3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX6071AAUT18+T
Maxim Integrated · Voltage References · SOT-23-6
MAX6071AAUT18+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GNDF | power_in | Ground Force for the MAX6071 SOT23 package, the ground return for the force output path. |
| 2 | GNDS | power_in | Ground Sense; connect to the ground connection at the load so the ground-return drop is cancelled. |
| 3 | EN | input | Active-high enable: drive high to enable the device, drive low to disable it, which forces the quiescent current below 1µA. |
| 4 | IN | power_in | Supply input for the device. |
| 5 | OUTS | output | Voltage reference sense output; the sense connection regulates the load voltage at the point of accuracy. |
| 6 | OUTF | output | Voltage reference force output; short OUTF to OUTS as close as possible to the load and bypass with a 0.1µF to 10µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -0.04 | 0.04 | % | MAX6071A, TA = +25°C | 4 | ||
| Output Voltage Temperature Drift | TCVOUT | 1.5 | 6 | ppm/°C | MAX6070A/MAX6071A | 4 | |
| Supply Voltage | VIN | 2.7 | 5.5 | V | Guaranteed by line regulation | 4 | |
| Quiescent Supply Current | IIN | 130 | 200 | µA | TA = +25°C | 4 | |
| Quiescent Supply Current | IIN | 260 | µA | TA = TMIN to TMAX | 4 | ||
| Enable Input Current | IEN | -1 | 1 | µA | 4 | ||
| Line Regulation | 35 | 150 | µV/V | Over specified VIN range; TA = +25°C | 4 | ||
| Line Regulation | 200 | µV/V | Over specified VIN range; TA = TMIN to TMAX | 4 | |||
| Load Regulation Sink | 120 | 200 | µV/mA | 0mA < IOUT < 10mA, sink | 4 | ||
| Load Regulation Source | 120 | 200 | µV/mA | 0mA < IOUT < 10mA, source | 4 | ||
| Output Current | IOUT | -10 | 10 | mA | 4 | ||
| Capacitive-Load Stability Range | 0.1 | 10 | µF | IOUT ≤ 10mA | 4 | ||
| Short-Circuit Current Sourcing | ISC | 25 | mA | Sourcing to ground | 4 | ||
| Short-Circuit Current Sinking | ISC | 25 | mA | Sinking from VIN | 4 | ||
| Shutdown Supply Current | ISD | 6 | µA | 4 | |||
| Long-Term Stability | 35 | ppm | 1000 hours at TA = +25°C | 4 | |||
| Thermal Hysteresis | 85 | ppm | 4 | ||||
| Ripple Rejection | 89 | dB | Frequency = 60Hz | 4 | |||
| 1/f Noise Voltage | eOUT | 6 | µVP-P | 1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF | 4 | ||
| Thermal Noise Voltage MAX6071 | eOUT | 7 | µVRMS | 10Hz to 10kHz, COUT = 0.1µF | 4 | ||
| Turn-On Settling Time MAX6071 | tR | 32 | µs | Settling to 0.01%, COUT = 0.1µF | 4 | ||
| Enable Settling Time MAX6071 | tEN | 60 | µs | Settling to 0.01%, COUT = 0.1µF | 4 | ||
| Supply Voltage Absolute Maximum IN | VIN | -0.3 | 6 | V | IN to GNDS, GNDF, GND | 2 | |
| EN Pin Voltage | VEN | -0.3 | 6 | V | EN to GNDS, GNDF, GND | 2 | |
| OUTS Voltage | VOUTS | -0.3 | 6 | V | OUTS to GNDS, GNDF, GND | 2 | |
| OUTF Voltage | VOUTF | -0.3 | 6 | V | OUTF to GNDS, GNDF, GND; lower of (VIN + 0.3V), +6V | 2 | |
| GNDS to GNDF Voltage | -0.3 | 0.3 | V | GNDS to GNDF | 2 | ||
| Continuous Power Dissipation SOT23 | 347.8 | mW | TA = +70°C; derate 4.3mW/NC above +70°C | 2 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Soldering Temperature (reflow) | 260 | °C | 2 | ||||
| Lead Temperature (soldering, 10s) | 300 | °C | 10s | 2 | |||
| Thermal Resistance Junction to Ambient SOT23 | θJA | 230 | °C/W | Multi-layer board, SOT23 | 2 | ||
| Thermal Resistance Junction to Case SOT23 | θJC | 76 | °C/W | Multi-layer board, SOT23 | 2 |
CAD (KiCad official)
- Symbol:
MAX6071AAUT18+T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
max6071aaut18-t-etched.step/max6071aaut18-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6071aaut18-t.step/max6071aaut18-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (26 pp, sha256
5b48e6a8cb45c5c4, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).