main
Ray Set visibility: public 6d2815c 5h ago
{
  "schema_version": 1,
  "type": "component",
  "slug": "max6804us29d3-t",
  "title": "MAX6804US29D3+T",
  "brief": "Maxim Integrated Monitors & Reset Circuits, SOT-143-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "max6804us29d3+t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MAX6804US29D3+T",
    "manufacturer": "Maxim Integrated",
    "package": "SOT-143-4",
    "pin_count": 4,
    "category": "Power Supply Chip",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/max6803-max6805.pdf",
    "parts": {
      "symbol": "max6804us29d3-t.kicad_sym",
      "footprint": "max6804us29d3-t.kicad_mod",
      "model_3d": "max6804us29d3-t-hero.glb",
      "model_3d_plain": "max6804us29d3-t-etched.glb",
      "model_3d_step": "max6804us29d3-t-etched.step",
      "model_3d_step_plain": "max6804us29d3-t.step",
      "lbr": "max6804us29d3-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C3684937",
      "digikey": "175-MAX6804US29D3+TTR-ND",
      "mouser": "700-MAX6804US29D3T"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T17:26:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "175-MAX6804US29D3+TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX6804US29D3T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the supervisor."
      },
      {
        "number": "2",
        "name": "RESET",
        "type": "output",
        "description": "Active-low reset output that is asserted while VCC is below the reset threshold or while MR is asserted, and remains asserted for the reset timeout period tRP after VCC rises above the threshold or MR is deasserted; on the MAX6804 this output is push/pull."
      },
      {
        "number": "3",
        "name": "MR",
        "type": "input",
        "description": "Manual-reset input where a logic low asserts reset and reset stays asserted while MR is low and for tRP after MR goes high; leave unconnected or connect to VCC if not used."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input; the MAX6804 is guaranteed to be in the correct reset state down to VCC = 0.7V and the supply range is specified up to 5.5V over 0°C to +125°C."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 8,
        "cost_usd": 0.044,
        "at": "2026-10-30T17:26:36"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/max6803-max6805.pdf",
        "pages": 8,
        "sha256": "a733017ca10ab840",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 4,
        "described": 4,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max6804us29d3-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b35b433c0dc71ac416a9c731e744d2e0610f82ebe97275830f0e17cdcbe44512",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max6804us29d3-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "641b9a1089c101950aa5d3b31a31bc218a918670e87a220516bee1ecb6d57c10",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Maxim Integrated",
      "Package": "SOT-143-4",
      "Category": "Power Supply Chip",
      "Pins": "4"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "a733017ca10ab8408c829bb8362f9811425534c9441298bb8aac130ae19da3d4",
      "rows": [
        {
          "name": "Supply Voltage Range (MAX6803/MAX6804)",
          "symbol": "VCC",
          "kind": "electrical",
          "unit": "V",
          "min": 0.7,
          "typ": null,
          "max": 5.5,
          "conditions": "TA = 0°C to +125°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage Range (MAX6803/MAX6804)",
          "symbol": "VCC",
          "kind": "electrical",
          "unit": "V",
          "min": 0.78,
          "typ": null,
          "max": 5.5,
          "conditions": "TA = -40°C to +125°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Supply Current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 4,
          "max": 10,
          "conditions": "No load, VCC = +3.0V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Supply Current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 5,
          "max": 12,
          "conditions": "No load, VCC = +5.0V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Reset Threshold tolerance",
          "symbol": "VTH",
          "kind": "tolerance",
          "unit": "%",
          "min": -1.8,
          "typ": null,
          "max": 1.8,
          "conditions": "TA = +25°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Reset Threshold tolerance",
          "symbol": "VTH",
          "kind": "tolerance",
          "unit": "%",
          "min": -3,
          "typ": null,
          "max": 3,
          "conditions": "TA = -40°C to +125°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Reset Threshold (Table 1 suffix 29, nominal 2.93 V)",
          "symbol": "VTH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.877,
          "typ": 2.93,
          "max": 2.983,
          "conditions": "TA = +25°C",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Reset Threshold (Table 1 suffix 29, nominal 2.93 V)",
          "symbol": "VTH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.842,
          "typ": 2.93,
          "max": 3.018,
          "conditions": "TA = -40°C to +125°C",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Reset Active Timeout Period (D3 = 100 ms min)",
          "symbol": "tRP",
          "kind": "timing",
          "unit": "ms",
          "min": 100,
          "typ": 150,
          "max": 200,
          "conditions": "MAX680_US_ _D3-T",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "MR Minimum Pulse Width",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": 1,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "VCC Falling Reset Delay",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": 30,
          "max": null,
          "conditions": "VCC falling at 10V/ms",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "MR Glitch Immunity",
          "symbol": "",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 50,
          "max": null,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "MR Reset Delay",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": 0.1,
          "max": null,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "MR Input Voltage LOW",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "× VCC",
          "min": null,
          "typ": null,
          "max": 0.3,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "MR Input Voltage HIGH",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "× VCC",
          "min": 0.7,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "MR Pullup Resistance",
          "symbol": "",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 12,
          "typ": 20,
          "max": 30,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "RESET Output Low Voltage (MAX6804)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "Reset asserted, ISINK = 50µA, VCC ≥ 1.0V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "RESET Output Low Voltage (MAX6804)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.3,
          "conditions": "Reset asserted, ISINK = 1.2mA, VCC ≥ 2.5V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "RESET Output High Voltage (MAX6804)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "× VCC",
          "min": 0.8,
          "typ": null,
          "max": null,
          "conditions": "Reset not asserted, ISOURCE = 500µA, VCC ≥ 3.0V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Absolute Max VCC",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "Terminal voltage with respect to GND",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Absolute Max Push/Pull RESET or RESET, MR",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Maximum printed as (VCC + 0.3V)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Absolute Max Input Current (VCC)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Absolute Max Output Current (RESET, RESET)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Operating Temperature Range",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Junction Temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature Range",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Lead Temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "Soldering, 10 s",
          "source_page": 2,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "max6804us29d3+t"
  ],
  "discovery_pitch": "MAX6804US29D3+T (Maxim Integrated) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max6804us29d3-t.kicad_sym",
    "max6804us29d3-t.kicad_mod",
    "max6804us29d3-t.glb",
    "max6804us29d3-t.step",
    "max6804us29d3-t.lbr",
    "docs/hero.png",
    "docs/max6804us29d3-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max6804us29d3-t-hero.glb",
    "max6804us29d3-t-hero.overlay.json",
    "max6804us29d3-t-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}