main
Ray
max4291exk-t: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ff25744
MAX4291EXK+T
Analog Devices Inc Maxim Integrated · Operational Amplifier · SC-70-5
MAX4291EXK+T from Analog Devices Inc Maxim Integrated, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Noninverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN-. |
| 2 | VEE | power_in | Negative supply rail. Connect to ground for single-supply operation (1.8V to 5.5V total), or to a negative rail for dual-supply operation (±0.9V to ±2.75V). Bypass with a 100nF capacitor. |
| 3 | IN- | input | Inverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN+. |
| 4 | OUT | output | Amplifier output. Rail-to-rail output stage swings to within 46mV of either supply rail with a 2kΩ load to VCC/2. Unity-gain stable for capacitive loads up to 100pF; typical output short-circuit current is 20mA. |
| 5 | VCC | power_in | Positive supply rail. 1.8V to 5.5V single-supply operation (referenced to VEE = GND), or +0.9V to +2.75V in dual-supply configuration. Bypass to VEE with a 100nF capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MAX4291EXK+TEXK-TMAX4291EXK+TMAX4291EXK+TEUK-T
CAD (KiCad official)
- Symbol:
MAX4291EXK+T - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
max4291exk-t-etched.step/max4291exk-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4291exk-t.step/max4291exk-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (None pp, sha256
21d1cb85076495af, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX4291EXK+T
**Analog Devices Inc Maxim Integrated** · Operational Amplifier · SC-70-5
MAX4291EXK+T from Analog Devices Inc Maxim Integrated, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Noninverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN-. |
| 2 | VEE | power_in | Negative supply rail. Connect to ground for single-supply operation (1.8V to 5.5V total), or to a negative rail for dual-supply operation (±0.9V to ±2.75V). Bypass with a 100nF capacitor. |
| 3 | IN- | input | Inverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN+. |
| 4 | OUT | output | Amplifier output. Rail-to-rail output stage swings to within 46mV of either supply rail with a 2kΩ load to VCC/2. Unity-gain stable for capacitive loads up to 100pF; typical output short-circuit current is 20mA. |
| 5 | VCC | power_in | Positive supply rail. 1.8V to 5.5V single-supply operation (referenced to VEE = GND), or +0.9V to +2.75V in dual-supply configuration. Bypass to VEE with a 100nF capacitor placed close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `MAX4291EXK+TEXK-T`
- `MAX4291EXK+T`
- `MAX4291EXK+TEUK-T`
## CAD (KiCad official)
- Symbol: `MAX4291EXK+T`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `max4291exk-t-etched.step` / `max4291exk-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max4291exk-t.step` / `max4291exk-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589878636561272832) (None pp, sha256 `21d1cb85076495af`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max4291exk-t-datasheet.pdf)