main
Ray
max706tesa-hxy: laser-etched CAD + chip hero (factory 2.0.0 backfill)
0417b26
MAX706TESA-HXY
HXY MOSFET · Supervisor and Reset ICs · SOP-8
MAX706TESA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | !MR | input | Manual reset input, active low. Internal ~20kΩ pull-up to VCC. A logic low for at least tMR (150ns min) asserts the reset outputs. |
| 2 | VCC | power_in | Supply voltage input. Operating range 3.0V to 5.5V for the 706R/706T family (typ. 5V). Reset asserted when VCC falls below VRT = 3.08V (typ) for the T variant. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | PFI | input | Power-fail comparator inverting input, 1.25V (typ) internal reference. Drives !PFO low when PFI falls below 1.25V. Tie to GND or VCC if unused. Input current ±25nA. |
| 5 | !PFO | output | Power-fail comparator output, active low. Goes low when PFI < 1.25V (typ). Push-pull; VOL ≤ 0.4V at 3.2mA sink, VOH ≥ VCC-1.5V at 800µA source. |
| 6 | WDI | input | Watchdog input. If not toggled within tWD (1.6s typ), !WDO is asserted low. Leave floating (high impedance) to disable the watchdog. Min pulse width tWP = 50ns at VCC ≥ 4.5V. |
| 7 | !RESET | output | Active-low reset output. Asserted when VCC < VRT (3.08V typ for T), when !MR is asserted, or during power-up. Remains asserted for tRS (200ms typ) after VCC returns above VRT. Push-pull output. |
| 8 | !WDO | output | Watchdog output, active low. Goes low if WDI is not toggled within the watchdog timeout tWD (1.6s typ), or during reset. Push-pull; VOL ≤ 0.4V at 1.2mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MAX706TESA-HXYMAX706TESA-HXYEPAMAX706TESA-HXYCPAMAX706TESA-HXYEUAMAX706TESA-HXYCUA
CAD (KiCad official)
- Symbol:
MAX706TESA-HXY - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max706tesa-hxy-etched.step/max706tesa-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max706tesa-hxy.step/max706tesa-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (20 pp, sha256
519b55ef659b3c93, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX706TESA-HXY
**HXY MOSFET** · Supervisor and Reset ICs · SOP-8
MAX706TESA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | !MR | input | Manual reset input, active low. Internal ~20kΩ pull-up to VCC. A logic low for at least tMR (150ns min) asserts the reset outputs. |
| 2 | VCC | power_in | Supply voltage input. Operating range 3.0V to 5.5V for the 706R/706T family (typ. 5V). Reset asserted when VCC falls below VRT = 3.08V (typ) for the T variant. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | PFI | input | Power-fail comparator inverting input, 1.25V (typ) internal reference. Drives !PFO low when PFI falls below 1.25V. Tie to GND or VCC if unused. Input current ±25nA. |
| 5 | !PFO | output | Power-fail comparator output, active low. Goes low when PFI < 1.25V (typ). Push-pull; VOL ≤ 0.4V at 3.2mA sink, VOH ≥ VCC-1.5V at 800µA source. |
| 6 | WDI | input | Watchdog input. If not toggled within tWD (1.6s typ), !WDO is asserted low. Leave floating (high impedance) to disable the watchdog. Min pulse width tWP = 50ns at VCC ≥ 4.5V. |
| 7 | !RESET | output | Active-low reset output. Asserted when VCC < VRT (3.08V typ for T), when !MR is asserted, or during power-up. Remains asserted for tRS (200ms typ) after VCC returns above VRT. Push-pull output. |
| 8 | !WDO | output | Watchdog output, active low. Goes low if WDI is not toggled within the watchdog timeout tWD (1.6s typ), or during reset. Push-pull; VOL ≤ 0.4V at 1.2mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `MAX706TESA-HXY`
- `MAX706TESA-HXYEPA`
- `MAX706TESA-HXYCPA`
- `MAX706TESA-HXYEUA`
- `MAX706TESA-HXYCUA`
## CAD (KiCad official)
- Symbol: `MAX706TESA-HXY`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `max706tesa-hxy-etched.step` / `max706tesa-hxy-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max706tesa-hxy.step` / `max706tesa-hxy.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](docs/max706tesa-hxy-datasheet.pdf) (20 pp, sha256 `519b55ef659b3c93`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max706tesa-hxy-datasheet.pdf)