main
Ray
max705esa-hxy: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
bba9156
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "max705esa-hxy",
"version": "0.1.0",
"type": "component",
"description": "HXY MOSFET Supervisor and Reset ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"max705esa-hxy"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"max705esa-hxy.kicad_sym",
"max705esa-hxy.kicad_mod",
"max705esa-hxy.glb",
"max705esa-hxy.step",
"max705esa-hxy.lbr",
"docs/hero.png",
"docs/max705esa-hxy-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"max705esa-hxy-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "MAX705ESA-HXY",
"manufacturer": "HXY MOSFET",
"package": "SOP-8",
"pin_count": 8,
"category": "Supervisor and Reset ICs",
"parts": {
"symbol": "max705esa-hxy.kicad_sym",
"footprint": "max705esa-hxy.kicad_mod",
"model_3d": "max705esa-hxy-etched.glb",
"model_3d_plain": "max705esa-hxy.glb",
"model_3d_step": "max705esa-hxy-etched.step",
"model_3d_step_plain": "max705esa-hxy.step",
"lbr": "max705esa-hxy.lbr"
},
"pins": [
{
"number": "1",
"name": "!MR",
"type": "input",
"description": "Active-low Manual Reset input. Internally pulled up to VCC through ~20kΩ (10kΩ min / 40kΩ max). Driving !MR low for at least tMR (150ns at 4.5V<VCC<5.5V) forces !RESET low; !RESET remains asserted for tRS (typ 200ms) after !MR is released. Input thresholds: VIH ≥ 2.0V, VIL ≤ 0.8V at VCC = 5V."
},
{
"number": "2",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input. For MAX705, operating range is 5.0V-5.5V; reset threshold VRT = 4.65V (typ, 4.50V min / 4.75V max). Typical supply current ICC = 75µA."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Device ground reference. Connect to system 0V."
},
{
"number": "4",
"name": "PFI",
"type": "input",
"description": "Power-Fail Comparator inverting Input. Compared internally against a 1.25V reference (1.20V min / 1.30V max). Input current ±25nA max. When PFI falls below 1.25V, !PFO is driven low. Tie to GND or VCC when not used."
},
{
"number": "5",
"name": "!PFO",
"type": "output",
"description": "Active-low Power-Fail Comparator Output. Goes low when PFI < 1.25V. Push-pull: VOH ≥ VCC−1.5V at ISOURCE = 800µA, VOL ≤ 0.4V at ISINK = 3.2mA (4.5V<VCC<5.5V)."
},
{
"number": "6",
"name": "WDI",
"type": "input",
"description": "Watchdog Input. Must be toggled within the tWD window (1.0s min / 1.6s typ / 2.25s max) or !WDO asserts low. Minimum pulse width tWP = 50ns (4.5V<VCC<5.5V). VIH ≥ 3.5V, VIL ≤ 0.8V at VCC = 5V. Leave floating to disable the watchdog function."
},
{
"number": "7",
"name": "!RESET",
"type": "output",
"description": "Active-low Reset Output. Asserted low whenever VCC falls below VRT (4.65V typ for MAX705) or !MR is pulled low; remains low for tRS ≈ 200ms after VCC/!MR returns valid. Push-pull: VOH ≥ VCC−1.5V at ISOURCE = 800µA, VOL ≤ 0.4V at ISINK = 3.2mA (4.5V<VCC<5.5V)."
},
{
"number": "8",
"name": "!WDO",
"type": "output",
"description": "Active-low Watchdog Output. Goes low when WDI is not toggled within tWD (typ 1.6s). Push-pull: VOH ≥ VCC−1.5V at ISOURCE = 800µA, VOL ≤ 0.4V at ISINK = 1.2mA (4.5V<VCC<5.5V)."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C19626951",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:07:16Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "max705esa-hxy.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "max705esa-hxy-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "ca3230f7c62c1a6dfaacd984aa84d6fe76fec23b38219fdb6a86d431b9757e12",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}