component
MAX4595DCKR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX4595DCKR
Texas Instruments · Analog Switches, Multiplexers · SC-70-5
MAX4595DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COM | passive | Common analog switch terminal that connects to NC when IN is low, with signals up to V+ transmitted in either direction. |
| 2 | NC | unconnected | Normally closed analog terminal that is connected to COM when IN is low, with an analog signal range of 0 to V+ and ON-state resistance of 10 Ω typical at 5 V. |
| 3 | GND | power_in | Digital ground reference; continuous current through GND is limited to -100 mA by the absolute maximum ratings. |
| 4 | IN | input | Digital control input that connects COM to NC; it is TTL/CMOS compatible and 5.5-V tolerant, with VIH minimum 2.4 V and VIL maximum 0.8 V at a 5-V supply. |
| 5 | V+ | power_in | Positive power supply for the single-supply operating range of 2 V to 5.5 V, with an absolute maximum supply voltage of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Interface |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
MAX4595DCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
max4595dckr-etched.step/max4595dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4595dckr.step/max4595dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
3f8bc2eed8d4d954, retrieved 2026-10-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).