main
Ray
Publish 0.1.0
2cf7010
MAX6336US16D3+T
Maxim Integrated · Monitors & Reset Circuits · SOT-143-4
MAX6336US16D3+T from Maxim Integrated, in a SOT-143-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the supervisor, as shown in the pin description table on page 4. |
| 2 | RESET | output | Active-low push/pull reset output that stays low while VCC is below the reset threshold or MR is asserted, and for the reset timeout period tRP after VCC rises above the threshold or MR is deasserted. |
| 3 | MR | input | Manual-reset input where a logic low asserts reset for as long as MR is low plus the reset timeout period tRP after MR goes high; leave unconnected or connect to VCC if not used. |
| 4 | VCC | power_in | Supply voltage input with a stated range of 0.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-143-4 |
| Category | Power Management ICs |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 0.7 | 5.5 | V | TA = 0°C to +85°C, MAX6335/MAX6336 | 2 | |
| Reset Threshold | VTH | 1.57 | 1.6 | 1.63 | V | TA = +25°C, reset threshold suffix 16 (Table 1) | 5 |
| Reset Threshold | VTH | 1.55 | 1.65 | V | TA = -40°C to +125°C, reset threshold suffix 16 (Table 1) | 5 | |
| Reset Threshold tolerance | VTH | -1.8 | 1.8 | % | TA = +25°C | 2 | |
| Reset Threshold tolerance | VTH | -3 | 3 | % | TA = -40°C to +125°C | 2 | |
| Reset Active Timeout Period | tRP | 100 | 150 | 200 | ms | MAX633_US__D3-T (timeout suffix 3) | 2 |
| RESET Output Low Voltage (MAX6336) | VOL | 0.4 | V | Reset asserted, ISINK = 50µA, VCC ≥ 1.0V | 2 | ||
| RESET Output High Voltage (MAX6336) | VOH | 0.8 | VCC | Reset asserted, ISOURCE = 200µA, VCC ≥ 1.8V | 2 | ||
| MR Pull-Up Resistance | 12 | 20 | 30 | kΩ | 2 | ||
| Supply Current | ICC | 3 | 6 | µA | VCC = 1.8V, no load | 2 | |
| Supply Current | ICC | 3.3 | 7 | µA | VCC = 2.5V, no load | 2 | |
| Supply Current | ICC | 1.2 | 5.5 | µA | TA = -40°C to +125°C, MAX6335/MAX6336, no load | 2 | |
| Supply Current | ICC | 0.78 | 5.5 | µA | TA = -40°C to +85°C, MAX6335/MAX6336, no load | 2 | |
| Operating Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Terminal Voltage (with respect to GND) VCC | VCC | -0.3 | 6 | V | With respect to GND | 2 | |
| Input Current (VCC) | 20 | mA | 2 | ||||
| Output Current (RESET, RESET) | 20 | mA | 2 | ||||
| Storage Temperature Range | TSTORE | -65 | 160 | °C | 2 | ||
| Lead Temperature | 300 | °C | Soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX6336US16D3+T - Footprint:
Package_TO_SOT_SMD:SOT-143 - 3D model: SOT-143-4 (KiCad packages3D, STEP)
- 3D model files:
max6336us16d3-t-etched.step/max6336us16d3-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6336us16d3-t.step/max6336us16d3-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (7 pp, sha256
17a3e107d1d75f3b, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX6336US16D3+T
**Maxim Integrated** · Monitors & Reset Circuits · SOT-143-4
MAX6336US16D3+T from Maxim Integrated, in a SOT-143-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the supervisor, as shown in the pin description table on page 4. |
| 2 | RESET | output | Active-low push/pull reset output that stays low while VCC is below the reset threshold or MR is asserted, and for the reset timeout period tRP after VCC rises above the threshold or MR is deasserted. |
| 3 | MR | input | Manual-reset input where a logic low asserts reset for as long as MR is low plus the reset timeout period tRP after MR goes high; leave unconnected or connect to VCC if not used. |
| 4 | VCC | power_in | Supply voltage input with a stated range of 0.7V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-143-4 |
| Category | Power Management ICs |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 0.7 | | 5.5 | V | TA = 0°C to +85°C, MAX6335/MAX6336 | 2 |
| Reset Threshold | VTH | 1.57 | 1.6 | 1.63 | V | TA = +25°C, reset threshold suffix 16 (Table 1) | 5 |
| Reset Threshold | VTH | 1.55 | | 1.65 | V | TA = -40°C to +125°C, reset threshold suffix 16 (Table 1) | 5 |
| Reset Threshold tolerance | VTH | -1.8 | | 1.8 | % | TA = +25°C | 2 |
| Reset Threshold tolerance | VTH | -3 | | 3 | % | TA = -40°C to +125°C | 2 |
| Reset Active Timeout Period | tRP | 100 | 150 | 200 | ms | MAX633_US__D3-T (timeout suffix 3) | 2 |
| RESET Output Low Voltage (MAX6336) | VOL | | | 0.4 | V | Reset asserted, ISINK = 50µA, VCC ≥ 1.0V | 2 |
| RESET Output High Voltage (MAX6336) | VOH | 0.8 | | | VCC | Reset asserted, ISOURCE = 200µA, VCC ≥ 1.8V | 2 |
| MR Pull-Up Resistance | | 12 | 20 | 30 | kΩ | | 2 |
| Supply Current | ICC | | 3 | 6 | µA | VCC = 1.8V, no load | 2 |
| Supply Current | ICC | | 3.3 | 7 | µA | VCC = 2.5V, no load | 2 |
| Supply Current | ICC | 1.2 | | 5.5 | µA | TA = -40°C to +125°C, MAX6335/MAX6336, no load | 2 |
| Supply Current | ICC | 0.78 | | 5.5 | µA | TA = -40°C to +85°C, MAX6335/MAX6336, no load | 2 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 2 |
| Terminal Voltage (with respect to GND) VCC | VCC | -0.3 | | 6 | V | With respect to GND | 2 |
| Input Current (VCC) | | | | 20 | mA | | 2 |
| Output Current (RESET, RESET) | | | | 20 | mA | | 2 |
| Storage Temperature Range | TSTORE | -65 | | 160 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10s | 2 |
## CAD (KiCad official)
- Symbol: `MAX6336US16D3+T`
- Footprint: `Package_TO_SOT_SMD:SOT-143`
- 3D model: SOT-143-4 (KiCad packages3D, STEP)
- 3D model files: `max6336us16d3-t-etched.step` / `max6336us16d3-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max6336us16d3-t.step` / `max6336us16d3-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max6335-max6337.pdf) (7 pp, sha256 `17a3e107d1d75f3b`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max6336us16d3-t-datasheet.pdf)