component
MAX487CUA+T-TUDI
Public Made by Adomby adom
Tudi RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX487CUA+T-TUDI
Tudi · RS-485 / RS-422 ICs · MSOP-8
MAX487CUA+T-TUDI from Tudi, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: when /RE is low, RO is high if A-B ≥ -50mV and low if A-B ≤ -200mV. |
| 2 | /RE | input | Receiver output enable, active low: low enables RO, high puts RO in high impedance; with /RE high and DE low the device enters low-power shutdown. |
| 3 | DE | input | Driver output enable: high enables the driver outputs, low puts them in high impedance; with /RE high and DE low the device enters low-power shutdown. |
| 4 | DI | input | Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low. |
| 5 | GND | power_in | Ground reference for all voltages on the device. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output (bus line A). |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output (bus line B). |
| 8 | VCC | power_in | Supply pin; operating supply range is 4.75 V to 5.25 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tudi |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 7 | V | 3 | |||
| Bus-side input voltage (A, B) | -7 | 13 | V | 3 | |||
| Control port voltage (/RE, DE, DI) | -0.3 | V | upper limit printed as VCC+0.3 V | 3 | |||
| Receiver output voltage (RO) | -0.3 | V | upper limit printed as VCC+0.3 V | 3 | |||
| Operating temperature range | -40 | 85 | ℃ | 3 | |||
| Storage temperature range | -60 | 150 | ℃ | 3 | |||
| Soldering temperature | 300 | ℃ | 3 | ||||
| Differential driver output, no load | VOD1 | 5 | V | 无负载 | 4 | ||
| Differential driver output, RL = 27 Ω | VOD2 | 5 | V | 图 2，RL = 27 Ω | 4 | ||
| Differential driver output, RL = 50 Ω | VOD2 | 2 | V | 图 2，RL = 50 Ω | 4 | ||
| Change in differential output voltage magnitude | ∆VOD | 0.2 | V | 图 2，RL = 27 Ω | 4 | ||
| Driver common-mode output voltage | VOC | 3 | V | 图 2，RL = 27 Ω | 4 | ||
| Change in common-mode output voltage magnitude | ∆VOC | 0.2 | V | 图 2，RL = 27 Ω | 4 | ||
| High-level input voltage (DE, DI, /RE) | VIH | 2 | V | 4 | |||
| Low-level input voltage (DE, DI, /RE) | VIL | 0.8 | V | 4 | |||
| Logic input current (DE, DI, /RE) | IIN1 | -2 | 2 | uA | 4 | ||
| Driver output short-circuit current, short to high | IOSD1 | 35 | 250 | mA | 短路到 0V~12 V | 4 | |
| Driver output short-circuit current, short to low | IOSD2 | -250 | -35 | mA | 短路到-7V~0V | 4 | |
| Receiver input current (A, B), VIN = 12 V | IIN2 | 125 | uA | DE = 0 V, VCC = 0 或 5V, VIN = 12 V | 4 | ||
| Receiver input current (A, B), VIN = -7 V | IIN2 | -100 | uA | DE = 0 V, VCC = 0 或 5V, VIN = -7 V | 4 | ||
| Positive-going input threshold voltage | VIT+ | -50 | mV | -7V≦VCM≦12V | 4 | ||
| Negative-going input threshold voltage | VIT- | -200 | mV | 4 | |||
| Receiver input hysteresis voltage | Vhys | 10 | 30 | mV | -7V≦VCM≦12V | 4 | |
| Low-level output voltage | VOL | 0.4 | V | IOUT = +4 mA, VID = -200 mV | 4 | ||
| Three-state output leakage current (receiver) | IOZR | -1 | 1 | uA | 0.4 V < VO < 2.4 V | 5 | |
| Receiver input resistance | RIN | 96 | kΩ | -7V≦VCM≦12V | 5 | ||
| Receiver short-circuit current | IOSR | 7 | 95 | mA | 0 V≤VO≤VCC | 5 | |
| Supply current, /RE = 0 V or VCC, DE = 0 | ICC | 180 | 500 | uA | /RE=0V 或 VCC, DE = 0 | 5 | |
| Supply current, /RE = VCC, DE = VCC | ICC | 170 | 400 | uA | /RE=VCC，DE = VCC | 5 | |
| Shutdown current | ISHDN | 0.5 | 10 | uA | DE = 0 V, /RE = VCC | 5 | |
| ESD protection, A and B, human body model | -15 | 15 | KV | Human body model (HBM) | 5 | ||
| ESD protection, A and B, IEC 61000-4-2 contact discharge | -15 | 15 | KV | IEC 61000-4-2 contact discharge | 5 | ||
| Driver propagation delay, low to high | tDPLH | 1000 | ns | RDIFF = 54 Ω, CL1 = CL2 = 100 pF (见图 3 与图 4) | 5 | ||
| Driver propagation delay, high to low | tDPHL | 1000 | ns | RDIFF = 54 Ω, CL1 = CL2 = 100 pF (见图 3 与图 4) | 5 | ||
| Driver skew /tDPLH - tDPHL/ | tSKEW1 | -100 | 100 | ns | 5 | ||
| Driver rise/fall time | tDR, tDF | 200 | 500 | 700 | ns | 5 | |
| Driver enable to output high | tDZH | 2500 | ns | CL = 100 pF, S1 闭合（见图 5、6） | 5 | ||
| Driver enable to output low | tDZL | 2500 | ns | 5 | |||
| Driver input low to disable | tDLZ | 100 | ns | CL = 15 pF, S2 闭合（见图 5、6） | 5 | ||
| Driver input high to disable | tDHZ | 100 | ns | 5 | |||
| Driver enable to output high, shutdown | tDZH(SHDN) | 4500 | ns | 关断条件下; CL = 15 pF, S2 闭合（见图 5、6） | 5 | ||
| Driver enable to output low, shutdown | tDZL(SHDN) | 4500 | ns | 关断条件下; CL = 15 pF, S1 闭合（见图 5、6） | 5 | ||
| Receiver input-to-output propagation delay, low to high | tRPLH | 127 | 200 | ns | VID≥2.0V; 上升与下降沿时间 VID≤15 ns; 见图 7 与图 8 | 6 | |
| Receiver input-to-output propagation delay, high to low | tRPHL | 127 | 200 | ns | 见图 7 与图 8 | 6 | |
| Receiver skew /tRPLH - tRPHL/ | tSKEW2 | 3 | 30 | ns | 见图 7 与图 8 | 6 | |
| Receiver enable to output low | tRZL | 20 | 50 | ns | CL = 100 pF, S1 闭合（见图 9、10） | 6 | |
| Receiver enable to output high | tRZH | 20 | 50 | ns | CL = 100 pF, S2 闭合（见图 9、10） | 6 | |
| Receiver output low to disable | tRLZ | 20 | 50 | ns | CL = 100 pF, S1 闭合（见图 9、10） | 6 | |
| Receiver output high to disable | tRHZ | 20 | 50 | ns | CL = 100 pF, S2 闭合（见图 9、10） | 6 | |
| Receiver enable to output high, shutdown | tRZH(SHDN) | 3500 | ns | 关断状态下; CL = 100 pF, S2 闭合（见图 9、10） | 6 | ||
| Receiver enable to output low, shutdown | tRZL(SHDN) | 3500 | ns | 关断状态下; CL = 100 pF, S1 闭合（见图 9、10） | 6 | ||
| Time to enter shutdown | tSHDN | 50 | 200 | 600 | ns | /RE = 1, DE = 0 (NOTE2) | 6 |
| Thermal shutdown threshold temperature | 150 | ℃ | 4 | ||||
| Thermal shutdown hysteresis temperature | 20 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
MAX487CUA+T-TUDI - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
max487cua-t-tudi-etched.step/max487cua-t-tudi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max487cua-t-tudi.step/max487cua-t-tudi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tudi datasheet (10 pp, sha256
82811daa89709647, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).