component
MAX706ESA+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MAX706ESA+T
Analog Devices Inc Maxim Integrated · Supervisor And Reset ICs · SOIC-8
MAX706ESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Active-low manual-reset input that triggers a reset pulse when pulled below 0.8V, with an internal 250µA pullup, and is TTL/CMOS compatible. |
| 2 | VCC | power_in | +5V supply input; the datasheet's absolute maximum rating for VCC is -0.3V to 6.0V with respect to GND. |
| 3 | GND | power_in | 0V ground reference for all signals. |
| 4 | PFI | input | Power-fail voltage-monitor input whose threshold is 1.25V; PFO goes low when PFI is below 1.25V, and PFI should be connected to GND or VCC when not used. |
| 5 | PFO | output | Power-fail output that goes low and sinks current when PFI is below 1.25V, and otherwise stays high. |
| 6 | WDI | input | Watchdog input: if WDI remains high or low for 1.6s the watchdog timer times out and WDO goes low, while floating or three-stating WDI disables the watchdog; pulses as short as 50ns can be detected. |
| 7 | RESET | output | Active-low reset output that pulses low for 200ms when triggered and stays low whenever VCC is below the reset threshold (4.40V for the MAX706), remaining low for 200ms after VCC rises above the threshold or MR goes high. |
| 8 | WDO | output | Watchdog output that pulls low when the watchdog timer completes its 1.6s count and stays low until the watchdog is cleared, and also goes low during low-line conditions when VCC is below the reset threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Terminal voltage VCC (with respect to GND) | VCC | -0.3 | 6 | V | With respect to GND | 2 | |
| Operating temperature range MAX70_E | -40 | 85 | °C | MAX70_E__ grade (MAX706ESA) | 2 | ||
| Storage temperature range | -65 | 160 | °C | 2 | |||
| Lead temperature (soldering, 10s) | 300 | °C | Soldering, 10s | 2 | |||
| Soldering temperature (reflow), lead(Pb)-free | 260 | °C | Lead(Pb)-free | 2 | |||
| Soldering temperature (reflow), containing lead | 240 | °C | Containing lead(Pb) | 2 | |||
| Operating voltage range | VCC | 1.2 | 5.5 | V | MAX70_E/M, MAX813LE/M | 2 | |
| Supply current | ISUPPLY | 150 | 500 | µA | MAX705E/M, MAX706E/M, MAX813LE/M | 2 | |
| Reset threshold | VRT | 4.25 | 4.4 | 4.5 | V | MAX706, MAX708 (table row for MAX706) | 2 |
| Reset threshold hysteresis | 40 | mV | 2 | ||||
| Reset pulse width | tRS | 140 | 200 | 280 | ms | 2 | |
| RESET output voltage (low) | 0.4 | V | ISINK = 3.2mA | 2 | |||
| RESET output voltage (low) | 0.3 | V | MAX70_E/M, VCC = 1.2V, ISINK = 100µA | 2 | |||
| WDO output voltage (low) | 0.4 | V | MAX705, MAX706, MAX813L, ISINK = 1.2mA | 3 | |||
| Watchdog timeout period | tWD | 1 | 1.6 | 2.25 | s | MAX705, MAX706, MAX813L | 3 |
| WDI pulse width | tWP | 50 | ns | VIL = 0.4V, VIH = (VCC)(0.8) | 3 | ||
| WDI input threshold low | 0.8 | V | MAX705, MAX706, MAX813L, VCC = 5V | 3 | |||
| WDI input threshold high | 3.5 | V | MAX705, MAX706, MAX813L, VCC = 5V | 3 | |||
| WDI input current | 50 | 150 | µA | MAX705, MAX706, MAX813L, VCC = 5V | 3 | ||
| WDI input current | -150 | -50 | µA | MAX705, MAX706, MAX813L, WDI = 0V | 3 | ||
| MR pull-up current | 100 | 250 | 600 | µA | MR = 0V | 3 | |
| MR pulse width | tMR | 150 | ns | 3 | |||
| MR input threshold low | 0.8 | V | 3 | ||||
| MR input threshold high | 2 | V | 3 | ||||
| MR to reset out delay | tMD | 250 | ns | (Note 2) | 3 | ||
| PFI input threshold | 1.2 | 1.25 | 1.3 | V | VCC = 5V | 3 | |
| PFI input current | -25 | 0.01 | 25 | nA | 3 | ||
| PFO output voltage (low) | 0.4 | V | ISINK = 3.2mA | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | MAX813LCPA 0°C to +70°C 8 Plastic DIP | 9 |
CAD (KiCad official)
- Symbol:
MAX706ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max706esa-t-etched.step/max706esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max706esa-t.step/max706esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (12 pp, sha256
c61d0b7c479fd277, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX706ESA+T
**Analog Devices Inc Maxim Integrated** · Supervisor And Reset ICs · SOIC-8
MAX706ESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Active-low manual-reset input that triggers a reset pulse when pulled below 0.8V, with an internal 250µA pullup, and is TTL/CMOS compatible. |
| 2 | VCC | power_in | +5V supply input; the datasheet's absolute maximum rating for VCC is -0.3V to 6.0V with respect to GND. |
| 3 | GND | power_in | 0V ground reference for all signals. |
| 4 | PFI | input | Power-fail voltage-monitor input whose threshold is 1.25V; PFO goes low when PFI is below 1.25V, and PFI should be connected to GND or VCC when not used. |
| 5 | PFO | output | Power-fail output that goes low and sinks current when PFI is below 1.25V, and otherwise stays high. |
| 6 | WDI | input | Watchdog input: if WDI remains high or low for 1.6s the watchdog timer times out and WDO goes low, while floating or three-stating WDI disables the watchdog; pulses as short as 50ns can be detected. |
| 7 | RESET | output | Active-low reset output that pulses low for 200ms when triggered and stays low whenever VCC is below the reset threshold (4.40V for the MAX706), remaining low for 200ms after VCC rises above the threshold or MR goes high. |
| 8 | WDO | output | Watchdog output that pulls low when the watchdog timer completes its 1.6s count and stays low until the watchdog is cleared, and also goes low during low-line conditions when VCC is below the reset threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Terminal voltage VCC (with respect to GND) | VCC | -0.3 | | 6 | V | With respect to GND | 2 |
| Operating temperature range MAX70_E | | -40 | | 85 | °C | MAX70_E__ grade (MAX706ESA) | 2 |
| Storage temperature range | | -65 | | 160 | °C | | 2 |
| Lead temperature (soldering, 10s) | | | | 300 | °C | Soldering, 10s | 2 |
| Soldering temperature (reflow), lead(Pb)-free | | | | 260 | °C | Lead(Pb)-free | 2 |
| Soldering temperature (reflow), containing lead | | | | 240 | °C | Containing lead(Pb) | 2 |
| Operating voltage range | VCC | 1.2 | | 5.5 | V | MAX70_E/M, MAX813LE/M | 2 |
| Supply current | ISUPPLY | | 150 | 500 | µA | MAX705E/M, MAX706E/M, MAX813LE/M | 2 |
| Reset threshold | VRT | 4.25 | 4.4 | 4.5 | V | MAX706, MAX708 (table row for MAX706) | 2 |
| Reset threshold hysteresis | | | 40 | | mV | | 2 |
| Reset pulse width | tRS | 140 | 200 | 280 | ms | | 2 |
| RESET output voltage (low) | | | | 0.4 | V | ISINK = 3.2mA | 2 |
| RESET output voltage (low) | | | | 0.3 | V | MAX70_E/M, VCC = 1.2V, ISINK = 100µA | 2 |
| WDO output voltage (low) | | | | 0.4 | V | MAX705, MAX706, MAX813L, ISINK = 1.2mA | 3 |
| Watchdog timeout period | tWD | 1 | 1.6 | 2.25 | s | MAX705, MAX706, MAX813L | 3 |
| WDI pulse width | tWP | 50 | | | ns | VIL = 0.4V, VIH = (VCC)(0.8) | 3 |
| WDI input threshold low | | | | 0.8 | V | MAX705, MAX706, MAX813L, VCC = 5V | 3 |
| WDI input threshold high | | 3.5 | | | V | MAX705, MAX706, MAX813L, VCC = 5V | 3 |
| WDI input current | | 50 | | 150 | µA | MAX705, MAX706, MAX813L, VCC = 5V | 3 |
| WDI input current | | -150 | | -50 | µA | MAX705, MAX706, MAX813L, WDI = 0V | 3 |
| MR pull-up current | | 100 | 250 | 600 | µA | MR = 0V | 3 |
| MR pulse width | tMR | 150 | | | ns | | 3 |
| MR input threshold low | | | | 0.8 | V | | 3 |
| MR input threshold high | | 2 | | | V | | 3 |
| MR to reset out delay | tMD | | | 250 | ns | (Note 2) | 3 |
| PFI input threshold | | 1.2 | 1.25 | 1.3 | V | VCC = 5V | 3 |
| PFI input current | | -25 | 0.01 | 25 | nA | | 3 |
| PFO output voltage (low) | | | | 0.4 | V | ISINK = 3.2mA | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | | MAX813LCPA 0°C to +70°C 8 Plastic DIP | 9 |
## CAD (KiCad official)
- Symbol: `MAX706ESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `max706esa-t-etched.step` / `max706esa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max706esa-t.step` / `max706esa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586176496817328128) (12 pp, sha256 `c61d0b7c479fd277`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max706esa-t-datasheet.pdf)