main
Ray
Publish 0.1.0
6973f19
MAX488ESA+T
Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8
MAX488ESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply input, 4.75V ≤ VCC ≤ 5.25V. |
| 2 | RO | output | Receiver output: RO is high if A > B by 200mV and low if A < B by 200mV. |
| 3 | DI | input | Driver input: a low on DI forces output Y low and Z high, a high on DI forces Y high and Z low. |
| 4 | GND | power_in | Ground. |
| 5 | Y | output | Noninverting driver output. |
| 6 | Z | output | Inverting driver output. |
| 7 | B | input | Inverting receiver input. |
| 8 | A | input | Noninverting receiver input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 12 | V | 2 | |||
| Driver Input Voltage (DI) | -0.5 | V | upper limit printed as (VCC + 0.5V) | 2 | |||
| Driver Output Voltage (A, B) | -8 | 12.5 | V | 2 | |||
| Receiver Input Voltage (A, B) | -8 | 12.5 | V | 2 | |||
| Receiver Output Voltage (RO) | -0.5 | V | upper limit printed as (VCC + 0.5V) | 2 | |||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | 10 sec soldering | 2 | |||
| Operating Temperature Range (MAX4__E__ grade, MAX488ESA) | TA | -40 | 85 | °C | MAX4_ E _ extended grade | 2 | |
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V | 2 | |
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = 4mA, VID = -200mV | 2 | ||
| Receiver Output High Voltage | VOH | 3.5 | V | IO = -4mA, VID = 200mV | 2 | ||
| Input Low Voltage | VIL | 0.8 | V | 2 | |||
| Input High Voltage | VIH | 2 | V | 2 | |||
| Input Current | IIN1 | -2 | 2 | μA | DE, DI, RE | 2 | |
| Receiver Short-Circuit Current | IOSR | 7 | 95 | mA | 0V ≤ VO ≤ VCC | 3 | |
| Driver Short-Circuit Current, VO = Low | IOSD2 | 35 | 250 | mA | -7V ≤ VO ≤ 12V (Note 4) | 3 | |
| Driver Short-Circuit Current, VO = High | IOSD1 | 35 | 250 | mA | -7V ≤ VO ≤ 12V (Note 4) | 3 | |
| Change in Magnitude of Driver Differential Output Voltage for Complementary Output States | ΔVOD | 0.2 | V | for complementary output states | 2 | ||
| Driver Input to Output | tPLH, tPHL | 250 | 800 | 2000 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Output Skew to Output | tSKEW | 100 | 800 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 | |
| Driver Rise or Fall Time | tR, tF | 250 | 2000 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 | |
| Receiver Input to Output | tPLH, tPHL | 250 | 800 | 2000 | ns | 4 | |
| Differential Receiver Skew | tSKD | 100 | ns | /tPLH - tPHL/ | 4 | ||
| Receiver Input Hysteresis | ΔVTH | 70 | mV | 2 |
CAD (KiCad official)
- Symbol:
MAX488ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max488esa-t-etched.step/max488esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max488esa-t.step/max488esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (17 pp, sha256
926e9dd34b321ea8, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX488ESA+T
**Analog Devices Inc Maxim Integrated** · RS-485 / RS-422 ICs · SOIC-8
MAX488ESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply input, 4.75V ≤ VCC ≤ 5.25V. |
| 2 | RO | output | Receiver output: RO is high if A > B by 200mV and low if A < B by 200mV. |
| 3 | DI | input | Driver input: a low on DI forces output Y low and Z high, a high on DI forces Y high and Z low. |
| 4 | GND | power_in | Ground. |
| 5 | Y | output | Noninverting driver output. |
| 6 | Z | output | Inverting driver output. |
| 7 | B | input | Inverting receiver input. |
| 8 | A | input | Noninverting receiver input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | | | 12 | V | | 2 |
| Driver Input Voltage (DI) | | -0.5 | | | V | upper limit printed as (VCC + 0.5V) | 2 |
| Driver Output Voltage (A, B) | | -8 | | 12.5 | V | | 2 |
| Receiver Input Voltage (A, B) | | -8 | | 12.5 | V | | 2 |
| Receiver Output Voltage (RO) | | -0.5 | | | V | upper limit printed as (VCC + 0.5V) | 2 |
| Storage Temperature Range | | -65 | | 160 | °C | | 2 |
| Lead Temperature (soldering) | | | | 300 | °C | 10 sec soldering | 2 |
| Operating Temperature Range (MAX4__E__ grade, MAX488ESA) | TA | -40 | | 85 | °C | MAX4_ _E_ _ extended grade | 2 |
| Receiver Differential Threshold Voltage | VTH | -0.2 | | 0.2 | V | -7V ≤ VCM ≤ 12V | 2 |
| Receiver Output Low Voltage | VOL | | | 0.4 | V | IO = 4mA, VID = -200mV | 2 |
| Receiver Output High Voltage | VOH | 3.5 | | | V | IO = -4mA, VID = 200mV | 2 |
| Input Low Voltage | VIL | | | 0.8 | V | | 2 |
| Input High Voltage | VIH | 2 | | | V | | 2 |
| Input Current | IIN1 | -2 | | 2 | μA | DE, DI, RE | 2 |
| Receiver Short-Circuit Current | IOSR | 7 | | 95 | mA | 0V ≤ VO ≤ VCC | 3 |
| Driver Short-Circuit Current, VO = Low | IOSD2 | 35 | | 250 | mA | -7V ≤ VO ≤ 12V (Note 4) | 3 |
| Driver Short-Circuit Current, VO = High | IOSD1 | 35 | | 250 | mA | -7V ≤ VO ≤ 12V (Note 4) | 3 |
| Change in Magnitude of Driver Differential Output Voltage for Complementary Output States | ΔVOD | | | 0.2 | V | for complementary output states | 2 |
| Driver Input to Output | tPLH, tPHL | 250 | 800 | 2000 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Output Skew to Output | tSKEW | | 100 | 800 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Driver Rise or Fall Time | tR, tF | 250 | | 2000 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 4 |
| Receiver Input to Output | tPLH, tPHL | 250 | 800 | 2000 | ns | | 4 |
| Differential Receiver Skew | tSKD | | | 100 | ns | /tPLH - tPHL/ | 4 |
| Receiver Input Hysteresis | ΔVTH | | 70 | | mV | | 2 |
## CAD (KiCad official)
- Symbol: `MAX488ESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `max488esa-t-etched.step` / `max488esa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max488esa-t.step` / `max488esa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172724305661952) (17 pp, sha256 `926e9dd34b321ea8`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max488esa-t-datasheet.pdf)