 pinou"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0512,
        "at": "2026-10-19T05:19:28"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603388806553366528",
        "pages": 10,
        "sha256": "02d33fd125ef351c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max706tesa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max706tesa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "333ea86b05aedc148bd428048215a7e42fa13c65c86b73d3ef1a90eed5a2d257",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}