component
MAX6730AUTSD3+T
Public Made by Adomby adom
Maxim Integrated Monitors & Reset Circuits, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182
{
"slug": "max6730autsd3-t",
"version": "0.1.0",
"type": "component",
"description": "Maxim Integrated Monitors & Reset Circuits, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"max6730autsd3+t",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"max6730autsd3-t.kicad_sym",
"max6730autsd3-t.kicad_mod",
"max6730autsd3-t.glb",
"max6730autsd3-t.step",
"max6730autsd3-t.lbr",
"docs/hero.png",
"docs/max6730autsd3-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"max6730autsd3-t-hero.glb",
"max6730autsd3-t-hero.overlay.json",
"max6730autsd3-t-etched.glb"
],
"component": {
"mpn": "MAX6730AUTSD3+T",
"manufacturer": "Maxim Integrated",
"package": "SOT-23-6",
"pin_count": 6,
"category": "Power Management ICs",
"subcategory": "Monitors & Reset Circuits",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6730-MAX6735.pdf",
"parts": {
"symbol": "max6730autsd3-t.kicad_sym",
"footprint": "max6730autsd3-t.kicad_mod",
"model_3d": "max6730autsd3-t-hero.glb",
"model_3d_plain": "max6730autsd3-t-etched.glb",
"model_3d_step": "max6730autsd3-t-etched.step",
"model_3d_step_plain": "max6730autsd3-t.step",
"lbr": "max6730autsd3-t.lbr"
},
"distributor_links": {
"lcsc": "C1354720",
"digikey": "175-MAX6730AUTSD3+TTR-ND",
"mouser": "700-MAX6730AUTSD3T"
},
"distributor_check": {
"checked_at": "2026-10-30T22:26:03Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "175-MAX6730AUTSD3+TTR-ND",
"status": "found"
},
"mouser": {
"pn": "700-MAX6730AUTSD3T",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "RST",
"type": "output",
"description": "Active-low reset output that is open-drain on the MAX6730 and requires an external pullup resistor; it asserts low when VCC1 or VCC2 falls below its threshold, RSTIN falls below its reset threshold, or MR is driven low."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "3",
"name": "WDO",
"type": "output",
"description": "Active-low watchdog output that is open-drain on the MAX6730 and requires an external pullup resistor; it asserts low when no WDI transition occurs within the watchdog timeout period (tWD) or when an undervoltage condition exists on VCC1, VCC2, or RSTIN."
},
{
"number": "4",
"name": "MR",
"type": "input",
"description": "Active-low manual reset input that forces a reset when driven low and holds RST asserted for the reset timeout period after release; it has an internal 50kΩ pullup to VCC1, so it may be left open or connected to VCC1 if unused."
},
{
"number": "5",
"name": "WDI",
"type": "input",
"description": "Watchdog input that must see a rising or falling edge within the watchdog timeout period (35s min initial, 1.12s min normal) or WDO asserts low; leaving it unconnected does not disable the watchdog, and a 100kΩ (max) pulldown to ground is recommended if it is not driven by a logic-level source."
},
{
"number": "6",
"name": "VCC1",
"type": "power_in",
"description": "Primary supply-voltage input that powers the device when it is greater than VCC2, operates over 0.8V to 5.5V, and is the input to the primary reset threshold monitor."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN MAX6730AUTSD3+T does not match the datasheet ordering pattern MAX6730UT_D_+T. The datasheet ; Pinout is taken from the MAX6730 SOT23-6 pin configuration and pin description table (page 7). The M"
],
"pages_sent": 14,
"cost_usd": 0.0774,
"at": "2026-10-30T22:25:54"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6730-MAX6735.pdf",
"pages": 14,
"sha256": "45944d696334e9d9",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 6,
"described": 6,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "max6730autsd3-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "max6730autsd3-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "af7ff1c45b21186d5c31215f75d66ebbb3c395ebc92dce789373399a394e0cb3",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}