main
History Download
Ray Publish 0.1.0 bae636a

MAX485ECSA+T

Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8

MAX485ECSA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: goes high if A > B by 200mV and low if A < B by 200mV, and is high impedance while RE is high.
2 RE input Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high.
3 DE input Driver output enable: the driver outputs (A and B) are enabled when DE is high and are high impedance when DE is low.
4 DI input Driver input: a low on DI forces output Y (A) low and Z (B) high, and a high on DI forces Y high and Z low.
5 GND power_in Ground reference for the device; all voltages are referenced to this pin unless otherwise specified.
6 A bidirectional Noninverting receiver input and noninverting driver output (Y); receiver common-mode range is -7V to +12V.
7 B bidirectional Inverting receiver input and inverting driver output (Z); receiver common-mode range is -7V to +12V.
8 VCC power_in Positive supply: 4.75V ≤ VCC ≤ 5.25V.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VCC) absolute maximum VCC 12 V 2
Control input voltage (RE, DE) RE, DE -0.5 V Max printed as (VCC + 0.5V) 2
Driver input voltage (DI) DI -0.5 V Max printed as (VCC + 0.5V) 2
Driver output voltage (Y, Z; A, B) Y, Z; A, B -8 12.5 V 2
Receiver input voltage (A, B) A, B -8 12.5 V 2
Receiver output voltage (RO) RO -0.5 V Max printed as (VCC + 0.5V) 2
Storage temperature range TSTG -65 160 °C 2
Lead temperature (soldering) 300 °C soldering, 10 sec 2
Operating temperature range (MAX485EC, commercial) TA 0 70 °C MAX4__C__ / MAX1487EC__A range 2
Positive supply voltage VCC 4.75 5 5.25 V Pin description: 4.75V ≤ VCC ≤ 5.25V 7
Differential driver output (no load) VOD1 5 V no load 2
Driver common-mode output voltage VOC 3 V R = 27Ω or 50Ω, Figure 8 2
Change in magnitude of driver differential output voltage for complementary output states ΔVOD 0.2 V R = 27Ω or 50Ω, Figure 8 2
Change in magnitude of driver common-mode output voltage for complementary output states ΔVOD 0.2 V R = 27Ω or 50Ω, Figure 8 2
Differential driver output (with load), RS-422 VOD2 1.5 5 V R = 50Ω (RS-422) 2
Differential driver output (with load), RS-485 VOD2 2 V R = 27Ω (RS-485), Figure 8 2
Input high voltage VIH 2 V DE, DI, RE 2
Input low voltage VIL 0.8 V DE, DI, RE 2
Input current IIN1 -2 2 µA DE, DI, RE 2
Receiver differential threshold voltage VTH -0.2 0.2 V -7V ≤ VCM ≤ 12V 2
Receiver output high voltage VOH 3.5 V IO = -4mA, VID = 200mV 2
Receiver output low voltage VOL 0.4 V IO = 4mA, VID = -200mV 2
Three-state (high impedance) output current at receiver IOZR -1 1 µA 0.4V ≤ VO ≤ 2.4V 2
Receiver input resistance RIN 12 kΩ -7V ≤ VCM ≤ 12V 2
Receiver short-circuit current IOSR 7 95 mA 0V ≤ VO ≤ VCC 3
Driver short-circuit current, VO = low IOSD2 35 250 mA -7V ≤ VO ≤ 12V (Note 4) 3
Driver short-circuit current, VO = high IOSD1 35 250 mA -7V ≤ VO ≤ 12V (Note 4) 3
Maximum data rate fMAX 2.5 Mbps 3
Driver input to output, low-to-high tPLH 10 40 60 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver input to output, high-to-low tPHL 10 40 60 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver output skew to output tSKEW 5 10 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver rise or fall time tR, tF 3 20 40 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver enable to output high tZH 45 70 ns Figures 11 and 13 3
Driver enable to output low tZL 45 70 ns Figures 11 and 13 3
Driver disable time from low tLZ 45 70 ns Figures 11 and 13 3
Driver disable time from high tHZ 45 70 ns Figures 11 and 13 3
Receiver enable to output low tZL 20 50 ns Figures 9 and 15, CRL = 15pF 3
Receiver enable to output high tZH 20 50 ns Figures 9 and 15, CRL = 15pF 3
Receiver disable time from low tLZ 20 50 ns Figures 9 and 15, CRL = 15pF 3
Receiver disable time from high tHZ 20 50 ns Figures 9 and 15, CRL = 15pF 3
ESD protection (Human Body Model) -15 15 kV A, B, Y and Z pins, Human Body Model 3

CAD (KiCad official)

  • Symbol: MAX485ECSA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: max485ecsa-t-etched.step / max485ecsa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max485ecsa-t.step / max485ecsa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (16 pp, sha256 122a01b41005edf1, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF