MAX706SCSA

{
  "slug": "max706scsa",
  "version": "0.1.0",
  "type": "component",
  "description": "MSKSEMI Supervisor And Reset ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "max706scsa",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max706scsa.kicad_sym",
    "max706scsa.kicad_mod",
    "max706scsa.glb",
    "max706scsa.step",
    "max706scsa.lbr",
    "docs/hero.png",
    "docs/max706scsa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max706scsa-hero.glb",
    "max706scsa-hero.overlay.json",
    "max706scsa-etched.glb"
  ],
  "component": {
    "mpn": "MAX706SCSA",
    "manufacturer": "MSKSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904313722597376",
    "parts": {
      "symbol": "max706scsa.kicad_sym",
      "footprint": "max706scsa.kicad_mod",
      "model_3d": "max706scsa-hero.glb",
      "model_3d_plain": "max706scsa-etched.glb",
      "model_3d_step": "max706scsa-etched.step",
      "model_3d_step_plain": "max706scsa.step",
      "lbr": "max706scsa.lbr"
    },
    "distributor_links": {
      "lcsc": "C6454434"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T23:52:50Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "!MR",
        "type": "input",
        "description": "Manual reset input, with an internal 20kΩ typical pull-up (10 to 40kΩ)."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage; the 706S operates from 3.3V to 5.5V and its reset threshold is 2.93V typical."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "4",
        "name": "PFI",
        "type": "input",
        "description": "Inverting input of the internal 1.25V comparator (power-fail threshold 1.25V typical)."
      },
      {
        "number": "5",
        "name": "!PFO",
        "type": "output",
        "description": "Output of the internal 1.25V comparator."
      },
      {
        "number": "6",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input; leaving it floating disables the watchdog function (1.6s typical timeout)."
      },
      {
        "number": "7",
        "name": "!RESET",
        "type": "output",
        "description": "Active-low reset signal output, with a 200ms typical reset pulse width."
      },
      {
        "number": "8",
        "name": "!WDO",
        "type": "output",
        "description": "Watchdog output."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-function table on page 4 numbers its ten entries 1 to 10 with VCC as pin 1 and MR as pin 3, ; The right-side pin order (PFO, WDI, WDO, RESET/!RESET at pins 5 to 8) was inferred from the garbled ; The page 3 figure is labelled 8-PIN MicroSOP, while the ordering table lists 8-SOP. The text does no"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0665,
        "at": "2026-10-17T23:50:48"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904313722597376",
        "pages": 20,
        "sha256": "a5d1d68be0f7c959",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max706scsa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max706scsa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a57dd5356a93fa93a981eb8eb69a667aac273f3e75e6488f958778ac9f461832",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}