component
MAX660ESA+
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Charge Pumps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX660ESA+
Analog Devices Inc Maxim Integrated · Charge Pumps · SOIC-8
MAX660ESA+ from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FC | input | Frequency control input: open selects 10kHz typ oscillator and tying to V+ selects 80kHz typ (40kHz min), with no effect when OSC is driven externally. |
| 2 | CAP+ | passive | Positive terminal of the charge-pump capacitor C1; the signal at CAP+ and CAP- runs at one-half the oscillator frequency. |
| 3 | GND | power_in | Power-supply ground input; the absolute maximum supply rating is V+ to GND = +6V. |
| 4 | CAP- | passive | Negative terminal of the charge-pump capacitor C1. |
| 5 | OUT | power_out | Negative voltage output in inverter mode (positive doubled output in doubler mode), rated for 100mA; it may be shorted to GND for 1sec but must not be shorted to V+, and continuous output current is limited to 120mA absolute maximum. |
| 6 | LV | input | Low-voltage operation input: tie to GND when input is below 3V, may be GND or open above 3V in inverter mode, must be tied to GND when overdriving OSC, and must be tied to OUT in doubler mode. |
| 7 | OSC | input | Oscillator control input with an internal 15pF capacitor; an external capacitor slows the oscillator and an external clock may overdrive it within 100mV of V+ and GND in inverter mode, but it must not be overdriven in doubler mode. |
| 8 | V+ | power_in | Positive power-supply input, specified at 1.5V to 5.5V operating supply voltage, with an absolute maximum of +6V to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage-Conversion Efficiency | 99 | 99.96 | % | No load | 2 | ||
| Operating Supply Voltage (doubler) | 2.5 | 5.5 | V | Doubler, LV = OUT | 2 | ||
| Operating Supply Voltage (inverter) | 1.5 | 5.5 | V | Inverter, LV = GND | 2 | ||
| Operating Supply Voltage (inverter) | 3 | 5.5 | V | Inverter, LV = open | 2 | ||
| Output Resistance | 6.5 | 10 | Ω | IL = 100mA | 2 | ||
| Oscillator Frequency | 40 | 80 | kHz | FC = V+ | 2 | ||
| Supply Current | 0.12 | 0.5 | mA | No load | 2 | ||
| Power Efficiency | 88 | % | IL = 100mA to GND | 2 | |||
| Supply Voltage (V+ to GND, or GND to OUT) | 6 | V | V+ to GND, or GND to OUT | 2 | |||
| Output Short-Circuit Duration to GND | 1 | s | Note 1 | 2 | |||
| Operating Temperature Range (MAX660E_ _) | -40 | 85 | °C | 2 | |||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | soldering, 10 sec | 2 |
CAD (KiCad official)
- Symbol:
MAX660ESA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max660esa-etched.step/max660esa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max660esa.step/max660esa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (12 pp, sha256
38810e927562df8c, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).