component
MAX4233AUB+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Operational Amplifier, MSOP-10. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMAX4233AUB+T
Analog Devices Inc Maxim Integrated · Operational Amplifier · MSOP-10
MAX4233AUB+T from Analog Devices Inc Maxim Integrated, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Op-amp A output. Rail-to-rail output stage capable of driving ~50mA into loads down to a few tens of ohms; swings within tens of mV of either supply rail with light loads. |
| 2 | INA- | input | Inverting input of op-amp A. High-impedance CMOS input; common-mode range extends rail-to-rail (V- to V+). |
| 3 | INA+ | input | Non-inverting input of op-amp A. High-impedance CMOS input; rail-to-rail common-mode range. |
| 4 | V+ | power_in | Positive supply rail. Operating range 2.7V to 5.5V referenced to V-/GND. Bypass with a 0.1µF ceramic capacitor to GND close to the pin. |
| 5 | SHDNA | input | Active-low shutdown for op-amp A. Drive low to disable amplifier A and place its output into a high-impedance state; drive high (or tie to V+) for normal operation. |
| 6 | SHDNB | input | Active-low shutdown for op-amp B. Drive low to disable amplifier B and place its output into a high-impedance state; drive high (or tie to V+) for normal operation. |
| 7 | INB+ | input | Non-inverting input of op-amp B. High-impedance CMOS input; rail-to-rail common-mode range. |
| 8 | INB- | input | Inverting input of op-amp B. High-impedance CMOS input; rail-to-rail common-mode range. |
| 9 | OUTB | output | Op-amp B output. Rail-to-rail output stage capable of driving ~50mA into loads down to a few tens of ohms; swings within tens of mV of either supply rail with light loads. |
| 10 | V- | power_in | Negative supply / ground. Tie to system ground for single-supply operation, or to the negative rail for split-supply operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | MSOP-10 |
| Category | Op-amp/Cmp |
| Pins | 10 |
Ordering variants
Same part, different packaging or reel option.
MAX4233AUB+T
CAD (KiCad official)
- Symbol:
MAX4233AUB+T - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
max4233aub-t-etched.step/max4233aub-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4233aub-t.step/max4233aub-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (1 pp, sha256
ea42b3f336e47523, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).