3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX485CUA+T
Analog Devices Inc./Maxim Integrated · RS-485/RS-422 ICs · MSOP-8
MAX485CUA+T from Analog Devices Inc./Maxim Integrated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | bidirectional | Inverting receiver input and inverting driver output, with bus range of -8V to +12.5V. |
| 2 | VCC | power_in | Positive supply, 4.75V ≤ VCC ≤ 5.25V. |
| 3 | RO | output | Receiver output: high if A > B by 200mV, low if A < B by 200mV, and high impedance when RE is high. |
| 4 | RE | input | Receiver output enable, active low: RO is enabled when RE is low and high impedance when RE is high. |
| 5 | DE | input | Driver output enable: driver outputs are enabled when DE is high and high impedance when DE is low. |
| 6 | DI | input | Driver input: a low forces the non-inverting output low and the inverting output high, and a high does the opposite. |
| 7 | GND | power_in | Ground. |
| 8 | A | bidirectional | Noninverting receiver input and noninverting driver output, with bus range of -8V to +12.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | MSOP-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 12 | V | 2 | |||
| Control Input Voltage (RE, DE) | -0.5 | V | to (VCC + 0.5V) | 2 | |||
| Driver Input Voltage (DI) | -0.5 | V | to (VCC + 0.5V) | 2 | |||
| Driver Output Voltage (A, B) | -8 | 12.5 | V | 2 | |||
| Receiver Input Voltage (A, B) | -8 | 12.5 | V | 2 | |||
| Receiver Output Voltage (RO) | -0.5 | V | to (VCC + 0.5V) | 2 | |||
| Operating Temperature Range (MAX485C) | 0 | 70 | °C | MAX4__C__ | 2 | ||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10sec | 2 | |||
| Supply Voltage | VCC | 4.75 | 5 | 5.25 | V | VCC = 5V ±5% | 7 |
| Differential Driver Output (no load) | VOD1 | 5 | V | 2 | |||
| Differential Driver Output (with load) | VOD2 | 1.5 | 5 | V | R = 27Ω (RS-485), Figure 4 | 2 | |
| Change in Magnitude of Driver Differential Output Voltage | ΔVOD | 0.2 | V | R = 27Ω or 50Ω, Figure 4 | 2 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | R = 27Ω or 50Ω, Figure 4 | 2 | ||
| Change in Magnitude of Driver Common-Mode Output Voltage | ΔVOC | 0.2 | V | R = 27Ω or 50Ω, Figure 4 | 2 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE | 2 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 2 | ||
| Input Current | IIN1 | -2 | 2 | µA | DE, DI, RE | 2 | |
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V | 2 | |
| Receiver Input Hysteresis | ΔVTH | 70 | mV | VCM = 0V | 2 | ||
| Receiver Output High Voltage | VOH | 3.5 | V | IO = -4mA, VID = 200mV | 2 | ||
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = 4mA, VID = -200mV | 2 | ||
| Three-State Output Current at Receiver | IOZR | -1 | 1 | µA | 0.4V ≤ VO ≤ 2.4V | 2 | |
| Receiver Input Resistance | RIN | 12 | kΩ | -7V ≤ VCM ≤ 12V, all devices except MAX487/MAX1487 | 2 | ||
| No-Load Supply Current | ICC | 300 | 500 | µA | MAX481/MAX485, RE = 0V or VCC, DE = 0V | 3 | |
| No-Load Supply Current | ICC | 500 | 900 | µA | MAX481/MAX485, RE = 0V or VCC, DE = VCC | 3 | |
| Driver Short-Circuit Current, VO = High | IOSD1 | 35 | 250 | mA | -7V ≤ VO ≤12V (Note 4) | 3 | |
| Driver Short-Circuit Current, VO = Low | IOSD2 | 35 | 250 | mA | -7V ≤ VO ≤12V (Note 4) | 3 | |
| Receiver Short-Circuit Current | IOSR | 7 | 95 | mA | 0V ≤ VO ≤ VCC | 3 | |
| Driver Input to Output | tPLH, tPHL | 10 | 30 | 60 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver Output Skew to Output | tSKEW | 5 | 10 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Driver Rise or Fall Time | tR, tF | 3 | 15 | 40 | ns | Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver Enable to Output High | tZH | 40 | 70 | ns | Figures 7 and 9, CL = 100pF, S2 closed | 3 | |
| Driver Enable to Output Low | tZL | 40 | 70 | ns | Figures 7 and 9, CL = 100pF, S1 closed | 3 | |
| Driver Disable Time from Low | tLZ | 40 | 70 | ns | Figures 7 and 9, CL = 15pF, S1 closed | 3 | |
| Driver Disable Time from High | tHZ | 40 | 70 | ns | Figures 7 and 9, CL = 15pF, S2 closed | 3 | |
| Receiver Input to Output | tPLH, tPHL | 20 | 90 | 200 | ns | Figures 6 and 10, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Differential Receiver Skew | tSKD | 13 | ns | / tPLH - tPHL /, Figures 6 and 10, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | ||
| Receiver Enable to Output Low | tZL | 20 | 50 | ns | Figures 5 and 11, CRL = 15pF, S1 closed | 3 | |
| Receiver Enable to Output High | tZH | 20 | 50 | ns | Figures 5 and 11, CRL = 15pF, S2 closed | 3 | |
| Receiver Disable Time from Low | tLZ | 20 | 50 | ns | Figures 5 and 11, CRL = 15pF, S1 closed | 3 | |
| Receiver Disable Time from High | tHZ | 20 | 50 | ns | Figures 5 and 11, CRL = 15pF, S2 closed | 3 | |
| Maximum Data Rate | fMAX | 2.5 | Mbps | 3 |
CAD (KiCad official)
- Symbol:
MAX485CUA+T - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
max485cua-t-etched.step/max485cua-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max485cua-t.step/max485cua-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (17 pp, sha256
b7888c0d45b0dc58, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).