main
Ray max706csa: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 3a403bb
{
  "slug": "max706csa",
  "version": "0.1.0",
  "type": "component",
  "description": "MSKSEMI Supervisor and Reset ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "max706csa"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max706csa.kicad_sym",
    "max706csa.kicad_mod",
    "max706csa.glb",
    "max706csa.step",
    "max706csa.lbr",
    "docs/hero.png",
    "docs/max706csa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max706csa-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "MAX706CSA",
    "manufacturer": "MSKSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Supervisor and Reset ICs",
    "parts": {
      "symbol": "max706csa.kicad_sym",
      "footprint": "max706csa.kicad_mod",
      "model_3d": "max706csa-etched.glb",
      "model_3d_plain": "max706csa.glb",
      "model_3d_step": "max706csa-etched.step",
      "model_3d_step_plain": "max706csa.step",
      "lbr": "max706csa.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "!MR",
        "type": "input",
        "description": "Active-low manual reset input. A logic low on this pin asserts !RESET regardless of VCC. Internally pulled up to VCC through a 20kΩ (typ) resistor; minimum pulse width 150ns (4.5V<VCC<5.5V)."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input. Operating range 4.8V to 5.5V for the 706 variant; supply current ICC ≈ 75µA typical (140µA max)."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0V) for the device."
      },
      {
        "number": "4",
        "name": "PFI",
        "type": "input",
        "description": "Power-fail comparator input (non-inverting side referenced to internal 1.25V ± 0.05V reference). When PFI falls below 1.25V, !PFO asserts low. Input current ±25nA max. Typically used with an external resistor divider from the monitored rail; tie to VCC or GND if unused."
      },
      {
        "number": "5",
        "name": "!PFO",
        "type": "output",
        "description": "Active-low power-fail comparator output. Goes low when PFI drops below the 1.25V reference. Push-pull output: VOL ≤ 0.4V @ 3.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V)."
      },
      {
        "number": "6",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input. If WDI remains high or low longer than the watchdog timeout tWD (≈1.6s typ), !WDO asserts and a reset is generated. Leave floating to disable the watchdog function. Minimum pulse width 50ns (4.5V<VCC<5.5V)."
      },
      {
        "number": "7",
        "name": "!WDO",
        "type": "output",
        "description": "Active-low watchdog output. Asserts low when the watchdog timer expires (no WDI transition within tWD). Push-pull output: VOL ≤ 0.4V @ 1.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V)."
      },
      {
        "number": "8",
        "name": "!RESET",
        "type": "output",
        "description": "Active-low reset output. Asserts when VCC falls below the reset threshold VRT (4.40V typ for 706) or when !MR is pulled low, and remains asserted for tRS ≈ 200ms after VCC returns above VRT. Push-pull output: VOL ≤ 0.4V @ 3.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C6454431",
      "digikey": "MAX706CSA-ND",
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:07:18Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "MAX706CSA-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "max706csa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max706csa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ae4f97b1b3e732f32b906b8699d152ad95fed52d764f9d509b9e3b2f132aa4c9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}