Generated by kicad-footprint-generator · KiCad file format 20260206
MAX4471ESA+T
Analog Devices Inc./Maxim Integrated · Operational Amplifier · SOIC-8
MAX4471ESA+T from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier output for Channel A, which swings rail-to-rail and can source and sink 11mA with a +5V supply. |
| 2 | INA- | input | Inverting amplifier input for Channel A; the common-mode range extends down to VSS and the amplifier does not phase-reverse when the input is overdriven. |
| 3 | INA+ | input | Noninverting amplifier input for Channel A; the ground-sensing common-mode input range extends from VSS to VDD - 1.1V. |
| 4 | VSS | power_in | Negative power-supply voltage (ground in single-supply operation), to which the ground-sensing input range is referenced. |
| 5 | INB+ | input | Noninverting amplifier input for Channel B; the ground-sensing common-mode input range extends from VSS to VDD - 1.1V. |
| 6 | INB- | input | Inverting amplifier input for Channel B; the common-mode range extends down to VSS and the amplifier does not phase-reverse when the input is overdriven. |
| 7 | OUTB | output | Amplifier output for Channel B, which swings rail-to-rail and can source and sink 11mA with a +5V supply. |
| 8 | VDD | power_in | Positive power-supply voltage; the device operates from +1.8V to +5.5V and should be bypassed with a 0.1µF ceramic capacitor placed close to the VDD pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 1.8 | 5.5 | V | Guaranteed by PSRR tests | 2 | |
| Supply Current (per amplifier) | IDD | 0.75 | 1.2 | µA | VDD = +5.0V, 25°C | 2 | |
| Supply Current (per amplifier) | IDD | 0.6 | µA | VDD = +1.8V, 25°C | 2 | ||
| Input Offset Voltage | VOS | -7 | 0.5 | 7 | mV | 2 | |
| Input Bias Current | IB | -1500 | 200 | 1500 | pA | 2 | |
| Input Offset Current | IOS | 12.5 | pA | 2 | |||
| Common-Mode Rejection Ratio | CMRR | 70 | 95 | dB | Specified with VSS ≤ VCM ≤ (VDD - 1.1V) | 2 | |
| Power-Supply Rejection Ratio | PSRR | 70 | 90 | dB | +1.8V ≤ VDD ≤ +5.5V | 2 | |
| Large-Signal Voltage Gain | AVOL | 90 | 120 | dB | RL = 1MΩ, VOUT = 50mV to VDD - 50mV | 2 | |
| Large-Signal Voltage Gain | AVOL | 90 | 112 | dB | RL = 100kΩ, VOUT = 200mV to VDD - 200mV | 2 | |
| Large-Signal Voltage Gain | AVOL | 100 | dB | RL = 10kΩ, VOUT = 200mV to VDD - 200mV | 2 | ||
| Output Voltage Swing High (VDD - VOH) | VOH | 14 | mV | RL = 1MΩ | 2 | ||
| Output Voltage Swing High (VDD - VOH) | VOH | 4 | 10 | mV | RL = 100kΩ | 2 | |
| Output Voltage Swing High (VDD - VOH) | VOH | 40 | mV | RL = 10kΩ | 2 | ||
| Output Voltage Swing Low (VOL - VSS) | VOL | 0.5 | 5 | mV | RL = 1MΩ | 2 | |
| Output Voltage Swing Low (VOL - VSS) | VOL | 15 | mV | RL = 100kΩ | 2 | ||
| Output Voltage Swing Low (VOL - VSS) | VOL | 10 | mV | RL = 10kΩ | 2 | ||
| Gain-Bandwidth Product (MAX4470/MAX4471/MAX4472) | GBW | 9 | kHz | 2 | |||
| Phase Margin (MAX4470/MAX4471/MAX4472) | φM | 90 | degrees | 2 | |||
| Slew Rate (MAX4470/MAX4471/MAX4472) | SR | 2 | V/ms | VOUT = 4V step | 3 | ||
| Input Voltage Noise Density | en | 150 | nV/√Hz | f = 1kHz | 3 | ||
| Input Voltage Noise Density | en | 120 | nV/√Hz | f = 10kHz | 3 | ||
| Output Short-Circuit Current (sourcing) | IOUT | 11 | mA | Shorted to VSS | 3 | ||
| Output Short-Circuit Current (sinking) | IOUT | 36 | mA | Shorted to VDD | 3 | ||
| Power-On Time | tON | 3 | ms | 3 | |||
| Power-Off Time | tOFF | 2 | µs | 3 | |||
| Capacitive Load | CLOAD | 250 | pF | No sustained oscillations | 3 | ||
| Supply Voltage Range (TMIN to TMAX) | VDD | 1.8 | 5.5 | V | Guaranteed by PSRR tests, TA = TMIN to TMAX | 3 | |
| Supply Current per Amplifier (TMIN to TMAX) | IDD | 1.5 | µA | VDD = +5.0V, TA = TMIN to TMAX | 3 | ||
| Input Offset Voltage (TMIN to TMAX) | VOS | -15 | 15 | mV | TA = TMIN to TMAX | 3 | |
| Input Offset Voltage Temperature Coefficient | TCVOS | 8 | µV/°C | 3 | |||
| Input Bias Current (TMIN to TMAX) | IB | 4.25 | nA | TA = TMIN to TMAX | 3 | ||
| Common-Mode Rejection Ratio (TMIN to TMAX) | CMRR | 56 | dB | VSS ≤ VCM ≤ (VDD - 1.1V) | 3 | ||
| Power-Supply Rejection Ratio (TMIN to TMAX) | PSRR | 65 | dB | +1.8V ≤ VDD ≤ +5.5V, 0°C ≤ TA ≤ +85°C | 3 | ||
| Large-Signal Voltage Gain (TMIN to TMAX) | AVOL | 75 | dB | VOUT = 50mV to VDD - 50mV, RL = 1MΩ | 3 | ||
| Output Voltage Swing High (VDD - VOH) (TMIN to TMAX) | VOH | 5 | mV | RL = 1MΩ | 3 | ||
| Output Voltage Swing High (VDD - VOH) (TMIN to TMAX) | VOH | 15 | mV | RL = 100kΩ | 3 | ||
| Output Voltage Swing Low (VOL - VSS) (TMIN to TMAX) | VOL | 5 | mV | RL = 1MΩ | 3 | ||
| Supply Voltage | VDD to VSS | -0.3 | 6 | V | 2 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (soldering, 10s) | 300 | °C | Soldering, 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | Reflow | 2 |
CAD (KiCad official)
- Symbol:
MAX4471ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max4471esa-t-etched.step/max4471esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4471esa-t.step/max4471esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (19 pp, sha256
23dad23272985f10, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).