← Commit history
page.json+11−8@@ -32,13 +32,13 @@ "number": "1", "name": "!MR", "type": "input",- "description": "Manual reset input, active-low. Internally pulled up to VCC through a nominal 20 k\u03a9 resistor (10-40 k\u03a9). Pulling this pin low for at least tMR (150 ns @ VCC\u22654.5V, 500 ns for P/R/S/T at low VCC) asserts the reset outputs."+ "description": "Manual reset input, active-low. Internally pulled up to VCC through a nominal 20 kΩ resistor (10-40 kΩ). Pulling this pin low for at least tMR (150 ns @ VCC≥4.5V, 500 ns for P/R/S/T at low VCC) asserts the reset outputs." }, { "number": "2", "name": "VCC", "type": "power_in",- "description": "Supply voltage input. Operating range 3.0V-5.5V for the P version (706P/R). Reset threshold is 2.63V (typ) with 40 mV hysteresis; ICC \u2248 75 \u00b5A typ (140 \u00b5A max)."+ "description": "Supply voltage input. Operating range 3.0V-5.5V for the P version (706P/R). Reset threshold is 2.63V (typ) with 40 mV hysteresis; ICC ≈ 75 µA typ (140 µA max)." }, { "number": "3",@@ -50,31 +50,31 @@ "number": "4", "name": "PFI", "type": "input",- "description": "Power-fail comparator inverting input. Referenced to the internal 1.25V bandgap (1.20V-1.30V). Input current \u00b125 nA max. Used with an external divider to monitor a battery or secondary rail; drives !PFO low when PFI falls below 1.25V."+ "description": "Power-fail comparator inverting input. Referenced to the internal 1.25V bandgap (1.20V-1.30V). Input current ±25 nA max. Used with an external divider to monitor a battery or secondary rail; drives !PFO low when PFI falls below 1.25V." }, { "number": "5", "name": "!PFO", "type": "output",- "description": "Power-fail comparator output, active-low push-pull. VOH \u2265 VCC\u22121.5V @ 800 \u00b5A source; VOL \u2264 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)."+ "description": "Power-fail comparator output, active-low push-pull. VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)." }, { "number": "6", "name": "WDI", "type": "input",- "description": "Watchdog input. Must be toggled within tWD (1.6 s typ, 2.25 s max) or a reset is generated. Leave floating (high-Z) to disable the watchdog. Minimum pulse width tWP = 50 ns @ VCC\u22654.5V; input current \u00b1150 \u00b5A max."+ "description": "Watchdog input. Must be toggled within tWD (1.6 s typ, 2.25 s max) or a reset is generated. Leave floating (high-Z) to disable the watchdog. Minimum pulse width tWP = 50 ns @ VCC≥4.5V; input current ±150 µA max." }, { "number": "7", "name": "RESET", "type": "output",- "description": "Active-HIGH reset output (706P version outputs RESET, not !RESET). Asserted while VCC is below the 2.63V threshold and held high for tRS = 200 ms (typ) after VCC rises above threshold, or while !MR is low, or when a watchdog timeout occurs. Push-pull: VOH \u2265 VCC\u22121.5V @ 800 \u00b5A source; VOL \u2264 0.4V @ 3.2 mA sink."+ "description": "Active-HIGH reset output (706P version outputs RESET, not !RESET). Asserted while VCC is below the 2.63V threshold and held high for tRS = 200 ms (typ) after VCC rises above threshold, or while !MR is low, or when a watchdog timeout occurs. Push-pull: VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 3.2 mA sink." }, { "number": "8", "name": "!WDO", "type": "output",- "description": "Watchdog output, active-low. Pulses low when the watchdog timer expires (WDI not toggled within tWD). VOH \u2265 VCC\u22121.5V @ 800 \u00b5A source; VOL \u2264 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)."+ "description": "Watchdog output, active-low. Pulses low when the watchdog timer expires (WDI not toggled within tWD). VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)." } ], "provenance": {@@ -160,5 +160,8 @@ "docs/max706pcsa-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }