component
MAX4335EXT+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Operational Amplifier, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX4335EXT+T
Analog Devices Inc Maxim Integrated · Operational Amplifier · SC-70-6
MAX4335EXT+T from Analog Devices Inc Maxim Integrated, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Noninverting input with a rail-to-rail input stage whose common-mode range spans GND to VCC, extending 0.25V beyond the supply rails. |
| 2 | GND | power_in | Ground reference for the single supply; absolute maximum ratings are referenced to GND, with supply voltage VCC to GND limited to -0.3V to +6V. |
| 3 | IN- | input | Inverting input protected from large differential voltages by 1kΩ series resistors and back-to-back diodes, with typical input resistance of 500kΩ for differential inputs below 1.2V. |
| 4 | OUT | output | Rail-to-rail output guaranteed to be within 400mV of the positive rail at VCC = 2.7V with a 32Ω load to VCC/2, with output current limited to 110mA by short-circuit protection. |
| 5 | N.C. | unconnected | No connection; not internally connected on the MAX4335 SC70 package. |
| 6 | VCC | power_in | Positive supply for single-supply operation from 2.7V to 5.5V, to be bypassed with a 0.1µF ceramic capacitor in parallel with at least 1µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage Range | VCC | 2.7 | 5.5 | V | Inferred from PSRR test; TA = +25°C | 2 | |
| Quiescent Supply Current (per amplifier) | ICC | 1.3 | 1.8 | mA | VCC = 5.5V; TA = +25°C | 2 | |
| Quiescent Supply Current (per amplifier) | ICC | 1.2 | mA | VCC = 2.7V; TA = +25°C | 2 | ||
| Input Offset Voltage | VOS | -3 | 0.6 | 3 | mV | VCM = GND to VCC; TA = +25°C | 2 |
| Input Bias Current | IB | -400 | 100 | 400 | nA | VCM = GND to VCC; TA = +25°C | 2 |
| Input Offset Current | IOS | -30 | 7 | 30 | nA | VCM = GND to VCC; TA = +25°C | 2 |
| Common-Mode Rejection Ratio | CMRR | 60 | 80 | dB | VCM = GND to VCC; TA = +25°C | 2 | |
| Power-Supply Rejection Ratio | PSRR | 70 | 90 | dB | VCC = 2.7V to 5.5V; TA = +25°C | 2 | |
| Large-Signal Voltage Gain | AVOL | 95 | dB | VCC = 5V; RL = 10kΩ; VOUT = 0.4V to 4.6V; TA = +25°C | 2 | ||
| Large-Signal Voltage Gain | AVOL | 70 | 84 | dB | VCC = 5V; RL = 100Ω; VOUT = 0.5V to 4.5V; TA = +25°C | 2 | |
| Large-Signal Voltage Gain | AVOL | 62 | 72 | dB | VCC = 2.7V; RL = 32Ω; VOUT = 0.5V to 2.2V; TA = +25°C | 2 | |
| Output Voltage Swing (VCC - VOH) | VOUT | 100 | mV | VCC = 2.7V; RL = 10kΩ; TA = +25°C | 2 | ||
| Output Voltage Swing (VOL) | VOUT | 100 | mV | VCC = 2.7V; RL = 10kΩ; TA = +25°C | 2 | ||
| Output Voltage Swing (VCC - VOH) | VOUT | 220 | 400 | mV | VCC = 2.7V; RL = 32Ω; TA = +25°C | 2 | |
| Output Voltage Swing (VOL) | VOUT | 280 | 400 | mV | VCC = 2.7V; RL = 32Ω; TA = +25°C | 2 | |
| Output Voltage Swing (VCC - VOH) | VOUT | 190 | 350 | mV | VCC = 5V; RL = 100Ω; TA = +25°C | 2 | |
| Output Voltage Swing (VOL) | VOUT | 240 | 350 | mV | VCC = 5V; RL = 100Ω; TA = +25°C | 2 | |
| Output Drive (VCC - VOH) | IOUT | 270 | 500 | mV | VCC = 2.7V; ISOURCE, ISINK = 50mA; TA = +25°C | 3 | |
| Output Drive (VOL) | IOUT | 360 | 500 | mV | VCC = 2.7V; ISOURCE, ISINK = 50mA; TA = +25°C | 3 | |
| Operating Supply Voltage Range | VCC | 2.7 | 5.5 | V | Inferred from PSRR test; TA = -40°C to +85°C | 3 | |
| Quiescent Supply Current (per amplifier) | ICC | 2.25 | mA | VCC = 5.5V; TA = -40°C to +85°C | 3 | ||
| Input Offset Voltage | VOS | -6 | 6 | mV | VCM = GND to VCC; TA = -40°C to +85°C | 3 | |
| Input Bias Current | IB | -600 | 600 | nA | VCM = GND to VCC; TA = -40°C to +85°C | 3 | |
| Input Offset Current | IOS | -60 | 60 | nA | VCM = GND to VCC; TA = -40°C to +85°C | 3 | |
| Common-Mode Rejection Ratio | CMRR | 50 | dB | VCM = GND to VCC; TA = -40°C to +85°C | 3 | ||
| Power-Supply Rejection Ratio | PSRR | 64 | dB | VCC = 2.7V to 5.5V; TA = -40°C to +85°C | 3 | ||
| Large-Signal Voltage Gain | AVOL | 66 | dB | VCC = 5V; RL = 100Ω; VOUT = 0.6V to 4.4V; TA = -40°C to +85°C | 3 | ||
| Large-Signal Voltage Gain | AVOL | 56 | dB | VCC = 2.7V; RL = 32Ω; VOUT = 0.6V to 2.1V; TA = -40°C to +85°C | 3 | ||
| Output Voltage Swing (VCC - VOH) | VOUT | 500 | mV | VCC = 2.7V; RL = 32Ω; TA = -40°C to +85°C | 4 | ||
| Output Voltage Swing (VOL) | VOUT | 500 | mV | VCC = 2.7V; RL = 32Ω; TA = -40°C to +85°C | 4 | ||
| Output Voltage Swing (VCC - VOH) | VOUT | 400 | mV | VCC = 5V; RL = 100Ω; TA = -40°C to +85°C | 4 | ||
| Output Voltage Swing (VOL) | VOUT | 400 | mV | VCC = 5V; RL = 100Ω; TA = -40°C to +85°C | 4 | ||
| Output Drive (VCC - VOH) | IOUT | 650 | mV | VCC = 2.7V; ISOURCE, ISINK = 50mA; TA = -40°C to +85°C | 4 | ||
| Output Drive (VOL) | IOUT | 650 | mV | VCC = 2.7V; ISOURCE, ISINK = 50mA; TA = -40°C to +85°C | 4 | ||
| Supply Voltage (VCC to GND) | VCC | -0.3 | 6 | V | VCC to GND | 2 | |
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX4335EXT+T - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
max4335ext-t-etched.step/max4335ext-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4335ext-t.step/max4335ext-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (17 pp, sha256
0fdbe06ab069eed3, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).