main
Ray
Publish 0.1.0
456e460
MAX6658MSA+
Maxim Integrated · Temperature Sensors · SOIC-8
MAX6658MSA+ from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input, +3V to +5.5V; bypass to GND with a 0.1µF capacitor, with a 200Ω series resistor recommended but not required for noise filtering. |
| 2 | DXP | passive | Combined remote-diode current source and A/D positive input; must not be left unconnected, so connect to DXN if no remote diode is used, with a 2200pF capacitor between DXP and DXN. |
| 3 | DXN | passive | Combined remote-diode current sink and A/D negative input, internally biased to one diode drop above ground. |
| 4 | OVERT1 | output | Overtemperature active-low open-drain output, logic low only when temperature is above the software-programmed threshold. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | ALERT | output | SMBus alert (interrupt) active-low open-drain output, asserted when temperature exceeds user-set high or low limits and held until acknowledged by reading the Status register or responding to an Alert Response address. |
| 7 | SMBDATA | bidirectional | SMBus serial-data input/output, open-drain. |
| 8 | SMBCLK | input | SMBus serial-clock input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | θJ-A for the 8-pin SO package is about +170°C/W, so assuming no copper PC board heat sinking, the resulting temperature rise is: | 7 |
CAD (KiCad official)
- Symbol:
MAX6658MSA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max6658msa-etched.step/max6658msa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6658msa.step/max6658msa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (16 pp, sha256
2a270b2227865b51, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX6658MSA+
**Maxim Integrated** · Temperature Sensors · SOIC-8
MAX6658MSA+ from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input, +3V to +5.5V; bypass to GND with a 0.1µF capacitor, with a 200Ω series resistor recommended but not required for noise filtering. |
| 2 | DXP | passive | Combined remote-diode current source and A/D positive input; must not be left unconnected, so connect to DXN if no remote diode is used, with a 2200pF capacitor between DXP and DXN. |
| 3 | DXN | passive | Combined remote-diode current sink and A/D negative input, internally biased to one diode drop above ground. |
| 4 | OVERT1 | output | Overtemperature active-low open-drain output, logic low only when temperature is above the software-programmed threshold. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | ALERT | output | SMBus alert (interrupt) active-low open-drain output, asserted when temperature exceeds user-set high or low limits and held until acknowledged by reading the Status register or responding to an Alert Response address. |
| 7 | SMBDATA | bidirectional | SMBus serial-data input/output, open-drain. |
| 8 | SMBCLK | input | SMBus serial-clock input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | θJ-A for the 8-pin SO package is about +170°C/W, so assuming no copper PC board heat sinking, the resulting temperature rise is: | 7 |
## CAD (KiCad official)
- Symbol: `MAX6658MSA+`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `max6658msa-etched.step` / `max6658msa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max6658msa.step` / `max6658msa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max6657-max6659.pdf) (16 pp, sha256 `2a270b2227865b51`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max6658msa-datasheet.pdf)