main
Ray
Publish 0.1.0
85a7fd5
MAX490EIM
HGSEMI · RS-485 / RS-422 ICs · SOP-8
MAX490EIM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply pin, with 3.0 V ≤ VCC ≤ 5.5 V. |
| 2 | RO | output | Receiver output is high when A-B ≥ -50mV and low when A-B ≤ -200mV. |
| 3 | DI | input | Driver input: low forces Y low and Z high, and high forces Y high and Z low. |
| 4 | GND | power_in | Ground pin. |
| 5 | Y | output | Driver non-inverting output. |
| 6 | Z | output | Driver inverting output. |
| 7 | B | input | Receiver inverting input. |
| 8 | A | input | Receiver non-inverting input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | 7 | V | 3 | |||
| Driver input voltage | DI | -0.3 | V | 3 | |||
| Driver output voltage | Y, Z | -8 | 13 | V | 3 | ||
| Receiver input voltage | A, B | -8 | 13 | V | 3 | ||
| Receiver output voltage | RO | -0.3 | V | 3 | |||
| Continuous power dissipation | 471 | mW | SOP8 | 3 | |||
| Operating temperature range | TA | -40 | 85 | ℃ | MAX490EI (industrial grade) | 3 | |
| Storage temperature range | -65 | 150 | ℃ | 3 | |||
| Lead soldering temperature | TLEAD | 260 | ℃ | 10 s | 3 | ||
| Supply voltage | VCC | 3 | 5.5 | V | 3 | ||
| Differential driver output (no load) | VOD1 | 1.5 | 5 | V | Figure 4, no load | 3 | |
| Differential driver output | VOD2 | 2 | 5 | V | Figure 4, R=50Ω (RS-422) | 3 | |
| Differential driver output | VOD2 | 1.5 | 5 | V | Figure 4, R=27Ω (RS-485) | 3 | |
| Change in magnitude of differential output voltage | ∆VOD | 0.2 | V | Figure 4, R=50Ω or R=27Ω | 3 | ||
| Driver common-mode output voltage | VOC | 1 | 3 | V | Figure 4, R=50Ω or R=27Ω | 3 | |
| Change in magnitude of common-mode output voltage | ∆VOC | 0.2 | V | Figure 4, R=50Ω or R=27Ω | 3 | ||
| Input high voltage | VIH1 | 2 | V | DE, DI, /RE | 3 | ||
| Input low voltage | VIL1 | 0.8 | V | DE, DI, /RE | 3 | ||
| Input current (A, B), full duplex | IIN4 | 125 | µA | DE=GND; VCC=GND or 5.25V; VIN=12V | 3 | ||
| Input current (A, B), full duplex | IIN4 | -75 | µA | DE=GND; VCC=GND or 5.25V; VIN=-7V | 3 | ||
| Driver short-circuit output current | IOSD | -250 | mA | -7V≤VOUT≤VCC | 3 | ||
| Driver short-circuit output current | IOSD | 250 | mA | 0V≤VOUT≤12V | 3 | ||
| Driver short-circuit output current | IOSD | -25 | 25 | mA | 0V≤VOUT≤VCC | 3 | |
| Receiver differential threshold voltage | VTH | -200 | -110 | -50 | mV | -7V≤VCM≤12V | 3 |
| Receiver output low voltage | VOL | 0.4 | V | IO=4mA, VID=300mV | 3 | ||
| Receiver tri-state output current | IOZR | -1 | 1 | µA | 0.4V≤VO≤2.4V | 4 | |
| Receiver output short-circuit current | IOSR | -95 | 95 | mA | 0V≤VRO≤VCC | 4 | |
| Static supply current | ICC | 270 | 600 | µA | No load, DI=0 or VCC | 4 | |
| ESD HBM (A/B pins) | -15 | 15 | kV | A/B pins, Human Body Model | 4 | ||
| ESD MM (A/B pins) | -800 | 800 | V | A/B pins, Machine Model | 4 | ||
| ESD contact discharge (A/B pins) | -12 | 12 | kV | A/B pins, IEC 61000-4-2 | 4 | ||
| ESD air discharge (A/B pins) | -15 | 15 | kV | A/B pins, IEC 61000-4-2 | 4 | ||
| ESD HBM (other pins) | -6 | 6 | kV | Other pins, Human Body Model | 4 | ||
| ESD MM (other pins) | -400 | 400 | V | Other pins, Machine Model | 4 | ||
| Driver propagation delay, low-to-high | TDPLH | 250 | 720 | 900 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Driver propagation delay, high-to-low | TDPHL | 250 | 720 | 900 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Driver output skew /tDPLH - tDPHL/ | TDHKEW | -3 | 100 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 | |
| Driver rise or fall time | tDR, tDF | 200 | 530 | 750 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Maximum data rate | FMAX | 1000 | kbps | 4 | |||
| Receiver propagation delay (TRPLH, TRPHL) | TRPLH, TRPHL | 127 | 200 | ns | Figure 7 and 8, /VID/≥2.0V, VID≤15ns rise and fall time | 4 | |
| Differential receiver skew /tDPLH - tDPHL/ | TRSKD | -30 | 3 | 30 | ns | Figure 7 and 8, /VID/≥2.0V, VID≤15ns rise and fall time | 4 |
CAD (KiCad official)
- Symbol:
MAX490EIM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max490eim-etched.step/max490eim-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max490eim.step/max490eim.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
c206c33bdcf7041e, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX490EIM
**HGSEMI** · RS-485 / RS-422 ICs · SOP-8
MAX490EIM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply pin, with 3.0 V ≤ VCC ≤ 5.5 V. |
| 2 | RO | output | Receiver output is high when A-B ≥ -50mV and low when A-B ≤ -200mV. |
| 3 | DI | input | Driver input: low forces Y low and Z high, and high forces Y high and Z low. |
| 4 | GND | power_in | Ground pin. |
| 5 | Y | output | Driver non-inverting output. |
| 6 | Z | output | Driver inverting output. |
| 7 | B | input | Receiver inverting input. |
| 8 | A | input | Receiver non-inverting input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | | | 7 | V | | 3 |
| Driver input voltage | DI | -0.3 | | | V | | 3 |
| Driver output voltage | Y, Z | -8 | | 13 | V | | 3 |
| Receiver input voltage | A, B | -8 | | 13 | V | | 3 |
| Receiver output voltage | RO | -0.3 | | | V | | 3 |
| Continuous power dissipation | | | | 471 | mW | SOP8 | 3 |
| Operating temperature range | TA | -40 | | 85 | ℃ | MAX490EI (industrial grade) | 3 |
| Storage temperature range | | -65 | | 150 | ℃ | | 3 |
| Lead soldering temperature | TLEAD | | | 260 | ℃ | 10 s | 3 |
| Supply voltage | VCC | 3 | | 5.5 | V | | 3 |
| Differential driver output (no load) | VOD1 | 1.5 | | 5 | V | Figure 4, no load | 3 |
| Differential driver output | VOD2 | 2 | | 5 | V | Figure 4, R=50Ω (RS-422) | 3 |
| Differential driver output | VOD2 | 1.5 | | 5 | V | Figure 4, R=27Ω (RS-485) | 3 |
| Change in magnitude of differential output voltage | ∆VOD | | | 0.2 | V | Figure 4, R=50Ω or R=27Ω | 3 |
| Driver common-mode output voltage | VOC | 1 | | 3 | V | Figure 4, R=50Ω or R=27Ω | 3 |
| Change in magnitude of common-mode output voltage | ∆VOC | | | 0.2 | V | Figure 4, R=50Ω or R=27Ω | 3 |
| Input high voltage | VIH1 | 2 | | | V | DE, DI, /RE | 3 |
| Input low voltage | VIL1 | | | 0.8 | V | DE, DI, /RE | 3 |
| Input current (A, B), full duplex | IIN4 | | | 125 | µA | DE=GND; VCC=GND or 5.25V; VIN=12V | 3 |
| Input current (A, B), full duplex | IIN4 | -75 | | | µA | DE=GND; VCC=GND or 5.25V; VIN=-7V | 3 |
| Driver short-circuit output current | IOSD | -250 | | | mA | -7V≤VOUT≤VCC | 3 |
| Driver short-circuit output current | IOSD | | | 250 | mA | 0V≤VOUT≤12V | 3 |
| Driver short-circuit output current | IOSD | -25 | | 25 | mA | 0V≤VOUT≤VCC | 3 |
| Receiver differential threshold voltage | VTH | -200 | -110 | -50 | mV | -7V≤VCM≤12V | 3 |
| Receiver output low voltage | VOL | | | 0.4 | V | IO=4mA, VID=300mV | 3 |
| Receiver tri-state output current | IOZR | -1 | | 1 | µA | 0.4V≤VO≤2.4V | 4 |
| Receiver output short-circuit current | IOSR | -95 | | 95 | mA | 0V≤VRO≤VCC | 4 |
| Static supply current | ICC | | 270 | 600 | µA | No load, DI=0 or VCC | 4 |
| ESD HBM (A/B pins) | | -15 | | 15 | kV | A/B pins, Human Body Model | 4 |
| ESD MM (A/B pins) | | -800 | | 800 | V | A/B pins, Machine Model | 4 |
| ESD contact discharge (A/B pins) | | -12 | | 12 | kV | A/B pins, IEC 61000-4-2 | 4 |
| ESD air discharge (A/B pins) | | -15 | | 15 | kV | A/B pins, IEC 61000-4-2 | 4 |
| ESD HBM (other pins) | | -6 | | 6 | kV | Other pins, Human Body Model | 4 |
| ESD MM (other pins) | | -400 | | 400 | V | Other pins, Machine Model | 4 |
| Driver propagation delay, low-to-high | TDPLH | 250 | 720 | 900 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Driver propagation delay, high-to-low | TDPHL | 250 | 720 | 900 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Driver output skew /tDPLH - tDPHL/ | TDHKEW | -3 | | 100 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Driver rise or fall time | tDR, tDF | 200 | 530 | 750 | ns | Figure 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Maximum data rate | FMAX | | | 1000 | kbps | | 4 |
| Receiver propagation delay (TRPLH, TRPHL) | TRPLH, TRPHL | | 127 | 200 | ns | Figure 7 and 8, /VID/≥2.0V, VID≤15ns rise and fall time | 4 |
| Differential receiver skew /tDPLH - tDPHL/ | TRSKD | -30 | 3 | 30 | ns | Figure 7 and 8, /VID/≥2.0V, VID≤15ns rise and fall time | 4 |
## CAD (KiCad official)
- Symbol: `MAX490EIM`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `max490eim-etched.step` / `max490eim-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max490eim.step` / `max490eim.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/max490eim-datasheet.pdf) (12 pp, sha256 `c206c33bdcf7041e`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max490eim-datasheet.pdf)