MAX6355LSUT+T

{
  "slug": "max6355lsut-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Maxim Integrated Monitors & Reset Circuits, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "max6355lsut+t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max6355lsut-t.kicad_sym",
    "max6355lsut-t.kicad_mod",
    "max6355lsut-t.glb",
    "max6355lsut-t.step",
    "max6355lsut-t.lbr",
    "docs/hero.png",
    "docs/max6355lsut-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max6355lsut-t-hero.glb",
    "max6355lsut-t-hero.overlay.json",
    "max6355lsut-t-etched.glb"
  ],
  "component": {
    "mpn": "MAX6355LSUT+T",
    "manufacturer": "Maxim Integrated",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management ICs",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6351-MAX6360.pdf",
    "parts": {
      "symbol": "max6355lsut-t.kicad_sym",
      "footprint": "max6355lsut-t.kicad_mod",
      "model_3d": "max6355lsut-t-hero.glb",
      "model_3d_plain": "max6355lsut-t-etched.glb",
      "model_3d_step": "max6355lsut-t-etched.step",
      "model_3d_step_plain": "max6355lsut-t.step",
      "lbr": "max6355lsut-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2066142",
      "digikey": "MAX6355LSUT+TTR-ND",
      "mouser": "700-MAX6355LSUTT"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T23:51:37Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MAX6355LSUT+TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX6355LSUTT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RST",
        "type": "output",
        "description": "Active-low open-drain reset output for the MAX6355, which asserts when VCC1 or VCC2 drops below its trip point."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "3",
        "name": "MR",
        "type": "input",
        "description": "Manual-reset input that is pulled low to force a reset, with RST held active while MR is low and for the timeout period after MR goes high; leave unconnected or connect to VCC1 if unused, and VMR must not exceed VCC1."
      },
      {
        "number": "4",
        "name": "VCC2",
        "type": "power_in",
        "description": "Supply input that powers the device when it is above VCC1 and monitors its own voltage."
      },
      {
        "number": "5",
        "name": "RSTIN",
        "type": "input",
        "description": "Undervoltage-reset comparator input that asserts reset when the monitored voltage falls below 1.22V, set by an external resistive divider; connect to VCC1 if unused, and VRSTIN must not exceed VCC1."
      },
      {
        "number": "6",
        "name": "VCC1",
        "type": "power_in",
        "description": "Supply input that powers the device when it is above VCC2 and monitors its own voltage."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering table lists the MAX6355 as MAX6355_ _UT-T in a 6-pin SOT23, which matches the requested; The pin 1 and pin 5 assignments for the MAX6355 were confirmed from the Pin Configurations drawing ("
        ],
        "pages_sent": 11,
        "cost_usd": 0.0618,
        "at": "2026-10-30T23:51:29"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6351-MAX6360.pdf",
        "pages": 11,
        "sha256": "b44c59eedef08670",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max6355lsut-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max6355lsut-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c830e2389ba816c5b9ccfd0548810c09ae1e992cb2f0e4d32e8630edf9299160",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}