main
Ray
Publish 0.1.0
780979b
MAX6684ESA+T
Analog Devices Inc./Maxim Integrated · Brushed DC Motor Drivers · SO-8
MAX6684ESA+T from Analog Devices Inc./Maxim Integrated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | passive | Positive current-sensing terminal that connects to the low side of the fan, with SENSE-to-PGND rated to +28.0V and SENSE current limited to 1400mA. |
| 2 | FAIL | output | Active-low, open-drain fan-failure output with VFAIL output low voltage of 0.8V maximum at IFAIL = 3mA. |
| 3 | GND | power_in | Ground reference for the device, with voltages referenced to GND unless otherwise noted. |
| 4 | FC- | passive | Connects to a 0.1µF capacitor for most locked-rotor detection applications; to detect minimum speed, CF is selected per the Minimum Speed and Locked-Rotor Detection section. |
| 5 | FC+ | passive | Connects to a 0.1µF capacitor for most locked-rotor detection applications; to detect minimum speed, CF is selected per the Minimum Speed and Locked-Rotor Detection section. |
| 6 | VCC | power_in | Supply voltage input with a specified range of 3.0V to 5.5V, bypassed to GND with a 1µF capacitor. |
| 7 | OFF | input | Active-low fan-control input: driving OFF high or leaving it floating turns the fan on, and driving OFF low turns the fan off; VIH is 0.7 x VCC minimum and VIL is 0.3 x VCC maximum. |
| 8 | PGND | power_in | Power ground for the SENSE switch, to be connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SO-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 5.5 | V | 2 | ||
| Average SENSE (Fan) Current | 50 | 300 | mA | 2 | |||
| SENSE Current Shutdown | 600 | 1200 | mA | VCC = 3V | 2 | ||
| Fan-Current Fluctuation Frequency | 25 | 400 | Hz | No fault detected | 2 | ||
| Minimum Fan-Current Fluctuation Level | 15 | 35 | 60 | mAP-P | No fault detected | 2 | |
| VFAIL Output Delay After Fault | tFD | 0.3 | 1 | 2 | s | 2 | |
| SENSE-to-PGND Output Low Voltage | 0.3 | 0.66 | V | IFAN = 300mA | 2 | ||
| SENSE-to-PGND Output On-Resistance | RDSON | 1 | 2.2 | Ω | 2 | ||
| SENSE Leakage Current | 1 | 10 | µA | VSENSE = 26V | 2 | ||
| VFAIL Output Leakage Current | 0.1 | 1 | µA | VFAIL = 5.5V | 2 | ||
| OFF Input Current | -10 | 0 | 1 | µA | 2 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| VCC Absolute Maximum | VCC | -0.3 | 6 | V | Voltages referenced to GND | 2 | |
| OFF, FAIL Absolute Maximum | -0.3 | 6 | V | Voltages referenced to GND | 2 | ||
| PGND Absolute Maximum | -0.3 | 0.3 | V | Voltages referenced to GND | 2 | ||
| SENSE to PGND Absolute Maximum | -0.3 | 28 | V | 2 | |||
| Storage Temperature Range | TSTORE | -65 | 150 | °C | 2 | ||
| Junction Temperature | 150 | °C | 2 | ||||
| Soldering Temperature (vapor phase) | 215 | °C | 60s | 2 | |||
| Soldering Temperature (infrared) | 220 | °C | 15s | 2 | |||
| Supply Voltage (electrical operating range) | VCC | 3 | 3.3 | 5.5 | V | OFF = VCC, TA = -40°C to +85°C | 2 |
CAD (KiCad official)
- Symbol:
MAX6684ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
max6684esa-t-etched.step/max6684esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6684esa-t.step/max6684esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (7 pp, sha256
1547fd5126caf059, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX6684ESA+T
**Analog Devices Inc./Maxim Integrated** · Brushed DC Motor Drivers · SO-8
MAX6684ESA+T from Analog Devices Inc./Maxim Integrated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | passive | Positive current-sensing terminal that connects to the low side of the fan, with SENSE-to-PGND rated to +28.0V and SENSE current limited to 1400mA. |
| 2 | FAIL | output | Active-low, open-drain fan-failure output with VFAIL output low voltage of 0.8V maximum at IFAIL = 3mA. |
| 3 | GND | power_in | Ground reference for the device, with voltages referenced to GND unless otherwise noted. |
| 4 | FC- | passive | Connects to a 0.1µF capacitor for most locked-rotor detection applications; to detect minimum speed, CF is selected per the Minimum Speed and Locked-Rotor Detection section. |
| 5 | FC+ | passive | Connects to a 0.1µF capacitor for most locked-rotor detection applications; to detect minimum speed, CF is selected per the Minimum Speed and Locked-Rotor Detection section. |
| 6 | VCC | power_in | Supply voltage input with a specified range of 3.0V to 5.5V, bypassed to GND with a 1µF capacitor. |
| 7 | OFF | input | Active-low fan-control input: driving OFF high or leaving it floating turns the fan on, and driving OFF low turns the fan off; VIH is 0.7 x VCC minimum and VIL is 0.3 x VCC maximum. |
| 8 | PGND | power_in | Power ground for the SENSE switch, to be connected to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SO-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | | 5.5 | V | | 2 |
| Average SENSE (Fan) Current | | 50 | | 300 | mA | | 2 |
| SENSE Current Shutdown | | 600 | | 1200 | mA | VCC = 3V | 2 |
| Fan-Current Fluctuation Frequency | | 25 | | 400 | Hz | No fault detected | 2 |
| Minimum Fan-Current Fluctuation Level | | 15 | 35 | 60 | mAP-P | No fault detected | 2 |
| VFAIL Output Delay After Fault | tFD | 0.3 | 1 | 2 | s | | 2 |
| SENSE-to-PGND Output Low Voltage | | | 0.3 | 0.66 | V | IFAN = 300mA | 2 |
| SENSE-to-PGND Output On-Resistance | RDSON | | 1 | 2.2 | Ω | | 2 |
| SENSE Leakage Current | | | 1 | 10 | µA | VSENSE = 26V | 2 |
| VFAIL Output Leakage Current | | | 0.1 | 1 | µA | VFAIL = 5.5V | 2 |
| OFF Input Current | | -10 | 0 | 1 | µA | | 2 |
| Operating Temperature Range | TA | -40 | | 85 | °C | | 2 |
| VCC Absolute Maximum | VCC | -0.3 | | 6 | V | Voltages referenced to GND | 2 |
| OFF, FAIL Absolute Maximum | | -0.3 | | 6 | V | Voltages referenced to GND | 2 |
| PGND Absolute Maximum | | -0.3 | | 0.3 | V | Voltages referenced to GND | 2 |
| SENSE to PGND Absolute Maximum | | -0.3 | | 28 | V | | 2 |
| Storage Temperature Range | TSTORE | -65 | | 150 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Soldering Temperature (vapor phase) | | | | 215 | °C | 60s | 2 |
| Soldering Temperature (infrared) | | | | 220 | °C | 15s | 2 |
| Supply Voltage (electrical operating range) | VCC | 3 | 3.3 | 5.5 | V | OFF = VCC, TA = -40°C to +85°C | 2 |
## CAD (KiCad official)
- Symbol: `MAX6684ESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `max6684esa-t-etched.step` / `max6684esa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max6684esa-t.step` / `max6684esa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6684.pdf) (7 pp, sha256 `1547fd5126caf059`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max6684esa-t-datasheet.pdf)