3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMAX6635MSA+
Maxim Integrated · Temperature Sensors · SOIC-8
MAX6635MSA+ from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | Serial data input/output for the SMBus/I2C-compatible interface, open drain. |
| 2 | SCL | input | Serial clock input for the SMBus/I2C-compatible interface. |
| 3 | OVERT | output | Open-drain overtemperature output that is always in comparator mode and asserts when temperature exceeds the TMAX register value. |
| 4 | GND | power_in | Ground. |
| 5 | ALERT | output | Open-drain ALERT output with programmable polarity and comparator or interrupt mode, triggered by THIGH and TLOW limits. |
| 6 | A1 | input | Address pin, connected to GND or VCC to select the device's SMBus/I2C address. |
| 7 | A0 | input | Address pin, connected to GND or VCC to select the device's SMBus/I2C address. |
| 8 | VCC | power_in | Supply voltage input, +3.0V to +5.5V, bypassed to GND with a 0.1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Range | VCC | 3 | 5.5 | V | 2 | ||
| Accuracy 0°C to +50°C | -1 | 0.4 | 1 | °C | 0°C ≤ TA ≤ +50°C, VCC = +3.3V | 2 | |
| Accuracy -20°C to +85°C | -1.5 | 0.6 | 1.5 | °C | -20°C ≤ TA ≤ +85°C, VCC = +3.3V | 2 | |
| Accuracy -40°C to +125°C | -2.5 | 1 | 2.5 | °C | -40°C ≤ TA ≤ 125°C, VCC = +3.3V | 2 | |
| Accuracy at -55°C | -2.8 | 1.5 | 2.8 | °C | TA = -55°C, VCC = +3.3V | 2 | |
| Accuracy at +150°C | 2.5 | °C | TA = +150°C, VCC = +3.3V | 2 | |||
| Power-Supply Rejection Ratio | PSRR | 0.2 | 0.5 | °C/V | 2 | ||
| POR Threshold Hysteresis | 90 | mV | 2 | ||||
| Supply Current in Shutdown | 12 | 20 | µA | VCC = +3.0V, SMBus inactive | 2 | ||
| Supply Current in Shutdown | 20 | 30 | µA | VCC = +5.5V, SMBus inactive | 2 | ||
| Average Operating Current | 150 | µA | VCC = +3.0V, SMBus inactive | 2 | |||
| Average Operating Current | 200 | µA | VCC = +5.5V, SMBus inactive | 2 | |||
| Peak Operating Current | 270 | 350 | µA | VCC = +3.0V, SMBus inactive | 2 | ||
| Peak Operating Current | 350 | 700 | µA | VCC = +5.5V, SMBus inactive | 2 | ||
| Conversion Rate | 1.4 | 2 | 2.4 | Hz | 2 | ||
| Logic Input Low Voltage | VIL | 0.65 | V | VCC = +3.0V to +5.5V | 2 | ||
| Logic Input High Voltage | VIH | 2.2 | V | VCC = +3V | 2 | ||
| Logic Input High Voltage | VIH | 2.4 | V | VCC = +5.5V | 2 | ||
| Input Leakage Current | II_LEAK | -1 | 1 | µA | VIN = GND or VCC | 2 | |
| Output Low Sink Current | IOL | 6 | mA | VOL = 0.6V (SMBDATA, ALERT, OVERT) | 2 | ||
| Output Leakage Current | IO_LEAK | -1 | 1 | µA | ALERT, OVERT at VCC | 2 | |
| Input Capacitance | CIN | 5 | pF | 2 | |||
| Serial Clock Frequency | fSCL | 10 | 100 | kHz | 3 | ||
| Bus Free Time Between STOP and START Condition | tBUF | 4.7 | µs | 3 | |||
| START Condition Setup Time | 4.7 | µs | 3 | ||||
| Repeat START Condition Setup Time | tSU:STA | 4.7 | µs | 90% to 90% | 3 | ||
| START Condition Hold Time | tHD:STA | 4 | µs | 10% of SMBDATA to 90% of SMBCLK | 3 | ||
| STOP Condition Setup Time | tSU:STO | 4 | µs | 90% of SMBCLK to 10% of SMBDATA | 3 | ||
| Data Setup Time | tSU:DAT | 250 | ns | 90% of SMBDATA to 10% of SMBCLK | 3 | ||
| Data Hold Time | tHD:DAT | 300 | ns | Note 4 | 3 | ||
| Receive SCL/SDA Rise Time | tR | 1 | µs | 3 | |||
| SCL/SDA Fall Time | tF | 300 | ns | Note 4 | 3 | ||
| Clock Low Period | tLOW | 4.7 | µs | 10% to 10% | 3 | ||
| Clock High Period | tHIGH | 4 | µs | 90% to 90% | 3 | ||
| SMBus Timeout | 25 | 48 | ms | 3 | |||
| Supply Voltage (VCC, SDA, SCL) | -0.3 | 6 | V | VCC, SDA, SCL | 2 | ||
| SDA, ALERT, OVERT Current | -1 | 50 | mA | 2 | |||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Operating Temperature Range | -55 | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | 2 | ||||
| Thermal Resistance Junction to Ambient | θJA | 170 | °C/W | 8-pin SO package | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | plastic packages primarily through the leads. Short, wide copper traces leading to the temperature monitor ensure | 12 |
CAD (KiCad official)
- Symbol:
MAX6635MSA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max6635msa-etched.step/max6635msa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6635msa.step/max6635msa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (16 pp, sha256
f5bdd44a15b9a26d, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).