main
Ray Publish 0.1.0 5567b99

MAX483CUA+T-TUDI

Tudi · RS-485 / RS-422 ICs · MSOP-8

MAX483CUA+T-TUDI from Tudi, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with /RE low, RO is high if A-B >= -50mV and low if A-B <= -200mV, and it is high-impedance when /RE is high.
2 /RE input Receiver output enable: low enables RO, high puts RO in high impedance, and /RE high with DE low puts the device in low-power shutdown.
3 DE input Driver output enable: high enables the driver outputs, low puts them in high impedance, and DE low with /RE high puts the device in low-power shutdown.
4 DI input Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low.
5 GND power_in Ground.
6 A bidirectional Non-inverting receiver input and non-inverting driver output, with a bus-side input voltage range of -7V to 13V.
7 B bidirectional Inverting receiver input and inverting driver output, with a bus-side input voltage range of -7V to 13V.
8 VCC power_in Power supply pin, operating range 4.75 to 5.25V, absolute maximum +7V.

Key specifications

Parameter Value
Manufacturer Tudi
Package MSOP-8
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: MAX483CUA+T-TUDI
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: max483cua-t-tudi-etched.step / max483cua-t-tudi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max483cua-t-tudi.step / max483cua-t-tudi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tudi datasheet (10 pp, sha256 5b1936937a12bd19, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF