component
MAX660CSA+T-TUDI
Public Made by Adomby adom
Tudi Charge Pumps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# MAX660CSA+T-TUDI++**Tudi** · Charge Pumps · SOP-8++MAX660CSA+T-TUDI from Tudi, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FC | input | Frequency Control for internal oscillator: FC = open sets fOSC = 10kHz typ; FC = V+ sets fOSC = 80kHz typ (40kHz min); FC has no effect when OSC pin is driven externally. |+| 2 | CAP+ | passive | Charge-pump flying capacitor positive terminal; connect external capacitor C1 (1µF to 150µF) between CAP+ and CAP-; C1 ESR has approximately 4× the voltage-loss impact of C2 ESR. |+| 3 | GND | power_in | Power-supply ground input; reference potential for the device. |+| 4 | CAP- | passive | Charge-pump flying capacitor negative terminal; connect external capacitor C1 (1µF to 150µF) between CAP+ and CAP-. |+| 5 | OUT | power_out | Output pin: negative voltage output in inverter mode (VOUT = −VIN) or doubled positive voltage output in doubler mode (VOUT = 2×VIN); 100mA continuous output current, 6.5Ω typ output impedance; OUT must not be shorted to V+. |+| 6 | LV | input | Low-Voltage Operation Input: tie to GND when V+ < 3V for best low-voltage performance; may be GND or left open when V+ > 3V; must be tied to GND when overdriving OSC; must be tied to OUT in voltage-doubling mode. |+| 7 | OSC | input | Oscillator Control Input; connected internally to a 15pF capacitor; add external capacitor between OSC and GND to reduce oscillator frequency; may be overdriven by an external CMOS clock swinging within 100mV of V+ and GND; charge-pump frequency is one-half the oscillator frequency. |+| 8 | V+ | power_in | Power-supply positive voltage input; operating range 1.5V to 5.5V (inverter) or 2.5V to 5.5V (doubler); absolute maximum V+ to GND = 6V; substrate connected to V+. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Tudi |+| Package | SOP-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `MAX660CSA+T-TUDI`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)+- 3D model files: `max660csa-t-tudi-etched.step` / `max660csa-t-tudi-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max660csa-t-tudi.step` / `max660csa-t-tudi.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Tudi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604436247541149696) (12 pp, sha256 `b36e77b34f132ee1`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max660csa-t-tudi-datasheet.pdf)
page.jsonadded+141@@ -0,0 +1,141 @@+{+ "slug": "max660csa-t-tudi",+ "version": "0.1.0",+ "type": "component",+ "description": "Tudi Charge Pumps, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "max660csa+t-tudi",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max660csa-t-tudi.kicad_sym",+ "max660csa-t-tudi.kicad_mod",+ "max660csa-t-tudi.glb",+ "max660csa-t-tudi.step",+ "max660csa-t-tudi.lbr",+ "docs/hero.png",+ "docs/max660csa-t-tudi-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "MAX660CSA+T-TUDI",+ "manufacturer": "Tudi",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "Charge Pumps",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604436247541149696",+ "parts": {+ "symbol": "max660csa-t-tudi.kicad_sym",+ "footprint": "max660csa-t-tudi.kicad_mod",+ "model_3d": "max660csa-t-tudi-etched.glb",+ "model_3d_plain": "max660csa-t-tudi.glb",+ "model_3d_step": "max660csa-t-tudi-etched.step",+ "model_3d_step_plain": "max660csa-t-tudi.step",+ "lbr": "max660csa-t-tudi.lbr"+ },+ "distributor_links": {+ "lcsc": "C42372940"+ },+ "pins": [+ {+ "number": "1",+ "name": "FC",+ "type": "input",+ "description": "Frequency Control for internal oscillator: FC = open sets fOSC = 10kHz typ; FC = V+ sets fOSC = 80kHz typ (40kHz min); FC has no effect when OSC pin is driven externally."+ },+ {+ "number": "2",+ "name": "CAP+",+ "type": "passive",+ "description": "Charge-pump flying capacitor positive terminal; connect external capacitor C1 (1µF to 150µF) between CAP+ and CAP-; C1 ESR has approximately 4× the voltage-loss impact of C2 ESR."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Power-supply ground input; reference potential for the device."+ },+ {+ "number": "4",+ "name": "CAP-",+ "type": "passive",+ "description": "Charge-pump flying capacitor negative terminal; connect external capacitor C1 (1µF to 150µF) between CAP+ and CAP-."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Output pin: negative voltage output in inverter mode (VOUT = −VIN) or doubled positive voltage output in doubler mode (VOUT = 2×VIN); 100mA continuous output current, 6.5Ω typ output impedance; OUT must not be shorted to V+."+ },+ {+ "number": "6",+ "name": "LV",+ "type": "input",+ "description": "Low-Voltage Operation Input: tie to GND when V+ < 3V for best low-voltage performance; may be GND or left open when V+ > 3V; must be tied to GND when overdriving OSC; must be tied to OUT in voltage-doubling mode."+ },+ {+ "number": "7",+ "name": "OSC",+ "type": "input",+ "description": "Oscillator Control Input; connected internally to a 15pF capacitor; add external capacitor between OSC and GND to reduce oscillator frequency; may be overdriven by an external CMOS clock swinging within 100mV of V+ and GND; charge-pump frequency is one-half the oscillator frequency."+ },+ {+ "number": "8",+ "name": "V+",+ "type": "power_in",+ "description": "Power-supply positive voltage input; operating range 1.5V to 5.5V (inverter) or 2.5V to 5.5V (doubler); absolute maximum V+ to GND = 6V; substrate connected to V+."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 12,+ "cost_usd": 0.3159,+ "at": "2026-09-22T02:27:46"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604436247541149696",+ "pages": 12,+ "sha256": "b36e77b34f132ee1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}