MAX6700UT+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IN1	input	Adjustable voltage monitor input with a typical 0.62V threshold set by an external resistor divider, guaranteed input current of ±0.4µA, and RESET asserts low when it falls below its threshold.
2	VCC	power_in	On the MAX6700UT this pin is the VCC power-supply input (not a monitored voltage), specified from 2.0V to 5.5V, and RESET remains valid while VCC is above 2V.
3	IN3	input	Adjustable voltage monitor input with a typical 0.62V threshold set by an external resistor divider and guaranteed input current of ±0.2µA; unused monitor inputs must not be grounded or left floating.
4	IN4	input	Adjustable voltage monitor input with a typical 0.62V threshold set by an external resistor divider and guaranteed input current of ±0.2µA; unused monitor inputs must not be grounded or left floating.
5	GND	power_in	Ground reference for the device.
6	RESET	output	Active-low open-drain reset output that goes low when any monitored input is below its threshold and stays low for the 5µs propagation delay after all inputs exceed their thresholds (MAX6700), with a weak 10µA internal pullup to VCC.

Key specifications

Parameter	Value
Manufacturer	Maxim Integrated
Package	SOT-23-6
Category	Power Management ICs
Pins	6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Operating Voltage Range (VCC, MAX6700)	VCC	2		5.5	V		2
Adjustable Threshold Voltage	VTH	0.611	0.62	0.629	V	IN_ decreasing	2
Supply Current (MAX6700)	ICC		35	65	µA	VCC = 5.5V	2
Input Current, IN1 adjustable input	IIN_			1	µA	VIN1 = 0 to 0.85V (for adjustable thresholds)	2
Input Current, IN3/IN4 adjustable inputs	IIN_			0.2	µA	VIN3, VIN4 = 0 to 0.85V (for adjustable thresholds)	2
RESET Output Low	VOL			0.3	V	VIN2, VCC = 5V, ISINK = 2mA	3
RESET Output Low	VOL			0.4	V	VIN2, VCC = 2.5V, ISINK = 1.2mA	3
Reset Threshold Hysteresis	VHYST		0.3		%VTH	IN_ increasing relative to IN_ decreasing	2
Reset Threshold Temperature Coefficient	TCVTH		60		ppm/°C		2
IN_ to Reset Delay	tRD		30		µs	VIN falling at 10mV/µs from VTH to (VTH - 50mV)	2
Propagation Delay (MAX6700 only)	tPD		5		µs	MAX6700 only	2
RESET Output High Source Current	IOH		10		µA	VIN2 ≥ 2.0V, RESET deasserted	3
Absolute Maximum Voltage on VCC, IN_, RESET to GND	VCC, IN_, RESET	-0.3		6	V	to GND	2
Continuous RESET Current	IRESET			20	mA		2
Operating Temperature Range	TA	-40		105	°C		2
Storage Temperature Range	TSTG	-65		150	°C		2
Junction Temperature	TJ			150	°C		2
Lead Temperature (soldering)	TLEAD			300	°C	soldering, 10s	2

CAD (KiCad official)

Symbol: MAX6700UT+T
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)
3D model files: max6700ut-t-etched.step / max6700ut-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6700ut-t.step / max6700ut-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Maxim Integrated datasheet (10 pp, sha256 73c4b80c4cbe240d, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

MAX6700UT+T

Verified MAX6700UT+T

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README