Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX4380EUT+T

Maxim Integrated · Operational Amplifier · SOT-23-6

MAX4380EUT+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, rail-to-rail, swinging to within 50mV of each supply rail with a 2kΩ load; goes to about 35kΩ high-impedance when disabled.
2 VEE power_in Negative power supply (ground in single-supply use); connect a 0.1µF capacitor to GND.
3 IN+ input Noninverting input; common-mode range extends from 0.2V below VEE to 2.25V below VCC.
4 IN- input Inverting input of the amplifier.
5 DISABLE input Disable control; connect to VCC to enable, and pull low (logic-low threshold VCC-3V) to put the output in high-impedance state.
6 VCC power_in Positive power supply, +4.5V to +11V single supply; connect a 0.1µF capacitor to GND.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOT-23-6
Category Operational Amplifier/Comparator
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (single supply) VOS 0.2 12 mV VCC=+5V, TA=+25°C 2
Input Offset Voltage over temperature (single supply) VOS 20 mV VCC=+5V, TA=-40°C to +85°C 2
Input Offset Voltage Tempco (single supply) TCVOS 8 µV/°C VCC=+5V, VEE=0 2
Input Bias Current (single supply) IB 6.5 20 µA VCC=+5V, VEE=0 2
Input Offset Current (single supply) IOS 0.5 7 µA VCC=+5V, VEE=0 2
Input Resistance, differential (single supply) RIN 70 kΩ Differential mode (-1V ≤ VIN ≤ +1V) 2
Input Resistance, common mode (single supply) RIN 3 MΩ Common mode (-0.2V ≤ VCM ≤ +2.75V) 2
Common-Mode Rejection Ratio (single supply) CMRR 70 95 dB VEE - 0.2V ≤ VCM ≤ VCC - 2.25V 2
Open-Loop Gain (single supply) AVOL 50 61 dB 0.25V ≤ VOUT ≤ 4.75V, RL = 2kΩ 2
Open-Loop Gain (single supply) AVOL 48 63 dB 0.8V ≤ VOUT ≤ 4.5V, RL = 150Ω 2
Open-Loop Gain (single supply) AVOL 58 dB 1V ≤ VOUT ≤ 4V, RL = 50Ω 2
Output Swing high VCC-VOH (single supply) VOUT 0.05 0.2 V RL = 2kΩ 2
Output Swing low VOL-VEE (single supply) VOUT 0.05 0.15 V RL = 2kΩ 2
Output Swing high VCC-VOH (single supply) VOUT 0.3 0.5 V RL = 150Ω 2
Output Swing low VOL-VEE (single supply) VOUT 0.25 0.8 V RL = 150Ω 2
Output Swing high VCC-VOH (single supply) VOUT 0.5 0.8 V RL = 75Ω 2
Output Swing low VOL-VEE (single supply) VOUT 0.5 1.75 V RL = 75Ω 2
Output Swing high VCC-VOH (single supply) VOUT 1 1.7 V RL = 75Ω to ground 2
Output Swing low VOL-VEE (single supply) VOUT 0.025 0.125 V RL = 75Ω to ground 2
Output Current sinking (single supply) IOUT 40 55 mA Sinking from RL = 75Ω to VCC 2
Output Current sourcing (single supply) IOUT 25 50 mA Sourcing into RL = 75Ω to VEE 2
Output Short-Circuit Current (single supply) ISC 100 mA Sinking or sourcing (printed ±100) 2
Open-Loop Output Resistance ROUT 8 Ω 2
Power-Supply Rejection Ratio (single supply) PSRR 50 62 dB VS = +4.5V to +5.5V 2
Operating Supply Voltage Range (single supply) VS 4.5 11 V Guaranteed by PSRR (Note 2) 3
Disabled Output Resistance (single supply) ROUT(OFF) 27 35 kΩ DISABLE_ = 0, 0 ≤ VOUT ≤ 5V 3
DISABLE_ Logic Input Low Current (single supply) IIL 25 60 µA DISABLE_ = 0 3
DISABLE_ Logic Input High Current (single supply) IIH 10 40 µA DISABLE_ = VCC 3
Quiescent Supply Current per amplifier (single supply) IS 5.5 9 mA DISABLE_ = VCC 3
Quiescent Supply Current per amplifier, disabled (single supply) IS 0.45 0.6 mA DISABLE_ = 0 3
Input Offset Voltage (dual supply) VOS 3 16 mV VCC=+5V, VEE=-5V, TA=+25°C 3
Input Offset Voltage over temperature (dual supply) VOS 24 mV TA = TMIN to TMAX 3
Input Offset Voltage Tempco (dual supply) TCVOS 8 µV/°C VCC=+5V, VEE=-5V 3
Input Bias Current (dual supply) IB 8.5 25 µA VCC=+5V, VEE=-5V 3
Input Offset Current (dual supply) IOS 0.5 12 µA VCC=+5V, VEE=-5V 3
Common-Mode Rejection Ratio (dual supply) CMRR 70 95 dB VEE ≤ VCM ≤ VCC - 2.25V 3
Open-Loop Gain (dual supply) AVOL 50 62 dB -4.5V ≤ VOUT ≤ +4.5V, RL = 2kΩ 3
Open-Loop Gain (dual supply) AVOL 48 65 dB -4.25V ≤ VOUT ≤ +4.25V, RL = 150Ω 3
Open-Loop Gain (dual supply) AVOL 60 dB -4V ≤ VOUT ≤ +4V, RL = 50Ω 3
Output Current sinking (dual supply) IOUT 50 75 mA Sinking from RL = 75Ω to VCC 4
Output Current sourcing (dual supply) IOUT 50 75 mA Sourcing into RL = 75Ω to VEE 4
Power-Supply Rejection Ratio (dual supply) PSRR 48 62 dB VS = ±4.5V to ±5.5V 4
Operating Supply Voltage Range (dual supply) VS -2.25 5.5 V Guaranteed by PSRR (Note 2); printed ±2.25 to ±5.5 4
Disabled Output Resistance (dual supply) ROUT(OFF) 27 35 kΩ DISABLE_ = 0, -5V ≤ VOUT ≤ 5V 4
Quiescent Supply Current per amplifier (dual supply) IS 7.5 10 mA DISABLE_ = VCC 4
Quiescent Supply Current per amplifier, disabled (dual supply) IS 0.45 0.8 mA DISABLE_ = 0 4
Supply Voltage (VCC to VEE) 12 V 2
Operating Temperature Range -40 85 °C 2
Junction Temperature 150 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C soldering, 10s 2
Small-Signal -3dB Bandwidth BWSS 210 MHz VOUT = 100mVp-p 4
Slew Rate SR 485 V/µs VOUT = 2V step 4
Settling Time to 0.1% tS 16 ns VOUT = 2V step 4

CAD (KiCad official)

  • Symbol: MAX4380EUT+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: max4380eut-t-etched.step / max4380eut-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max4380eut-t.step / max4380eut-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (16 pp, sha256 d73f6ad1f84f287f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF