main
Ray Publish 0.1.1 d9dbe7c
{
  "slug": "max4291exk-t",
  "version": "0.1.1",
  "type": "component",
  "description": "Analog Devices Inc Maxim Integrated Operational Amplifier, SC-70-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "max4291exk+t"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max4291exk-t.kicad_sym",
    "max4291exk-t.kicad_mod",
    "max4291exk-t.glb",
    "max4291exk-t.step",
    "max4291exk-t.lbr",
    "docs/hero.png",
    "docs/max4291exk-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max4291exk-t-etched.glb",
    "max4291exk-t-etched.step"
  ],
  "visibility": "public",
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "MAX4291EXK+T",
    "manufacturer": "Analog Devices Inc Maxim Integrated",
    "package": "SC-70-5",
    "pin_count": 5,
    "category": "Operational Amplifier",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589878636561272832",
    "parts": {
      "symbol": "max4291exk-t.kicad_sym",
      "footprint": "max4291exk-t.kicad_mod",
      "model_3d": "max4291exk-t-etched.glb",
      "model_3d_plain": "max4291exk-t.glb",
      "model_3d_step": "max4291exk-t-etched.step",
      "model_3d_step_plain": "max4291exk-t.step",
      "lbr": "max4291exk-t.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "IN+",
        "type": "input",
        "description": "Noninverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN-."
      },
      {
        "number": "2",
        "name": "VEE",
        "type": "power_in",
        "description": "Negative supply rail. Connect to ground for single-supply operation (1.8V to 5.5V total), or to a negative rail for dual-supply operation (±0.9V to ±2.75V). Bypass with a 100nF capacitor."
      },
      {
        "number": "3",
        "name": "IN-",
        "type": "input",
        "description": "Inverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN+."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "output",
        "description": "Amplifier output. Rail-to-rail output stage swings to within 46mV of either supply rail with a 2kΩ load to VCC/2. Unity-gain stable for capacitive loads up to 100pF; typical output short-circuit current is 20mA."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply rail. 1.8V to 5.5V single-supply operation (referenced to VEE = GND), or +0.9V to +2.75V in dual-supply configuration. Bypass to VEE with a 100nF capacitor placed close to the pin."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2058219",
      "digikey": "MAX4291EXK+TTR-ND",
      "mouser": "700-MAX4291EXKT"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:07:14Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "MAX4291EXK+TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX4291EXKT",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "max4291exk-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.1,
          2,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max4291exk-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.1,
          2,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d49a6c1272404c06f042b050df075edffd00bd1d9fa82b64c44b04dd127955ec",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "org": "adom"
}