main
History Download
Ray Publish 0.1.0 d2720ae

MAX6173BASA+T

Maxim Integrated · Voltage References · SOP-8

MAX6173BASA+T from Maxim Integrated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 I.C. unconnected Internally connected pin that must not be connected externally.
2 IN power_in Positive power-supply input; the datasheet specifies a supply range of 4.5V to 40V for the MAX6173 (VIN must be at least VOUT + 2V).
3 TEMP output Temperature-proportional output voltage that follows die temperature (570mV typical at 25°C for the MAX6173, 1.9mV/°C temperature coefficient).
4 GND power_in Ground reference for the device.
5 TRIM input Output voltage trim input; connect to the center of a divider between OUT and GND for trimming, or leave unconnected to use the preset output voltage.
6 OUT power_out Precision reference output voltage (2.5V for the MAX6173); sources up to 30mA and sinks 2mA, with short-circuit current limited to 60mA to GND.
7 N.C. unconnected No connection; not internally connected.
8 I.C. unconnected Internally connected pin that must not be connected externally.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 2.4975 2.5 2.5025 V MAX6173B (0.1%); No load, TA = +25°C 3
Output Adjustment Range ∆VTRIM -3 3 % RPOT = 10kΩ 3
Output-Voltage Temperature Coefficient TCVOUT 3 10 ppm/°C MAX6173BASA; TA = -40°C to +125°C 3
Line Regulation DVOUT/DVIN 0.6 5 ppm/V 4.5V ≤ VIN ≤ 40V; TA = +25°C 3
Line Regulation DVOUT/DVIN 0.8 10 ppm/V 4.5V ≤ VIN ≤ 40V; TA = -40°C to +125°C 3
Load Regulation Sourcing DVOUT/DIOUT 2 10 ppm/mA Sourcing: 0 ≤ IOUT ≤ 10mA; TA = +25°C 3
Load Regulation Sourcing DVOUT/DIOUT 2 15 ppm/mA Sourcing: 0 ≤ IOUT ≤ 10mA; TA = -40°C to +125°C 3
Load Regulation Sinking DVOUT/DIOUT 50 500 ppm/mA Sinking: -0.6mA ≤ IOUT ≤ 0; TA = +25°C 3
Load Regulation Sinking DVOUT/DIOUT 90 900 ppm/mA Sinking: -0.6mA ≤ IOUT ≤ 0; TA = -40°C to +125°C 3
Supply Voltage Range VIN 4.5 40 V Guaranteed by line regulation test 3
Quiescent Supply Current IIN 300 450 µA No load; TA = +25°C 3
Quiescent Supply Current IIN 600 µA No load; TA = -40°C to +125°C 3
Operating Temperature Range -40 125 °C 2
IN to GND voltage IN -0.3 42 V Referenced to GND 2
OUT, TRIM, TEMP to GND voltage OUT, TRIM, TEMP -0.3 V Referenced to GND; upper limit VIN + 0.3V 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (soldering) 300 °C Soldering, 10s 2
Soldering Temperature (reflow) 260 °C Reflow 2
Output Short-Circuit Current ISC 60 mA OUT shorted to GND 3
Output Short-Circuit Current ISC 3 mA OUT shorted to IN 3
Temperature Hysteresis DVOUT/cycle 120 ppm Cycle 3
Long-Term Stability DVOUT/time 50 ppm 1000 hours at TA = +25°C 3
Noise Voltage eOUT 3.8 µVP-P f = 0.1Hz to 10Hz 3
Noise Voltage eOUT 6.8 µVRMS f = 10Hz to 1kHz 3
Turn-On Settling Time tR 150 µs To VOUT = 0.1% of final value, COUT = 50pF 3
TEMP Output Voltage VTEMP 570 mV 3
TEMP Temperature Coefficient TCTEMP 1.9 mV/°C 3
Thermal Resistance Junction to Ambient, multi-layer board θJA 132 °C/W Multi-layer board, JEDEC JESD51-7 four-layer board 2
Thermal Resistance Junction to Case, multi-layer board θJC 38 °C/W Multi-layer board 2
Thermal Resistance Junction to Ambient, single-layer board θJA 170 °C/W Single-layer board 2
Thermal Resistance Junction to Case, single-layer board θJC 40 °C/W Single-layer board 2

CAD (KiCad official)

  • Symbol: MAX6173BASA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: max6173basa-t-etched.step / max6173basa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6173basa-t.step / max6173basa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (20 pp, sha256 9fc116433955c555, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF