← Commit history

max706pcsa: factory component page (tier=lcsc)

Ray ·6972ca4181 · ·parent ee73174
1 file changed +138−8
page.json+138−8
@@ -1,13 +1,148 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "max706pcsa",+  "title": "MAX706PCSA",+  "brief": "MSKSEMI Supervisor and Reset ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "MSKSEMI Supervisor and Reset ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "max706pcsa"   ],+  "component": {+    "mpn": "MAX706PCSA",+    "manufacturer": "MSKSEMI",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "PMIC",+    "subcategory": "Supervisor and Reset ICs",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2305231111_MSKSEMI-MAX706PCSA_C6454432.pdf",+    "parts": {+      "symbol": "max706pcsa.kicad_sym",+      "footprint": "max706pcsa.kicad_mod",+      "model_3d": "max706pcsa.glb",+      "model_3d_step": "max706pcsa.step",+      "lbr": "max706pcsa.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "!MR",+        "type": "input",+        "description": "Manual reset input, active-low. Internally pulled up to VCC through a nominal 20 k\u03a9 resistor (10-40 k\u03a9). Pulling this pin low for at least tMR (150 ns @ VCC\u22654.5V, 500 ns for P/R/S/T at low VCC) asserts the reset outputs."+      },+      {+        "number": "2",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input. Operating range 3.0V-5.5V for the P version (706P/R). Reset threshold is 2.63V (typ) with 40 mV hysteresis; ICC \u2248 75 \u00b5A typ (140 \u00b5A max)."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for supply and all I/O."+      },+      {+        "number": "4",+        "name": "PFI",+        "type": "input",+        "description": "Power-fail comparator inverting input. Referenced to the internal 1.25V bandgap (1.20V-1.30V). Input current \u00b125 nA max. Used with an external divider to monitor a battery or secondary rail; drives !PFO low when PFI falls below 1.25V."+      },+      {+        "number": "5",+        "name": "!PFO",+        "type": "output",+        "description": "Power-fail comparator output, active-low push-pull. VOH \u2265 VCC\u22121.5V @ 800 \u00b5A source; VOL \u2264 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)."+      },+      {+        "number": "6",+        "name": "WDI",+        "type": "input",+        "description": "Watchdog input. Must be toggled within tWD (1.6 s typ, 2.25 s max) or a reset is generated. Leave floating (high-Z) to disable the watchdog. Minimum pulse width tWP = 50 ns @ VCC\u22654.5V; input current \u00b1150 \u00b5A max."+      },+      {+        "number": "7",+        "name": "RESET",+        "type": "output",+        "description": "Active-HIGH reset output (706P version outputs RESET, not !RESET). Asserted while VCC is below the 2.63V threshold and held high for tRS = 200 ms (typ) after VCC rises above threshold, or while !MR is low, or when a watchdog timeout occurs. Push-pull: VOH \u2265 VCC\u22121.5V @ 800 \u00b5A source; VOL \u2264 0.4V @ 3.2 mA sink."+      },+      {+        "number": "8",+        "name": "!WDO",+        "type": "output",+        "description": "Watchdog output, active-low. Pulses low when the watchdog timer expires (WDI not toggled within tWD). VOH \u2265 VCC\u22121.5V @ 800 \u00b5A source; VOL \u2264 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2305231111_MSKSEMI-MAX706PCSA_C6454432.pdf",+        "pages": 20,+        "sha256": "a5d1d68be0f7c959",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "MSKSEMI",+      "Package": "SOP-8",+      "Category": "PMIC",+      "Pins": "8"+    }+  },+  "variants": [+    {+      "mpn": "MAX706PCSACPA",+      "kind": "packaging"+    },+    {+      "mpn": "MAX706PCSA",+      "kind": "packaging"+    },+    {+      "mpn": "MAX706PCSAESA",+      "kind": "packaging"+    },+    {+      "mpn": "MAX706PCSACUA",+      "kind": "packaging"+    },+    {+      "mpn": "MAX706PCSAEUA",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "max706pcsa"+  ],+  "discovery_pitch": "MAX706PCSA (MSKSEMI) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +160,5 @@     "docs/max706pcsa-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file