main
Ray
Publish 0.1.0
860f652
MAX6971AUG+T
Maxim Integrated · LED Drivers · TSSOP-24
MAX6971AUG+T from Maxim Integrated, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device; V+ and all logic inputs are referenced to this pin. |
| 2 | DIN | input | Serial-data input, sampled on the rising edge of CLK and shifted into the 16-bit shift register MSB first; absolute maximum is -0.3V to (V+ + 0.3V). |
| 3 | CLK | input | Serial-clock input; data at DIN is loaded into the internal 16-bit shift register on its rising edge, with a clock period of at least 40ns at 5V. |
| 4 | LE | input | Load-enable input; the shift register passes transparently to the output latches while LE is high and the data latches on LE's falling edge. |
| 5 | OUT0 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 6 | OUT1 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 7 | OUT2 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 8 | OUT3 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 9 | OUT4 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 10 | OUT5 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 11 | OUT6 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 12 | OUT7 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 13 | OUT8 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 14 | OUT9 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 15 | OUT10 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 16 | OUT11 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 17 | OUT12 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 18 | OUT13 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 19 | OUT14 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 20 | OUT15 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 21 | OE | input | Output-enable input; high forces OUT0-OUT15 to high impedance without changing the latch contents, and low lets the outputs follow the latches, making it usable as a PWM input. |
| 22 | DOUT | output | Serial-data output that shifts data out of the 16-bit shift register on CLK's rising edge, appearing 16 clock cycles after DIN; limited to ±10mA. |
| 23 | SET | passive | LED current-setting pin; connect to GND through resistor RSET (minimum 327.3Ω for 55mA, reference 360Ω for 50mA, maximum 5kΩ). |
| 24 | V+ | power_in | Positive supply voltage, specified from 3.0V to 5.5V; bypass V+ to GND with a 0.1µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | TSSOP-24 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | V+ | 3 | 5.5 | V | 2 | ||
| Output Current OUT_ | IOUT | 37 | 50 | 61 | mA | V+ = 3V to 5.5V, VOUT = 0.8V to 2.5V, RSET = 360Ω | 2 |
| Input Leakage Current DIN, CLK, LE, OE | IIH, IIL | -1 | 1 | µA | 2 | ||
| Output Low Voltage | VOL | 0.5 | V | ISINK = 4mA | 2 | ||
| Output Leakage Current OUT_ | ILEAK | 1 | µA | OE = V+ | 2 | ||
| Output Voltage | VOUT | 36 | V | 2 | |||
| Hysteresis Voltage DIN, CLK, LE, OE | ΔVI | 0.8 | V | 2 | |||
| Standby Current (Interface Idle, All Output Ports High Impedance) | I+ | 5.7 | 8 | mA | RSET = 360Ω; all logic inputs at V+ or GND, DOUT unloaded | 2 | |
| Standby Current (Interface Running, All Output Ports High Impedance) | I+ | 6 | 8.5 | mA | RSET = 360Ω; fCLK = 5MHz, OE = V+, DIN and LE = V+ or GND, DOUT unloaded | 2 | |
| Supply Current (Interface Idle, All Output Ports Active Low) | I+ | 18 | 25 | mA | RSET = 360Ω; all logic inputs at V+ or GND, DOUT unloaded | 2 | |
| CLK Clock Period | tCP | 52 | ns | 4 | |||
| CLK Pulse-Width High | tCH | 24 | ns | 4 | |||
| CLK Pulse-Width Low | tCL | 24 | ns | 4 | |||
| DIN Setup Time | tDS | 4 | ns | 4 | |||
| DIN Hold Time | tDH | 8 | ns | 4 | |||
| DOUT Propagation Delay | tDO | 12 | 50 | ns | 4 | ||
| DOUT Rise and Fall Time | tDR, tDF | 12 | ns | CDOUT = 10pF, 20% to 80% | 4 | ||
| LE Pulse-Width High | tLW | 20 | ns | 4 | |||
| LE Setup Time | tLS | 15 | ns | 4 | |||
| LE Rising to OUT_ Rising Delay | tLRR | 120 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 | ||
| LE Rising to OUT_ Falling Delay | tLRF | 310 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 | ||
| CLK Rising to OUT_ Rising Delay | tCRR | 120 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 | ||
| CLK Rising to OUT_ Falling Delay | tCRF | 330 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 | ||
| OE Rising to OUT_ Rising Delay | tOEH | 120 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 | ||
| OE Falling to OUT_ Falling Delay | tOEL | 330 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 | ||
| LED Output OUT_ Turn-On Fall Time | tf | 120 | ns | 80% to 20% (Note 3) | 4 | ||
| LED Output OUT_ Turn-Off Rise Time | tr | 120 | ns | 20% to 80% (Note 3) | 4 | ||
| Supply Voltage V+ (Absolute Maximum) | V+ | -0.3 | 6 | V | Voltage with respect to GND | 2 | |
| OUT_ Voltage (Absolute Maximum) | OUT_ | -0.3 | 40 | V | Voltage with respect to GND | 2 | |
| Logic Input Voltage DIN, CLK, LE, OE, SET (Absolute Maximum) | DIN, CLK, LE, OE, SET | -0.3 | V | Voltage with respect to GND | 2 | ||
| DOUT Current | DOUT | -10 | 10 | mA | 2 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature | TLEAD | 300 | °C | Soldering, 10s | 2 | ||
| Derating above +70°C, 24-Pin TSSOP | 12.2 | mW/°C | Derate over +70°C | 2 | |||
| Junction-to-Ambient Thermal Resistance, 24-Pin TSSOP | θJA | 82 | °C/W | 24-Pin TSSOP | 9 |
CAD (KiCad official)
- Symbol:
MAX6971AUG+T - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
max6971aug-t-etched.step/max6971aug-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6971aug-t.step/max6971aug-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (12 pp, sha256
5efc36f2b63fb9b0, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX6971AUG+T
**Maxim Integrated** · LED Drivers · TSSOP-24
MAX6971AUG+T from Maxim Integrated, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device; V+ and all logic inputs are referenced to this pin. |
| 2 | DIN | input | Serial-data input, sampled on the rising edge of CLK and shifted into the 16-bit shift register MSB first; absolute maximum is -0.3V to (V+ + 0.3V). |
| 3 | CLK | input | Serial-clock input; data at DIN is loaded into the internal 16-bit shift register on its rising edge, with a clock period of at least 40ns at 5V. |
| 4 | LE | input | Load-enable input; the shift register passes transparently to the output latches while LE is high and the data latches on LE's falling edge. |
| 5 | OUT0 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 6 | OUT1 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 7 | OUT2 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 8 | OUT3 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 9 | OUT4 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 10 | OUT5 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 11 | OUT6 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 12 | OUT7 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 13 | OUT8 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 14 | OUT9 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 15 | OUT10 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 16 | OUT11 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 17 | OUT12 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 18 | OUT13 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 19 | OUT14 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 20 | OUT15 | output | Open-drain constant-current sink output rated to 36V, intended to drive an LED cathode, with current set by RSET up to 55mA. |
| 21 | OE | input | Output-enable input; high forces OUT0-OUT15 to high impedance without changing the latch contents, and low lets the outputs follow the latches, making it usable as a PWM input. |
| 22 | DOUT | output | Serial-data output that shifts data out of the 16-bit shift register on CLK's rising edge, appearing 16 clock cycles after DIN; limited to ±10mA. |
| 23 | SET | passive | LED current-setting pin; connect to GND through resistor RSET (minimum 327.3Ω for 55mA, reference 360Ω for 50mA, maximum 5kΩ). |
| 24 | V+ | power_in | Positive supply voltage, specified from 3.0V to 5.5V; bypass V+ to GND with a 0.1µF ceramic capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | TSSOP-24 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 24 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | V+ | 3 | | 5.5 | V | | 2 |
| Output Current OUT_ | IOUT | 37 | 50 | 61 | mA | V+ = 3V to 5.5V, VOUT = 0.8V to 2.5V, RSET = 360Ω | 2 |
| Input Leakage Current DIN, CLK, LE, OE | IIH, IIL | -1 | | 1 | µA | | 2 |
| Output Low Voltage | VOL | | | 0.5 | V | ISINK = 4mA | 2 |
| Output Leakage Current OUT_ | ILEAK | | | 1 | µA | OE = V+ | 2 |
| Output Voltage | VOUT | | | 36 | V | | 2 |
| Hysteresis Voltage DIN, CLK, LE, OE | ΔVI | | 0.8 | | V | | 2 |
| Standby Current (Interface Idle, All Output Ports High Impedance) | I+ | | 5.7 | 8 | mA | RSET = 360Ω; all logic inputs at V+ or GND, DOUT unloaded | 2 |
| Standby Current (Interface Running, All Output Ports High Impedance) | I+ | | 6 | 8.5 | mA | RSET = 360Ω; fCLK = 5MHz, OE = V+, DIN and LE = V+ or GND, DOUT unloaded | 2 |
| Supply Current (Interface Idle, All Output Ports Active Low) | I+ | | 18 | 25 | mA | RSET = 360Ω; all logic inputs at V+ or GND, DOUT unloaded | 2 |
| CLK Clock Period | tCP | 52 | | | ns | | 4 |
| CLK Pulse-Width High | tCH | 24 | | | ns | | 4 |
| CLK Pulse-Width Low | tCL | 24 | | | ns | | 4 |
| DIN Setup Time | tDS | 4 | | | ns | | 4 |
| DIN Hold Time | tDH | 8 | | | ns | | 4 |
| DOUT Propagation Delay | tDO | 12 | | 50 | ns | | 4 |
| DOUT Rise and Fall Time | tDR, tDF | | | 12 | ns | CDOUT = 10pF, 20% to 80% | 4 |
| LE Pulse-Width High | tLW | 20 | | | ns | | 4 |
| LE Setup Time | tLS | 15 | | | ns | | 4 |
| LE Rising to OUT_ Rising Delay | tLRR | | | 120 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 |
| LE Rising to OUT_ Falling Delay | tLRF | | | 310 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 |
| CLK Rising to OUT_ Rising Delay | tCRR | | | 120 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 |
| CLK Rising to OUT_ Falling Delay | tCRF | | | 330 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 |
| OE Rising to OUT_ Rising Delay | tOEH | | | 120 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 |
| OE Falling to OUT_ Falling Delay | tOEL | | | 330 | ns | Note 3: 65Ω pullup from OUT_ to 5.5V | 4 |
| LED Output OUT_ Turn-On Fall Time | tf | | | 120 | ns | 80% to 20% (Note 3) | 4 |
| LED Output OUT_ Turn-Off Rise Time | tr | | | 120 | ns | 20% to 80% (Note 3) | 4 |
| Supply Voltage V+ (Absolute Maximum) | V+ | -0.3 | | 6 | V | Voltage with respect to GND | 2 |
| OUT_ Voltage (Absolute Maximum) | OUT_ | -0.3 | | 40 | V | Voltage with respect to GND | 2 |
| Logic Input Voltage DIN, CLK, LE, OE, SET (Absolute Maximum) | DIN, CLK, LE, OE, SET | -0.3 | | | V | Voltage with respect to GND | 2 |
| DOUT Current | DOUT | -10 | | 10 | mA | | 2 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Lead Temperature | TLEAD | | | 300 | °C | Soldering, 10s | 2 |
| Derating above +70°C, 24-Pin TSSOP | | | 12.2 | | mW/°C | Derate over +70°C | 2 |
| Junction-to-Ambient Thermal Resistance, 24-Pin TSSOP | θJA | | 82 | | °C/W | 24-Pin TSSOP | 9 |
## CAD (KiCad official)
- Symbol: `MAX6971AUG+T`
- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`
- 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files: `max6971aug-t-etched.step` / `max6971aug-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max6971aug-t.step` / `max6971aug-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6971.pdf) (12 pp, sha256 `5efc36f2b63fb9b0`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max6971aug-t-datasheet.pdf)