main
Ray
Publish 0.1.0
b342190
MAX6639AEE+
Analog Devices Inc./Maxim Integrated · Temperature Sensors · QSOP-16
MAX6639AEE+ from Analog Devices Inc./Maxim Integrated, in a QSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PWM1 | output | Open-drain output driving the gate or base of a fan power transistor; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of the MAX6639's supply voltage. |
| 2 | TACH1 | input | Tachometer input connected to the fan tachometer output; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of VCC. |
| 3 | PWM2 | output | Open-drain output driving the gate or base of a second fan power transistor; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of VCC. |
| 4 | TACH2 | input | Tachometer input connected to the second fan tachometer output; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of VCC. |
| 5 | FANFAIL | output | Active-low open-drain fan-failure output that is open circuit when VCC = 0. |
| 6 | THERM | output | Active-low open-drain thermal alarm output, typically used for clock throttling, that is open circuit when VCC = 0. |
| 7 | OT | output | Active-low open-drain overtemperature output that can be pulled up to 5.5V regardless of VCC and is open circuit when VCC = 0. |
| 8 | VCC | power_in | Power-supply input, 3.3V nominal within the 3.0V to 3.6V operating range; bypass to GND with a 0.1µF capacitor. |
| 9 | DXP1 | passive | Combined current source and A/D positive input for the remote diode anode; must not be left unconnected (connect to DXN if no remote diode is used) and needs a 2200pF capacitor between DXP and DXN for noise filtering. |
| 10 | GND | power_in | Ground reference; connect to a clean ground. |
| 11 | DXN | passive | Remote diode current sink input; connect to the cathode of the remote-diode-connected transistor. |
| 12 | DXP2 | passive | Combined current source and A/D positive input for the second remote diode anode; must not be left unconnected (connect to DXN if no remote diode is used) and needs a 2200pF capacitor between DXP and DXN for noise filtering. |
| 13 | ADD | input | Address input that sets the device slave address; connect to GND, connect to VCC, or leave unconnected to select one of three unique addresses. |
| 14 | ALERT | output | Active-low open-drain SMBus alert output. |
| 15 | SDA | bidirectional | SMBus serial-data input/output, open drain; can be pulled up to 5.5V regardless of VCC and is open circuit when VCC = 0. |
| 16 | SCL | input | SMBus serial-clock input that can be pulled up to 5.5V regardless of VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | QSOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Absolute maximum VCC to GND | VCC | -0.3 | 4 | V | VCC to GND | 2 | |
| PWM1, PWM2, TACH1, TACH2 to GND | -0.3 | 13.5 | V | to GND | 2 | ||
| DXP1 and DXP2 to GND | -0.3 | V | max +(VCC + 0.3V) as printed | 2 | |||
| DXN to GND | -0.3 | 0.8 | V | to GND | 2 | ||
| SCL, SDA, THERM, OT, FANFAIL, ADD, ALERT to GND | -0.3 | 6 | V | to GND | 2 | ||
| SDA, OT, THERM, ALERT, FANFAIL, PWM1, PWM2 current | -1 | 50 | mA | 2 | |||
| DXN current | -1 | 1 | mA | 2 | |||
| Continuous power dissipation 16-pin QSOP | 667 | mW | TA = +70°C, derated 8.3mW/°C above +70°C | 2 | |||
| Operating temperature range | -40 | 125 | °C | 2 | |||
| Junction temperature | 150 | °C | 2 | ||||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature (soldering, 10s) | 300 | °C | soldering, 10s | 2 | |||
| Soldering temperature (reflow) | 260 | °C | reflow | 2 | |||
| Operating supply voltage range | VCC | 3 | 3.6 | V | 2 | ||
| Standby current | 3 | 10 | µA | SMB static, sleep mode | 2 | ||
| Operating current | 0.5 | 1 | mA | Interface inactive, ADC active | 2 | ||
| External temperature error | -1 | 1 | °C | VCC = +3.3V, +60°C ≤ TA ≤ +100°C and +60°C ≤ TR ≤ +100°C | 2 | ||
| External temperature error | -2.5 | 2.5 | °C | VCC = +3.3V, +40°C ≤ TA ≤ +100°C and 0°C ≤ TR ≤ +145°C | 2 | ||
| External temperature error | -3.8 | 3.8 | °C | VCC = +3.3V, 0°C ≤ TR ≤ +145°C; MAX6639AEE n = 1.008 | 2 | ||
| Internal temperature error | -2 | 2 | °C | VCC = +3.3V, +25°C ≤ TA ≤ +100°C | 2 | ||
| Internal temperature error (MAX6639AEE, MAX6639ATE) | -4 | 4 | °C | VCC = +3.3V, 0°C ≤ TA ≤ +125°C | 2 | ||
| Supply sensitivity of temperature measurement | -0.2 | 0.2 | °C/V | 2 | |||
| Conversion-rate timing error | -10 | 10 | % | 2 | |||
| PWM frequency error | -10 | 10 | % | 2 | |||
| Tachometer accuracy | -3 | 3 | % | TA = +60°C to +100°C | 2 | ||
| Remote-diode sourcing current high level | 70 | 100 | 130 | µA | High level | 2 | |
| Remote-diode sourcing current low level | 7 | 10 | 13 | µA | Low level | 2 | |
| Output low voltage (sink current) ALERT, FANFAIL, THERM, OT, SDA | VOL | 0.4 | V | ISINK = 6mA | 3 | ||
| Output low voltage PWM1, PWM2 | VOL | 0.4 | V | PWM1, PWM2, ISINK = 4mA | 3 | ||
| Output high leakage current | IOH | 1 | µA | OT, ALERT, FANFAIL, THERM, SDA, PWM1, PWM2 | 3 | ||
| Logic-low input voltage (SDA, SCL, THERM, TACH1, TACH2) | VIL | 0.8 | V | 3 | |||
| Logic-high input voltage (SDA, SCL, THERM, TACH1, TACH2) | VIH | 2.1 | V | VCC = 3.3V | 3 | ||
| Input leakage current (SDA, SCL, THERM, TACH1, TACH2) | 1 | µA | VIN = VCC or GND | 3 | |||
| Serial clock frequency | fSCL | 10 | 100 | kHz | Note 3 | 3 | |
| Clock low period | tLOW | 4 | µs | 10% to 10% | 3 | ||
| Clock high period | tHIGH | 4.7 | µs | 90% to 90% | 3 | ||
| Bus free time between STOP and START | tBUF | 4.7 | µs | 3 | |||
| SMBus START condition setup time | tSU:STA | 4.7 | µs | 90% of SMBCLK to 90% of SMBDATA | 3 | ||
| START condition hold time | tHD:STO | 4 | µs | 10% of SDA to 10% of SCL | 3 | ||
| STOP condition setup time | tSU:STO | 4 | µs | 90% of SCL to 10% of SDA | 3 | ||
| Data setup time | tSU:DAT | 250 | ns | 10% of SDA to 10% of SCL | 3 | ||
| Data hold time | tHD:DAT | 300 | ns | 10% of SCL to 10% of SDA; Note 4 | 3 | ||
| SMBus fall time | tF | 300 | ns | 3 | |||
| SMBus rise time | tR | 1000 | ns | 3 | |||
| SMBus timeout | tTIMEOUT | 58 | 74 | 90 | ms | 3 |
CAD (KiCad official)
- Symbol:
MAX6639AEE+ - Footprint:
Package_SO:QSOP-16_3.9x4.9mm_P0.635mm - 3D model: QSOP-16 (KiCad packages3D, STEP)
- 3D model files:
max6639aee-etched.step/max6639aee-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6639aee.step/max6639aee.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (22 pp, sha256
bf52604981deae9c, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX6639AEE+
**Analog Devices Inc./Maxim Integrated** · Temperature Sensors · QSOP-16
MAX6639AEE+ from Analog Devices Inc./Maxim Integrated, in a QSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PWM1 | output | Open-drain output driving the gate or base of a fan power transistor; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of the MAX6639's supply voltage. |
| 2 | TACH1 | input | Tachometer input connected to the fan tachometer output; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of VCC. |
| 3 | PWM2 | output | Open-drain output driving the gate or base of a second fan power transistor; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of VCC. |
| 4 | TACH2 | input | Tachometer input connected to the second fan tachometer output; requires a pullup resistor that may be tied to a supply up to 13.5V regardless of VCC. |
| 5 | FANFAIL | output | Active-low open-drain fan-failure output that is open circuit when VCC = 0. |
| 6 | THERM | output | Active-low open-drain thermal alarm output, typically used for clock throttling, that is open circuit when VCC = 0. |
| 7 | OT | output | Active-low open-drain overtemperature output that can be pulled up to 5.5V regardless of VCC and is open circuit when VCC = 0. |
| 8 | VCC | power_in | Power-supply input, 3.3V nominal within the 3.0V to 3.6V operating range; bypass to GND with a 0.1µF capacitor. |
| 9 | DXP1 | passive | Combined current source and A/D positive input for the remote diode anode; must not be left unconnected (connect to DXN if no remote diode is used) and needs a 2200pF capacitor between DXP and DXN for noise filtering. |
| 10 | GND | power_in | Ground reference; connect to a clean ground. |
| 11 | DXN | passive | Remote diode current sink input; connect to the cathode of the remote-diode-connected transistor. |
| 12 | DXP2 | passive | Combined current source and A/D positive input for the second remote diode anode; must not be left unconnected (connect to DXN if no remote diode is used) and needs a 2200pF capacitor between DXP and DXN for noise filtering. |
| 13 | ADD | input | Address input that sets the device slave address; connect to GND, connect to VCC, or leave unconnected to select one of three unique addresses. |
| 14 | ALERT | output | Active-low open-drain SMBus alert output. |
| 15 | SDA | bidirectional | SMBus serial-data input/output, open drain; can be pulled up to 5.5V regardless of VCC and is open circuit when VCC = 0. |
| 16 | SCL | input | SMBus serial-clock input that can be pulled up to 5.5V regardless of VCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | QSOP-16 |
| Category | Sensors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Absolute maximum VCC to GND | VCC | -0.3 | | 4 | V | VCC to GND | 2 |
| PWM1, PWM2, TACH1, TACH2 to GND | | -0.3 | | 13.5 | V | to GND | 2 |
| DXP1 and DXP2 to GND | | -0.3 | | | V | max +(VCC + 0.3V) as printed | 2 |
| DXN to GND | | -0.3 | | 0.8 | V | to GND | 2 |
| SCL, SDA, THERM, OT, FANFAIL, ADD, ALERT to GND | | -0.3 | | 6 | V | to GND | 2 |
| SDA, OT, THERM, ALERT, FANFAIL, PWM1, PWM2 current | | -1 | | 50 | mA | | 2 |
| DXN current | | -1 | | 1 | mA | | 2 |
| Continuous power dissipation 16-pin QSOP | | | | 667 | mW | TA = +70°C, derated 8.3mW/°C above +70°C | 2 |
| Operating temperature range | | -40 | | 125 | °C | | 2 |
| Junction temperature | | | | 150 | °C | | 2 |
| Storage temperature range | | -65 | | 150 | °C | | 2 |
| Lead temperature (soldering, 10s) | | | | 300 | °C | soldering, 10s | 2 |
| Soldering temperature (reflow) | | | | 260 | °C | reflow | 2 |
| Operating supply voltage range | VCC | 3 | | 3.6 | V | | 2 |
| Standby current | | | 3 | 10 | µA | SMB static, sleep mode | 2 |
| Operating current | | | 0.5 | 1 | mA | Interface inactive, ADC active | 2 |
| External temperature error | | -1 | | 1 | °C | VCC = +3.3V, +60°C ≤ TA ≤ +100°C and +60°C ≤ TR ≤ +100°C | 2 |
| External temperature error | | -2.5 | | 2.5 | °C | VCC = +3.3V, +40°C ≤ TA ≤ +100°C and 0°C ≤ TR ≤ +145°C | 2 |
| External temperature error | | -3.8 | | 3.8 | °C | VCC = +3.3V, 0°C ≤ TR ≤ +145°C; MAX6639AEE n = 1.008 | 2 |
| Internal temperature error | | -2 | | 2 | °C | VCC = +3.3V, +25°C ≤ TA ≤ +100°C | 2 |
| Internal temperature error (MAX6639AEE, MAX6639ATE) | | -4 | | 4 | °C | VCC = +3.3V, 0°C ≤ TA ≤ +125°C | 2 |
| Supply sensitivity of temperature measurement | | -0.2 | | 0.2 | °C/V | | 2 |
| Conversion-rate timing error | | -10 | | 10 | % | | 2 |
| PWM frequency error | | -10 | | 10 | % | | 2 |
| Tachometer accuracy | | -3 | | 3 | % | TA = +60°C to +100°C | 2 |
| Remote-diode sourcing current high level | | 70 | 100 | 130 | µA | High level | 2 |
| Remote-diode sourcing current low level | | 7 | 10 | 13 | µA | Low level | 2 |
| Output low voltage (sink current) ALERT, FANFAIL, THERM, OT, SDA | VOL | | | 0.4 | V | ISINK = 6mA | 3 |
| Output low voltage PWM1, PWM2 | VOL | | | 0.4 | V | PWM1, PWM2, ISINK = 4mA | 3 |
| Output high leakage current | IOH | | | 1 | µA | OT, ALERT, FANFAIL, THERM, SDA, PWM1, PWM2 | 3 |
| Logic-low input voltage (SDA, SCL, THERM, TACH1, TACH2) | VIL | | | 0.8 | V | | 3 |
| Logic-high input voltage (SDA, SCL, THERM, TACH1, TACH2) | VIH | 2.1 | | | V | VCC = 3.3V | 3 |
| Input leakage current (SDA, SCL, THERM, TACH1, TACH2) | | | | 1 | µA | VIN = VCC or GND | 3 |
| Serial clock frequency | fSCL | 10 | | 100 | kHz | Note 3 | 3 |
| Clock low period | tLOW | 4 | | | µs | 10% to 10% | 3 |
| Clock high period | tHIGH | 4.7 | | | µs | 90% to 90% | 3 |
| Bus free time between STOP and START | tBUF | 4.7 | | | µs | | 3 |
| SMBus START condition setup time | tSU:STA | 4.7 | | | µs | 90% of SMBCLK to 90% of SMBDATA | 3 |
| START condition hold time | tHD:STO | 4 | | | µs | 10% of SDA to 10% of SCL | 3 |
| STOP condition setup time | tSU:STO | 4 | | | µs | 90% of SCL to 10% of SDA | 3 |
| Data setup time | tSU:DAT | 250 | | | ns | 10% of SDA to 10% of SCL | 3 |
| Data hold time | tHD:DAT | 300 | | | ns | 10% of SCL to 10% of SDA; Note 4 | 3 |
| SMBus fall time | tF | | | 300 | ns | | 3 |
| SMBus rise time | tR | | | 1000 | ns | | 3 |
| SMBus timeout | tTIMEOUT | 58 | 74 | 90 | ms | | 3 |
## CAD (KiCad official)
- Symbol: `MAX6639AEE+`
- Footprint: `Package_SO:QSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: QSOP-16 (KiCad packages3D, STEP)
- 3D model files: `max6639aee-etched.step` / `max6639aee-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max6639aee.step` / `max6639aee.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6639-MAX6639F.pdf) (22 pp, sha256 `bf52604981deae9c`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max6639aee-datasheet.pdf)