main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max6071aaut33-t: viewers · Ray
max6071aaut33-t-etched.glb Publish 0.1.0 · Ray
max6071aaut33-t-etched.step max6071aaut33-t: factory component page (tier=mfr) · Ray
max6071aaut33-t-hero.glb max6071aaut33-t: hero GLB from the etched model (keeps the MPN mark) · Ray
max6071aaut33-t-hero.overlay.json Publish 0.1.0 · Ray
max6071aaut33-t.glb Publish 0.1.0 · Ray
max6071aaut33-t.kicad_mod Publish 0.1.0 · Ray
max6071aaut33-t.kicad_sym Publish 0.1.0 · Ray
max6071aaut33-t.lbr Publish 0.1.0 · Ray
max6071aaut33-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

MAX6071AAUT33+T

Maxim Integrated · Voltage References · SOT-23-6

MAX6071AAUT33+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GNDF power_in Ground Force for the reference; the datasheet gives no electrical limit for this pin beyond its function as the force-side ground.
2 GNDS power_in Ground Sense, to be connected to the ground connection at the load; GNDS to GNDF is limited to -0.3V to +0.3V in the absolute maximum ratings.
3 EN input Enable input: drive high to enable the device and drive low to disable it, with EN limited to -0.3V to +6V relative to GNDS, GNDF, GND.
4 IN power_in Supply input, with IN limited to -0.3V to +6V relative to GNDS, GNDF, GND; an optional 0.1µF bypass capacitor between IN and GND can reduce input noise effects on the output.
5 OUTS output Voltage reference sense output, which is connected to the load-side voltage point to regulate the load voltage through the Kelvin connection and is limited to -0.3V to +6V relative to GNDS, GNDF, GND.
6 OUTF power_out Voltage reference force output that supplies load current; short OUTF to OUTS as close as possible to the load and bypass with a 0.1µF to 10µF capacitor to GND, with OUTF limited to -0.3V to the lower of (VIN + 0.3V) and +6V.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (MAX6071A, TA = +25°C) -0.04 0.04 % TA = +25°C 9
Output Voltage Temperature Drift (MAX6071A) TCVOUT 1.5 6 ppm/°C 9
Line Regulation 90 220 µV/V TA = +25°C 9
Line Regulation 285 µV/V TA = TMIN to TMAX 9
Load Regulation (sink) 100 190 µV/mA 0mA < IOUT < 10mA, sink 9
Load Regulation (source) 100 165 µV/mA 0mA < IOUT < 10mA, source 9
Dropout Voltage 65 150 mV IOUT = 10mA, TA = TMIN to TMAX (Note 3) 9
Output Current IOUT -10 10 mA 9
Supply Voltage VIN 3.5 5.5 V Guaranteed by line regulation 9
Capacitive-Load Stability Range 0.1 10 µF IOUT ≤ 10mA 9
Quiescent Supply Current IIN 160 240 µA TA = +25°C 9
Quiescent Supply Current IIN 330 µA TA = TMIN to TMAX 9
Shutdown Supply Current ISD 0.6 6 µA 9
Enable Input Current IEN -1 1 µA 9
Operating Temperature Range -40 125 °C 2
OUTF to GNDS, GNDF, GND -0.3 6 V Upper limit is the lower of (VIN + 0.3V) and +6V 2
OUTS to GNDS, GNDF, GND -0.3 6 V 2
IN to GNDS, GNDF, GND IN -0.3 6 V 2
EN to GNDS, GNDF, GND EN -0.3 6 V 2
GNDS to GNDF -0.3 0.3 V 2
Continuous Power Dissipation (SOT23) 347.8 mW TA = +70°C; derate 4.3mW/°C above +70°C 2
Junction Temperature 150 °C 2
Storage Temperature Range -65 150 °C 2
Soldering Temperature (reflow) 260 °C 2
Lead Temperature (soldering) 300 °C 10s 2
Long-Term Stability 40 ppm 1000 hours at TA = +25°C 9
Thermal Hysteresis 85 ppm Note 4: change in +25°C output after cycling TMAX to TMIN 9
Short-Circuit Current (sourcing to ground) ISC 25 mA Sourcing to ground 9
Short-Circuit Current (sinking from VIN) ISC 25 mA Sinking from VIN 9
Ripple Rejection 78 dB Frequency = 60Hz 9
1/f Noise Voltage eOUT 10 µVP-P 0.1Hz to 10Hz, COUT = 0.1µF 9
Thermal Noise Voltage (MAX6071) eOUT 9 µVRMS 10Hz to 10kHz, COUT = 0.1µF 9
Turn-On Settling Time (MAX6071) tR 42 µs Settling to 0.01%, COUT = 0.1µF 9
Enable Settling Time (MAX6071) tEN 75 µs Settling to 0.01%, COUT = 0.1µF 9
Thermal Resistance Junction to Ambient (SOT23) θJA 230 °C/W Multi-Layer Board 2
Thermal Resistance Junction to Case (SOT23) θJC 76 °C/W Multi-Layer Board 2

CAD (KiCad official)

  • Symbol: MAX6071AAUT33+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: max6071aaut33-t-etched.step / max6071aaut33-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6071aaut33-t.step / max6071aaut33-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (26 pp, sha256 5b48e6a8cb45c5c4, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF