component
MAX6070AAUT33+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Voltage Reference, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MAX6070AAUT33+T
Analog Devices Inc Maxim Integrated · Voltage Reference · SOT-23-6
MAX6070AAUT33+T from Analog Devices Inc Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FILTER | passive | Filter input: connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave unconnected if not used. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable: drive high to enable the device and drive low to disable it (disabling forces quiescent current below 1µA). |
| 4 | IN | power_in | Supply input. |
| 5 | OUTS | output | Voltage reference sense output, used to regulate the load voltage at the point where accuracy is needed. |
| 6 | OUTF | output | Voltage reference force output: short OUTF to OUTS as close as possible to the load and bypass it with a 0.1µF to 10µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (MAX6070A/MAX6071A) | -0.04 | 0.04 | % | MAX6070A/MAX6071A, TA = +25°C | 9 | ||
| Output Current | IOUT | -10 | 10 | mA | 9 | ||
| Output Voltage Temperature Drift (MAX6070A/MAX6071A) | TCVOUT | 1.5 | 6 | ppm/°C | MAX6070A/MAX6071A | 9 | |
| Line Regulation | 90 | 220 | µV/V | TA = +25°C, over specified VIN range | 9 | ||
| Line Regulation | 285 | µV/V | TA = TMIN to TMAX, over specified VIN range | 9 | |||
| Load Regulation, sink | 100 | 190 | µV/mA | 0mA < IOUT < 10mA, sink | 9 | ||
| Load Regulation, source | 100 | 165 | µV/mA | 0mA < IOUT < 10mA, source | 9 | ||
| Dropout Voltage | 65 | 150 | mV | IOUT = 10mA, TA = TMIN to TMAX | 9 | ||
| Supply Voltage | VIN | 3.5 | 5.5 | V | Guaranteed by line regulation | 9 | |
| Quiescent Supply Current | IIN | 160 | 240 | µA | TA = +25°C | 9 | |
| Quiescent Supply Current | IIN | 330 | µA | TA = TMIN to TMAX | 9 | ||
| Shutdown Supply Current | ISD | 0.6 | 6 | µA | 9 | ||
| Enable Input Current | IEN | -1 | 1 | µA | 9 | ||
| Capacitive-Load Stability Range | 0.1 | 10 | µF | IOUT ≤10mA | 9 | ||
| Input Voltage IN to GNDS, GNDF, GND | -0.3 | 6 | V | Relative to GNDS, GNDF, GND | 2 | ||
| Output Voltage OUTS to GNDS, GNDF, GND | -0.3 | 6 | V | Relative to GNDS, GNDF, GND | 2 | ||
| Enable Voltage EN to GNDS, GNDF, GND | -0.3 | 6 | V | Relative to GNDS, GNDF, GND | 2 | ||
| Output Voltage OUTF to GNDS, GNDF, GND | -0.3 | V | Upper limit printed as lower of (VIN + 0.3V), +6V | 2 | |||
| FILTER to GND | -0.3 | V | Upper limit printed as lower of (VIN + 0.3V), +6V | 2 | |||
| GNDS to GNDF | -0.3 | 0.3 | V | 2 | |||
| Continuous Power Dissipation SOT23 | 347.8 | mW | TA = +70°C; derate 4.3mW/°C above +70°C | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | 2 | ||||
| Lead Temperature (soldering) | 300 | °C | 10s | 2 | |||
| Thermal Resistance Junction to Ambient (SOT23) | θJA | 230 | °C/W | Multi-layer board, JESD51-7 | 2 | ||
| Thermal Resistance Junction to Case (SOT23) | θJC | 76 | °C/W | 2 | |||
| 1/f Noise Voltage | eOUT | 10 | µVP-P | 0.1Hz to 10Hz, COUT = 0.1µF | 9 | ||
| Thermal Noise Voltage (MAX6070) | eOUT | 6 | µVRMS | 10Hz to 10kHz, COUT = 0.1µF, CFILTER = 0.1µF | 9 | ||
| Ripple Rejection | 78 | dB | Frequency = 60Hz | 9 | |||
| Turn-On Settling Time (MAX6070) | tR | 10 | ms | Settling to 0.01%, COUT = 0.1µF, CFILTER = 0.1µF | 9 | ||
| Enable Settling Time (MAX6070) | tEN | 10 | ms | Settling to 0.01%, COUT = 0.1µF, CFILTER = 0.1µF | 9 | ||
| Short-Circuit Current, sourcing to ground | ISC | 25 | mA | Sourcing to ground | 9 | ||
| Short-Circuit Current, sinking from VIN | ISC | 25 | mA | Sinking from VIN | 9 | ||
| Long-Term Stability | 40 | ppm | 1000 hours at TA = +25°C | 9 | |||
| Thermal Hysteresis | 85 | ppm | Note 4 | 9 |
CAD (KiCad official)
- Symbol:
MAX6070AAUT33+T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
max6070aaut33-t-etched.step/max6070aaut33-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6070aaut33-t.step/max6070aaut33-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (26 pp, sha256
2cb9f20f6ca082e6, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX6070AAUT33+T
**Analog Devices Inc Maxim Integrated** · Voltage Reference · SOT-23-6
MAX6070AAUT33+T from Analog Devices Inc Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FILTER | passive | Filter input: connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave unconnected if not used. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable: drive high to enable the device and drive low to disable it (disabling forces quiescent current below 1µA). |
| 4 | IN | power_in | Supply input. |
| 5 | OUTS | output | Voltage reference sense output, used to regulate the load voltage at the point where accuracy is needed. |
| 6 | OUTF | output | Voltage reference force output: short OUTF to OUTS as close as possible to the load and bypass it with a 0.1µF to 10µF capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (MAX6070A/MAX6071A) | | -0.04 | | 0.04 | % | MAX6070A/MAX6071A, TA = +25°C | 9 |
| Output Current | IOUT | -10 | | 10 | mA | | 9 |
| Output Voltage Temperature Drift (MAX6070A/MAX6071A) | TCVOUT | | 1.5 | 6 | ppm/°C | MAX6070A/MAX6071A | 9 |
| Line Regulation | | | 90 | 220 | µV/V | TA = +25°C, over specified VIN range | 9 |
| Line Regulation | | | | 285 | µV/V | TA = TMIN to TMAX, over specified VIN range | 9 |
| Load Regulation, sink | | | 100 | 190 | µV/mA | 0mA < IOUT < 10mA, sink | 9 |
| Load Regulation, source | | | 100 | 165 | µV/mA | 0mA < IOUT < 10mA, source | 9 |
| Dropout Voltage | | | 65 | 150 | mV | IOUT = 10mA, TA = TMIN to TMAX | 9 |
| Supply Voltage | VIN | 3.5 | | 5.5 | V | Guaranteed by line regulation | 9 |
| Quiescent Supply Current | IIN | | 160 | 240 | µA | TA = +25°C | 9 |
| Quiescent Supply Current | IIN | | | 330 | µA | TA = TMIN to TMAX | 9 |
| Shutdown Supply Current | ISD | | 0.6 | 6 | µA | | 9 |
| Enable Input Current | IEN | -1 | | 1 | µA | | 9 |
| Capacitive-Load Stability Range | | 0.1 | | 10 | µF | IOUT ≤10mA | 9 |
| Input Voltage IN to GNDS, GNDF, GND | | -0.3 | | 6 | V | Relative to GNDS, GNDF, GND | 2 |
| Output Voltage OUTS to GNDS, GNDF, GND | | -0.3 | | 6 | V | Relative to GNDS, GNDF, GND | 2 |
| Enable Voltage EN to GNDS, GNDF, GND | | -0.3 | | 6 | V | Relative to GNDS, GNDF, GND | 2 |
| Output Voltage OUTF to GNDS, GNDF, GND | | -0.3 | | | V | Upper limit printed as lower of (VIN + 0.3V), +6V | 2 |
| FILTER to GND | | -0.3 | | | V | Upper limit printed as lower of (VIN + 0.3V), +6V | 2 |
| GNDS to GNDF | | -0.3 | | 0.3 | V | | 2 |
| Continuous Power Dissipation SOT23 | | | | 347.8 | mW | TA = +70°C; derate 4.3mW/°C above +70°C | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Soldering Temperature (reflow) | | | | 260 | °C | | 2 |
| Lead Temperature (soldering) | | | | 300 | °C | 10s | 2 |
| Thermal Resistance Junction to Ambient (SOT23) | θJA | | 230 | | °C/W | Multi-layer board, JESD51-7 | 2 |
| Thermal Resistance Junction to Case (SOT23) | θJC | | 76 | | °C/W | | 2 |
| 1/f Noise Voltage | eOUT | | 10 | | µVP-P | 0.1Hz to 10Hz, COUT = 0.1µF | 9 |
| Thermal Noise Voltage (MAX6070) | eOUT | | 6 | | µVRMS | 10Hz to 10kHz, COUT = 0.1µF, CFILTER = 0.1µF | 9 |
| Ripple Rejection | | | 78 | | dB | Frequency = 60Hz | 9 |
| Turn-On Settling Time (MAX6070) | tR | | 10 | | ms | Settling to 0.01%, COUT = 0.1µF, CFILTER = 0.1µF | 9 |
| Enable Settling Time (MAX6070) | tEN | | 10 | | ms | Settling to 0.01%, COUT = 0.1µF, CFILTER = 0.1µF | 9 |
| Short-Circuit Current, sourcing to ground | ISC | | 25 | | mA | Sourcing to ground | 9 |
| Short-Circuit Current, sinking from VIN | ISC | | 25 | | mA | Sinking from VIN | 9 |
| Long-Term Stability | | | 40 | | ppm | 1000 hours at TA = +25°C | 9 |
| Thermal Hysteresis | | | 85 | | ppm | Note 4 | 9 |
## CAD (KiCad official)
- Symbol: `MAX6070AAUT33+T`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `max6070aaut33-t-etched.step` / `max6070aaut33-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max6070aaut33-t.step` / `max6070aaut33-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885007347683328) (26 pp, sha256 `2cb9f20f6ca082e6`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max6070aaut33-t-datasheet.pdf)